openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 23:22:37 +02:00
Code Issues Releases Wiki Activity

dediprog: tremendously improve performance on SF600 by ignoring the spec

Browse Source 
The solution was discovered in a collaborative bug hunt with testing done by
David Hendricks. The actual culprit was found by Urja Rannikko by comparing
vanilla flashrom with David's version in chromiumos.

Corresponding to flashrom svn r1933.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: David Hendricks <dhendrix@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This commit is contained in:
Stefan Tauner 2016-02-20 20:53:46 +00:00
parent 2c57bbee3c
commit 74367bf314
1 changed files with 10 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
dediprog.c
View File

@ -694,6 +694,14 @@ static int dediprog_spi_send_command(struct flashctx *flash,
if (readcnt == 0) // If we don't require a response, we are done here
return 0;
/* The specifications do state the possibility to set a timeout for transceive transactions.
* Apparently the "timeout" is a delay, and you can use long delays to accelerate writing - in case you
* can predict the time needed by the previous command or so (untested). In any case, using this
* "feature" to set sane-looking timouts for the read below will completely trash performance with
* SF600 and/or firmwares >= 6.0 while they seem to be benign on SF100 with firmwares <= 5.5.2. *shrug*
*
* The specification also uses only 0 in its examples, so the lesson to learn here:
* "Never trust the description of an interface in the documentation but use the example code and pray."
const uint8_t read_timeout = 10 + readcnt/512;
if (is_new_prot()) {
idx = 0;
@ -703,6 +711,8 @@ static int dediprog_spi_send_command(struct flashctx *flash,
value = min(read_timeout, 0xFF); // Possibly two bytes but we play safe here
}
ret = dediprog_read(CMD_TRANSCEIVE, value, idx, readarr, readcnt);
*/
ret = dediprog_read(CMD_TRANSCEIVE, 0, 0, readarr, readcnt);
if (ret != readcnt) {
msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, libusb_error_name(ret));
return 1;