mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-27 23:22:37 +02:00
Add atapromise programmer
Supported controllers are Promise PDC20262 (FastTrak66/Ultra66), PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100). At least the Ultra100 only has address lines A0-A14 wired up, limiting addressable chip size to 32 kB. The flash chips mounted on those controllers usually is 128 kB, i.e. parts of the flash chip are inaccessible. As a workaround, the driver implicitly truncates the size of all flash chips to 32 kB. Works well for the factory installed flash. Do NOT use as a generic programmer for chips >32 kB. Corresponding to flashrom svn r1916. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
This commit is contained in:
Joseph C. Lehner
Carl-Daniel Hailfinger
parent
a3712817a2
commit
c2644a3fc1
14
Makefile
14
Makefile
@ -227,6 +227,11 @@ UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
|
||||
else
|
||||
override CONFIG_ATAVIA = no
|
||||
endif
|
||||
ifeq ($(CONFIG_ATAPROMISE), yes)
|
||||
UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
|
||||
else
|
||||
override CONFIG_ATAPROMISE = no
|
||||
endif
|
||||
ifeq ($(CONFIG_IT8212), yes)
|
||||
UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
|
||||
else
|
||||
@ -449,6 +454,9 @@ CONFIG_ATAHPT ?= no
|
||||
# VIA VT6421A LPC memory support
|
||||
CONFIG_ATAVIA ?= yes
|
||||
|
||||
# Promise ATA controller support.
|
||||
CONFIG_ATAPROMISE ?= no
|
||||
|
||||
# Always enable FT2232 SPI dongles for now.
|
||||
CONFIG_FT2232_SPI ?= yes
|
||||
|
||||
@ -626,6 +634,12 @@ PROGRAMMER_OBJS += atavia.o
|
||||
NEED_PCI := yes
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ATAPROMISE), yes)
|
||||
FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1'
|
||||
PROGRAMMER_OBJS += atapromise.o
|
||||
NEED_PCI := yes
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_IT8212), yes)
|
||||
FEATURE_CFLAGS += -D'CONFIG_IT8212=1'
|
||||
PROGRAMMER_OBJS += it8212.o
|
||||
|
||||
177
atapromise.c
Normal file
177
atapromise.c
Normal file
@ -0,0 +1,177 @@
|
||||
/*
|
||||
* This file is part of the flashrom project.
|
||||
*
|
||||
* Copyright (C) 2015 Joseph C. Lehner <joseph.c.lehner@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#if defined(__i386__) || defined(__x86_64__)
|
||||
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include "flash.h"
|
||||
#include "programmer.h"
|
||||
#include "hwaccess.h"
|
||||
|
||||
#define MAX_ROM_DECODE (32 * 1024)
|
||||
#define ADDR_MASK (MAX_ROM_DECODE - 1)
|
||||
|
||||
/*
|
||||
* In the absence of any public docs on the PDC2026x family, this programmer was created through a mix of
|
||||
* reverse-engineering and trial and error.
|
||||
*
|
||||
* The only device tested is an Ultra100 controller, but the logic for programming the other 2026x controllers
|
||||
* is the same, so it should, in theory, work for those as well.
|
||||
*
|
||||
* While the tested Ultra100 controller used a 128 kB MX29F001T chip, A16 and A15 showed continuity to ground,
|
||||
* thus limiting the the programmer on this card to 32 kB. Without other controllers to test this programmer on,
|
||||
* this is currently a hard limit. Note that ROM files for these controllers are 16 kB only.
|
||||
*
|
||||
* Since flashrom does not support accessing flash chips larger than the size limit of the programmer (the
|
||||
* tested Ultra100 uses a 128 kB MX29F001T chip), the chip size is hackishly adjusted in atapromise_limit_chip.
|
||||
*/
|
||||
|
||||
static uint32_t io_base_addr = 0;
|
||||
static uint32_t rom_base_addr = 0;
|
||||
|
||||
static uint8_t *atapromise_bar = NULL;
|
||||
static size_t rom_size = 0;
|
||||
|
||||
const struct dev_entry ata_promise[] = {
|
||||
{0x105a, 0x4d38, NT, "Promise", "PDC20262 (FastTrak66/Ultra66)"},
|
||||
{0x105a, 0x0d30, NT, "Promise", "PDC20265 (FastTrak100 Lite/Ultra100)"},
|
||||
{0x105a, 0x4d30, OK, "Promise", "PDC20267 (FastTrak100/Ultra100)"},
|
||||
{0},
|
||||
};
|
||||
|
||||
static void atapromise_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr);
|
||||
static uint8_t atapromise_chip_readb(const struct flashctx *flash, const chipaddr addr);
|
||||
|
||||
static const struct par_master par_master_atapromise = {
|
||||
.chip_readb = atapromise_chip_readb,
|
||||
.chip_readw = fallback_chip_readw,
|
||||
.chip_readl = fallback_chip_readl,
|
||||
.chip_readn = fallback_chip_readn,
|
||||
.chip_writeb = atapromise_chip_writeb,
|
||||
.chip_writew = fallback_chip_writew,
|
||||
.chip_writel = fallback_chip_writel,
|
||||
.chip_writen = fallback_chip_writen,
|
||||
};
|
||||
|
||||
void *atapromise_map(const char *descr, uintptr_t phys_addr, size_t len)
|
||||
{
|
||||
/* In case fallback_map ever returns something other than NULL. */
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static void atapromise_limit_chip(struct flashchip *chip)
|
||||
{
|
||||
static uint32_t last_model_id = 0;
|
||||
unsigned int i, size;
|
||||
|
||||
if (chip->model_id == last_model_id)
|
||||
return;
|
||||
|
||||
size = chip->total_size * 1024;
|
||||
if (size > rom_size) {
|
||||
/* Undefine all block_erasers that don't operate on the whole chip,
|
||||
* and adjust the eraseblock size of the one that does.
