doc: Final cleanup of remaining references to the old wiki website

Change-Id: Ie002c1242075c8becb59d26bd9c562c7616233c1
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/86676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

doc/classic_cli_manpage.rst

@@ -789,13 +789,43 @@ Some of these programmers have more info below.
 atavia programmer
 ^^^^^^^^^^^^^^^^^
 
+The VT6421A is a PATA/SATA PCI controller that can be found on various cheap PCI cards.
+Currently there is a `datasheet <http://spacehopper.org/mirrors/ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF>`_.
+
+There exists a patch for flashrom that makes it possible to access the attached flash chip,
+but it has problems with some cards. They seem to need an offset added to the chip address for unknown reasons.
+
 Due to the mysterious address handling of the VIA VT6421A controller the user can specify an offset with the::
 
         flashrom -p atavia:offset=addr
 
 syntax where ``addr`` will be interpreted as usual (leading 0x (0) for hexadecimal (octal) values, or else decimal).
-For more information please see `its wiki page <https://flashrom.org/VT6421A "its wiki page>`_.
 
+Cards found in the wild:
+
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+| Vendor	 | Model	        | rev.	 | country | lot code	| Chip	      |	Size [B] | Offset		| lspci |
++================+======================+========+=========+============+=============+==========+======================+=======+
+|		 |		        |	 |	   |		| W39V040BPZ  |	512k	 |			|	|
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+| Eminent	 | EM2001	        | 0910CD | Taiwan  | 2IA0022481	| SST49LF020A |	256k	 | 0xfff00000		| [2]	|
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+| "SATA CONNECT" | "High speed 2/4-port	| 0901CD | Taiwan  | 2IA0022471	| Pm49FL004   |	512k	 | 0xfff80000 =		| [3]	|
+|		 | Serial ATA card"     |	 |	   |		|	      |		 | 0xffffffff - size    |	|
+| 		 |		        |	 |	   |		|	      |		 | + 1 (aka phys_addr)	|	|
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+| Gembird	 |	SATA-3	        |	 |	   |		| W39V040C    |	512k	 |			|	|
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+|		 |	HZ-006	        |	 |	   |		| Pm39LV512   |	64k	 |			| [4]	|
++----------------+----------------------+--------+---------+------------+-------------+----------+----------------------+-------+
+
+* `[2] <http://paste.flashrom.org/view.php?id=1369>`_
+* `[3] <http://www.flashrom.org/pipermail/flashrom/2012-September/009992.html>`_
+* `[4] <http://www.flashrom.org/pipermail/flashrom/2012-December/010318.html>`_
+
+The revision consists of two characters that are printed below the "VT6421A" string on the chip
+prefixed by 4 numbers that encode the production year and week.
+The country is noted right of the revision.
 
 atapromise programmer
 ^^^^^^^^^^^^^^^^^^^^^

doc/how_to_support_flashrom.rst

@@ -94,11 +94,8 @@ As for specific ideas:
 #. If there is an announcement on the mailing list about new doc under review,
    have a look and you can join the review
 
-#. Help migrate information from `old website <https://wiki.flashrom.org/>`_ to `new website <https://www.flashrom.org/>`_.
+#. If you have been following the document and discovered something incorrect there, or outdated,
-   The rule is, all useful docs need to be migrated but they should be reviewed. Concrete example,
+   send a patch to update the document.
-   there are docs for programmers, written a while ago. If you are using the programmer regularly
-   you can review the existing doc and help update it (if needed) and then the updated doc will
-   go to the new website.
 
 #. New documentation welcome.
 

doc/index.rst

@@ -20,7 +20,6 @@
   how_to_support_flashrom
   how_to_add_docs
   documentation_license
-  Old wiki website <https://wiki.flashrom.org/>
 
 .. include:: intro.rst
 

doc/supported_hw/supported_prog/index.rst

@@ -10,7 +10,7 @@ If you can run flashrom locally, the command ``flashrom -L`` prints all devices
 (see :doc:`/classic_cli_manpage` for more details on command line options). The output of this command is long, so you might
 want to save it to file or grep.
 
-Patches to add/update documentation, or migrate docs from `old wiki website <https://wiki.flashrom.org/Supported_programmers>`_ are very much appreciated.
+Patches to add/update documentation are very much appreciated.
 
 .. toctree::
     :maxdepth: 1

flashrom.c

@@ -1528,27 +1528,27 @@ static void nonfatal_help_message(void)
 	if (is_internal_programmer())
 		msg_gerr("This means we have to add special support for your board, programmer or flash\n"
 			 "chip. Please report this to the mailing list at flashrom@flashrom.org or on\n"
-			 "IRC (see https://www.flashrom.org/Contact for details), thanks!\n"
+			 "chat channels (see https://flashrom.org/contact.html for details), thanks!\n"
 			 "-------------------------------------------------------------------------------\n"
 			 "You may now reboot or simply leave the machine running.\n");
 	else
 		msg_gerr("Please check the connections (especially those to write protection pins) between\n"
 			 "the programmer and the flash chip. If you think the error is caused by flashrom\n"
-			 "please report this to the mailing list at flashrom@flashrom.org or on IRC (see\n"
+			 "please report this to the mailing list at flashrom@flashrom.org or on chat (see\n"
-			 "https://www.flashrom.org/Contact for details), thanks!\n");
+			 "https://flashrom.org/contact.html for details), thanks!\n");
 }
 
 void emergency_help_message(void)
 {
 	msg_gerr("Your flash chip is in an unknown state.\n");
 	if (is_internal_programmer())
-		msg_gerr("Get help on IRC (see https://www.flashrom.org/Contact) or mail\n"
+		msg_gerr("Get help on chat (see https://flashrom.org/contact.html) or mail\n"
 			"flashrom@flashrom.org with the subject \"FAILED: <your board name>\"!"
 			"-------------------------------------------------------------------------------\n"
 			"DO NOT REBOOT OR POWEROFF!\n");
 	else
 		msg_gerr("Please report this to the mailing list at flashrom@flashrom.org or\n"
-			 "on IRC (see https://www.flashrom.org/Contact for details), thanks!\n");
+			 "on chat (see https://flashrom.org/contact.html for details), thanks!\n");
 }
 
 void list_programmers_linebreak(int startcol, int cols, int paren)

ichspi.c

@@ -2236,7 +2236,7 @@ static int init_ich_default(const struct programmer_cfg *cfg, void *spibar, enum
 		if (ich_spi_rw_restricted)
 			msg_pinfo("Not all flash regions are freely accessible by flashrom. This is "
 				  "most likely\ndue to an active ME. Please see "
-				  "https://flashrom.org/ME for details.\n");
+				  "https://flashrom.org/user_docs/management_engine.html for details.\n");
 	}
 
 	/* Handle PR registers */

util/git-hooks/commit-msg

@@ -28,7 +28,7 @@ unset GREP_OPTIONS
 CHANGE_ID_AFTER="Bug|Depends-On|Issue|Test|Feature|Fixes|Fixed|Staging-ID"
 MSG="$1"
 
-DEV_GUIDELINES_URL="https://www.flashrom.org/Development_Guidelines"
+DEV_GUIDELINES_URL="https://flashrom.org/dev_guide/development_guide.html"
 
 # Check for, and add if missing, a unique Change-Id
 #