openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-10-31 13:20:42 +01:00
Code Issues Releases Wiki Activity

dediprog: add support for SF600

Browse Source 
This patch is based on a number of changes by David Woodhouse and
David Hendricks.

SF600 uses two bulk endpoints, 1 for out and 2 for in unlike the
SF100 that uses only a single one. This patch make endpoint usage
more explicit and sets the in/out endpoint(s) appropriately for
SF100 and SF600.

Also, change all SF100-specific strings in messages and
leave standalone mode on SF600s.

Corresponding to flashrom svn r1927.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This commit is contained in:
David Woodhouse
2016-02-18 21:42:15 +00:00
committed by Stefan Tauner
parent f2daacac7b
commit 7f3b89fe02
1 changed files with 65 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

79
dediprog.c
View File

@@ -45,7 +45,14 @@
#define REQTYPE_EP_OUT (USB_ENDPOINT_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) /* 0x42 */
#define REQTYPE_EP_IN (USB_ENDPOINT_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) /* 0xC2 */
static usb_dev_handle *dediprog_handle;
static int dediprog_endpoint;
static int dediprog_in_endpoint;
static int dediprog_out_endpoint;
enum dediprog_devtype {
DEV_UNKNOWN = 0,
DEV_SF100 = 100,
DEV_SF600 = 600,
};
enum dediprog_leds {
LED_INVALID = -1,
@@ -127,16 +134,26 @@ enum dediprog_writemode {
WRITE_MODE_4B_ADDR_256B_PAGE_PGM_FLAGS = 12,
};
enum dediprog_standalone_mode {
ENTER_STANDALONE_MODE = 0,
LEAVE_STANDALONE_MODE = 1,
};
static int dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0);
enum dediprog_devtype dediprog_devicetype = DEV_UNKNOWN;
/* Returns true if firmware (and thus hardware) supports the "new" protocol */
static bool is_new_prot(void)
{
/* if (SF100) */
return dediprog_firmwareversion >= FIRMWARE_VERSION(5, 5, 0);
/* else if (SF600)
return dediprog_firmwareversion >= FIRMWARE_VERSION(6, 9, 0); */
switch (dediprog_devicetype) {
case DEV_SF100:
return dediprog_firmwareversion >= FIRMWARE_VERSION(5, 5, 0);
case DEV_SF600:
return dediprog_firmwareversion >= FIRMWARE_VERSION(6, 9, 0);
default:
return 0;
}
}
static int dediprog_read(enum dediprog_cmds cmd, unsigned int value, unsigned int idx, uint8_t *bytes, size_t size)
@@ -340,7 +357,7 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, unsigned
unsigned int i;
for (i = 0; i < count; i++) {
ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_endpoint,
ret = usb_bulk_read(dediprog_handle, 0x80 | dediprog_in_endpoint,
(char *)buf + i * chunksize, chunksize,
DEFAULT_TIMEOUT);
if (ret != chunksize) {
@@ -447,7 +464,7 @@ static int dediprog_spi_bulk_write(struct flashctx *flash, const uint8_t *buf, u
char usbbuf[512];
memcpy(usbbuf, buf + i * chunksize, chunksize);
memset(usbbuf + chunksize, 0xff, sizeof(usbbuf) - chunksize); // fill up with 0xFF
ret = usb_bulk_write(dediprog_handle, dediprog_endpoint, usbbuf, 512, DEFAULT_TIMEOUT);
ret = usb_bulk_write(dediprog_handle, dediprog_out_endpoint, usbbuf, 512, DEFAULT_TIMEOUT);
if (ret != 512) {
msg_perr("SPI bulk write failed, expected %i, got %i %s!\n", 512, ret, usb_strerror());
