openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 22:52:34 +02:00
Code Issues Releases Wiki Activity

Add user interface to activate the Bus Pirate pull-up resistors

Browse Source 
When working with some flash chips using the Bus Pirate programmer, the
use of the Bus Pirate's on-board pull-up resistors is sometimes
necessary.

On v3 hardware the use of said pull-up resistors requires the user to apply a
voltage to the VPU pin of the Bus Pirate, and then command it to use them.
For v4 hardware which supports also fixed internal 3.3V and 5V sources no
documentation could be found.

Here is a link to information pertaining to what this patch does:
http://dangerousprototypes.com/docs/SPI_(binary)#0100wxyz_-_Configure_peripherals_w.3Dpower.2C_x.3Dpull-ups.2C_y.3DAUX.2C_z.3DCS

Bonus: small cleanup of superfluous stack variables.

Corresponding to flashrom svn r1641.

Signed-off-by: Brian Salcedo <bsalcedo@gmx.us>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Brian Salcedo <bsalcedo@gmx.us>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This commit is contained in:
Brian Salcedo 2013-01-03 20:44:30 +00:00 committed by Stefan Tauner
parent e34e3e8a49
commit 30dfdbaf3a
2 changed files with 40 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
buspirate_spi.c
View File

@ -201,14 +201,14 @@ out_shutdown:
int buspirate_spi_init(void)
{
char *dev = NULL;
char *speed = NULL;
char *tmp;
char *dev;
int i;
unsigned int fw_version_major = 0;
unsigned int fw_version_minor = 0;
int spispeed = 0x7;
int ret = 0;
int i;
int pullup = 0;
dev = extract_programmer_param("dev");
if (dev && !strlen(dev)) {
@ -220,18 +220,29 @@ int buspirate_spi_init(void)
return 1;
}
speed = extract_programmer_param("spispeed");
if (speed) {
for (i = 0; spispeeds[i].name; i++)
if (!strncasecmp(spispeeds[i].name, speed,
strlen(spispeeds[i].name))) {
tmp = extract_programmer_param("spispeed");
if (tmp) {
for (i = 0; spispeeds[i].name; i++) {
if (!strncasecmp(spispeeds[i].name, tmp, strlen(spispeeds[i].name))) {
spispeed = spispeeds[i].speed;
break;
}
}
if (!spispeeds[i].name)
msg_perr("Invalid SPI speed, using default.\n");
}
free(speed);
free(tmp);
tmp = extract_programmer_param("pullups");
if (tmp) {
if (strcasecmp("on", tmp) == 0)
pullup = 1;
else if (strcasecmp("off", tmp) == 0)
; // ignore
else
msg_perr("Invalid pullups state, not using them.\n");
}
free(tmp);
/* Default buffer size is 19: 16 bytes data, 3 bytes control. */
#define DEFAULT_BUFSIZE (16 + 3)
@ -395,12 +406,16 @@ int buspirate_spi_init(void)
}
/* Initial setup (SPI peripherals config): Enable power, CS high, AUX */
bp_commbuf[0] = 0x40 | 0xb;
bp_commbuf[0] = 0x40 | 0x0b;
if (pullup == 1) {
bp_commbuf[0] |= (1 << 2);
msg_pdbg("Enabling pull-up resistors.\n");
}
ret = buspirate_sendrecv(bp_commbuf, 1, 1);
if (ret)
return 1;
if (bp_commbuf[0] != 0x01) {
msg_perr("Protocol error while setting power/CS/AUX!\n");
msg_perr("Protocol error while setting power/CS/AUX(/Pull-up resistors)!\n");
return 1;
}

14
flashrom.8
View File

@ -637,6 +637,20 @@ where
can be
.BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M " or " 8M
(in Hz). The default is the maximum frequency of 8 MHz.
.sp
An optional pullups parameter specifies the use of the Bus Pirate internal pull-up resistors. This may be
needed if you are working with a flash ROM chip that you have physically removed from the board. Syntax is
.sp
.B " flashrom -p buspirate_spi:pullups=state"
.sp
where
.B state
can be
.BR on " or " off .
More information about the Bus Pirate pull-up resistors and their purpose is available at
.nh
.BR "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_resistors " .
Only the external supply voltage (Vpu) is supported as of this writing.
.SS
.BR "dediprog " programmer
An optional