diff --git a/chipdrivers.h b/chipdrivers.h
index fe1e598e2..04ffda636 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -77,6 +77,8 @@ int spi_disable_blockprotect_at25df_sec(struct flashctx *flash);
 int spi_disable_blockprotect_at25f512b(struct flashctx *flash);
 int spi_disable_blockprotect_at25fs010(struct flashctx *flash);
 int spi_disable_blockprotect_at25fs040(struct flashctx *flash);
+int spi_prettyprint_status_register_s33(struct flashctx *flash);
+int spi_disable_blockprotect_s33(struct flashctx *flash);
 int spi_prettyprint_status_register_sst25(struct flashctx *flash);
 int spi_prettyprint_status_register_sst25vf016(struct flashctx *flash);
 int spi_prettyprint_status_register_sst25vf040b(struct flashctx *flash);
diff --git a/flashchips.c b/flashchips.c
index 5e036aca0..9dd045eb8 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -4420,6 +4420,240 @@ const struct flashchip flashchips[] = {
 		.voltage	= {4500, 5500},
 	},
 
+	{
+		.vendor		= "Intel",
+		.name		= "25F160S33B8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F160S33B8,
+		.total_size	= 2048,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{8 * 1024, 8},
+					{64 * 1024, 31} // inaccessible
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Intel",
+		.name		= "25F160S33T8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F160S33T8,
+		.total_size	= 2048,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{64 * 1024, 31}, // inaccessible
+					{8 * 1024, 8}
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Intel",
+		.name		= "25F320S33B8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F320S33B8,
+		.total_size	= 4096,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{8 * 1024, 8},
+					{64 * 1024, 63} // inaccessible
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 64} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {4 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Intel",
+		.name		= "25F320S33T8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F320S33T8,
+		.total_size	= 4096,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{64 * 1024, 63}, // inaccessible
+					{8 * 1024, 8}
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 64} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {4 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Intel",
+		.name		= "25F640S33B8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F640S33B8,
+		.total_size	= 8192,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{8 * 1024, 8},
+					{64 * 1024, 127} // inaccessible
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
+	{
+		.vendor		= "Intel",
+		.name		= "25F640S33T8",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= INTEL_ID,
+		.model_id	= INTEL_25F640S33T8,
+		.total_size	= 8192,
+		.page_size	= 256,
+		/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				/* This chip supports erasing of the 8 so-called "parameter blocks" with
+				 * opcode 0x40. Trying to access an address outside these 8 8kB blocks does
+				 * have no effect on the memory contents, but sets a flag in the SR.
+				.eraseblocks = {
+					{64 * 1024, 127}, // inaccessible
+					{8 * 1024, 8}
+				},
+				.block_erase = spi_block_erase_40,
+			}, { */
+				.eraseblocks = { {64 * 1024, 128} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {8 * 1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_s33,
+		.unlock		= spi_disable_blockprotect_s33,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,	/* also fast read 0x0B */
+		.voltage	= {2700, 3600},
+	},
+
 	{
 		.vendor		= "Intel",
 		.name		= "28F001BN/BX-B",
diff --git a/flashchips.h b/flashchips.h
index f10fbaee5..073f4eb35 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -364,6 +364,12 @@
 #define INTEL_28F008B3B		0xD3	/* 28F008B3-B */
 #define INTEL_28F004B3T		0xD4	/* 28F004B3-T */
 #define INTEL_28F004B3B		0xD5	/* 28F004B3-B */
+#define INTEL_25F160S33B8	0x8911	/* Same as 25F016S33B8 */
+#define INTEL_25F320S33B8	0x8912
+#define INTEL_25F640S33B8	0x8913
+#define INTEL_25F160S33T8	0x8915	/* Same as 25F016S33T8 */
+#define INTEL_25F320S33T8	0x8916
+#define INTEL_25F640S33T8	0x8917
 
 #define SHARP_LH28F008SA	0xA2	/* Sharp chip, Intel Vendor ID */
 #define SHARP_LH28F008SC	0xA6	/* Sharp chip, Intel Vendor ID */
diff --git a/spi25_statusreg.c b/spi25_statusreg.c
index 84e8f6390..2e01c06d6 100644
--- a/spi25_statusreg.c
+++ b/spi25_statusreg.c
@@ -468,6 +468,29 @@ int spi_disable_blockprotect_at25fs040(struct flashctx *flash)
 	return spi_disable_blockprotect_generic(flash, 0x7C, 1 << 7, 0);
 }
 
+/* === Intel === */
+
+/* TODO: Clear P_FAIL and E_FAIL with Clear SR Fail Flags Command (30h) here? */
+int spi_disable_blockprotect_s33(struct flashctx *flash)
+{
+	return spi_disable_blockprotect_generic(flash, 0x1C, 1 << 7, 0);
+}
+
+int spi_prettyprint_status_register_s33(struct flashctx *flash)
+{
+	uint8_t status = spi_read_status_register(flash);
+	msg_cdbg("Chip status register is %02x\n", status);
+
+	spi_prettyprint_status_register_srwd(status);
+	msg_cdbg("Chip status register: Program Fail Flag (P_FAIL) is %sset\n",
+		 (status & (1 << 6)) ? "" : "not ");
+	msg_cdbg("Chip status register: Erase Fail Flag (E_FAIL) is %sset\n",
+		 (status & (1 << 5)) ? "" : "not ");
+	spi_prettyprint_status_register_bp(status, 2);
+	spi_prettyprint_status_register_welwip(status);
+	return 0;
+}
+
 /* === SST === */
 
 static void spi_prettyprint_status_register_sst25_common(uint8_t status)