return 1;
@@ -575,7 +592,6 @@ static int dediprog_spi_send_command(struct flashctx *flash,
static int dediprog_check_devicestring(void)
{
int ret;
int fw[3];
char buf[0x11];
/* Command Receive Device String. */
@@ -586,16 +602,24 @@ static int dediprog_check_devicestring(void)
}
buf[0x10] = '\0';
msg_pdbg("Found a %s\n", buf);
if (memcmp(buf, "SF100", 0x5) != 0) {
msg_perr("Device not a SF100!\n");
if (memcmp(buf, "SF100", 0x5) == 0)
dediprog_devicetype = DEV_SF100;
else if (memcmp(buf, "SF600", 0x5) == 0)
dediprog_devicetype = DEV_SF600;
else {
msg_perr("Device not a SF100 or SF600!\n");
return 1;
}
if (sscanf(buf, "SF100 V:%d.%d.%d ", &fw[0], &fw[1], &fw[2]) != 3) {
int sfnum;
int fw[3];
if (sscanf(buf, "SF%d V:%d.%d.%d ", &sfnum, &fw[0], &fw[1], &fw[2]) != 4 ||
sfnum != dediprog_devicetype) {
msg_perr("Unexpected firmware version string '%s'\n", buf);
return 1;
}
/* Only these major versions were tested. */
if (fw[0] < 2 || fw[0] > 6) {
if (fw[0] < 2 || fw[0] > 7) {
msg_perr("Unexpected firmware version %d.%d.%d!\n", fw[0], fw[1], fw[2]);
return 1;
}
@@ -623,6 +647,23 @@ static int dediprog_device_init(void)
return 0;
}
static int dediprog_standalone_mode(void)
{
int ret;
if (dediprog_devicetype != DEV_SF600)
return 0;
msg_pdbg2("Disabling standalone mode.\n");
ret = dediprog_write(CMD_SET_STANDALONE, LEAVE_STANDALONE_MODE, 0, NULL, 0);
if (ret) {
msg_perr("Failed to disable standalone mode: %s\n", usb_strerror());
return 1;
}
return 0;
}
#if 0
/* Something.
* Present in eng_detect_blink.log with firmware 3.1.8
@@ -737,6 +778,7 @@ static const struct spi_master spi_master_dediprog = {
static int dediprog_shutdown(void *data)
{
dediprog_firmwareversion = FIRMWARE_VERSION(0, 0, 0);
dediprog_devicetype = DEV_UNKNOWN;
/* URB 28. Command Set SPI Voltage to 0. */
if (dediprog_set_spi_voltage(0x0))
@@ -849,7 +891,7 @@ int dediprog_init(void)
dev->descriptor.idVendor, dev->descriptor.idProduct);
dediprog_handle = usb_open(dev);
if (!dediprog_handle) {
msg_perr("Could not open USB device: %s\n", usb_strerror());
msg_perr("Could not find a Dediprog programmer on USB: %s\n", usb_strerror());
return 1;
}
ret = usb_set_configuration(dediprog_handle, 1);
@@ -868,7 +910,6 @@ int dediprog_init(void)
msg_perr("Could not close USB device!\n");
return 1;
}
dediprog_endpoint = 2;
if (register_shutdown(dediprog_shutdown, NULL))
return 1;
@@ -879,6 +920,13 @@ int dediprog_init(void)
if (dediprog_check_devicestring())
return 1;
/* SF100 only has 1 endpoint for in/out, SF600 uses two separate endpoints instead. */
dediprog_in_endpoint = 2;
if (dediprog_devicetype == DEV_SF100)
dediprog_out_endpoint = 2;
else
dediprog_out_endpoint = 1;
/* Set all possible LEDs as soon as possible to indicate activity.
* Because knowing the firmware version is required to set the LEDs correctly we need to this after
* dediprog_check_devicestring() has queried the device and set dediprog_firmwareversion. */
@@ -892,6 +940,9 @@ int dediprog_init(void)
return 1;
}
if (dediprog_standalone_mode())
return 1;
if (register_spi_master(&spi_master_dediprog) || dediprog_set_leds(LED_NONE))
return 1;