|
||||
*/
|
||||
for (i = 0; i < NUM_ERASEFUNCTIONS; ++i) {
|
||||
if (chip->block_erasers[i].eraseblocks[0].size != size) {
|
||||
chip->block_erasers[i].eraseblocks[0].count = 0;
|
||||
chip->block_erasers[i].block_erase = NULL;
|
||||
} else {
|
||||
chip->block_erasers[i].eraseblocks[0].size = rom_size;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (i != NUM_ERASEFUNCTIONS) {
|
||||
chip->total_size = rom_size / 1024;
|
||||
if (chip->page_size > rom_size)
|
||||
chip->page_size = rom_size;
|
||||
} else {
|
||||
msg_pdbg("Failed to adjust size of chip \"%s\" (%d kB).\n", chip->name,
|
||||
chip->total_size);
|
||||
}
|
||||
}
|
||||
|
||||
last_model_id = chip->model_id;
|
||||
}
|
||||
|
||||
int atapromise_init(void)
|
||||
{
|
||||
struct pci_dev *dev = NULL;
|
||||
|
||||
if (rget_io_perms())
|
||||
return 1;
|
||||
|
||||
dev = pcidev_init(ata_promise, PCI_BASE_ADDRESS_4);
|
||||
if (!dev)
|
||||
return 1;
|
||||
|
||||
io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_4) & 0xfffe;
|
||||
if (!io_base_addr) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Not exactly sure what this does, because flashing seems to work
|
||||
* well without it. However, PTIFLASH does it, so we do it too.
|
||||
*/
|
||||
OUTB(1, io_base_addr + 0x10);
|
||||
|
||||
rom_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_5);
|
||||
if (!rom_base_addr) {
|
||||
msg_pdbg("Failed to read BAR5\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
rom_size = dev->rom_size > MAX_ROM_DECODE ? MAX_ROM_DECODE : dev->rom_size;
|
||||
atapromise_bar = (uint8_t*)rphysmap("Promise", rom_base_addr, rom_size);
|
||||
if (atapromise_bar == ERROR_PTR) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
max_rom_decode.parallel = rom_size;
|
||||
register_par_master(&par_master_atapromise, BUS_PARALLEL);
|
||||
|
||||
msg_pwarn("Do not use this device as a generic programmer. It will leave anything outside\n"
|
||||
"the first %zu kB of the flash chip in an undefined state. It works fine for the\n"
|
||||
"purpose of updating the firmware of this device (padding may neccessary).\n",
|
||||
rom_size / 1024);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void atapromise_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr)
|
||||
{
|
||||
uint32_t data;
|
||||
|
||||
atapromise_limit_chip(flash->chip);
|
||||
data = (rom_base_addr + (addr & ADDR_MASK)) << 8 | val;
|
||||
OUTL(data, io_base_addr + 0x14);
|
||||
}
|
||||
|
||||
static uint8_t atapromise_chip_readb(const struct flashctx *flash, const chipaddr addr)
|
||||
{
|
||||
atapromise_limit_chip(flash->chip);
|
||||
return pci_mmio_readb(atapromise_bar + (addr & ADDR_MASK));
|
||||
}
|
||||
|
||||
#else
|
||||
#error PCI port I/O access is not supported on this architecture yet.
|
||||
#endif
|
||||
@ -233,6 +233,8 @@ cards)"
|
||||
.sp
|
||||
.BR "* atavia" " (for flash ROMs on VIA VT6421A SATA controllers)"
|
||||
.sp
|
||||
.BR "* atapromise" " (for flash ROMs on Promise PDC2026x ATA/RAID controllers)"
|
||||
.sp
|
||||
.BR "* it8212" " (for flash ROMs on ITE IT8212F ATA/RAID controller)"
|
||||
.sp
|
||||
.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family \
|
||||
@ -636,7 +638,7 @@ is an 8-bit hexadecimal value.
|
||||
.SS
|
||||
.BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\
|
||||
, " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\
|
||||
, " satamv" , " atahpt", " atavia " and " it8212 " programmers
|
||||
, " satamv" , " atahpt", " atavia ", " atapromise " and " it8212 " programmers
|
||||
.IP
|
||||
These programmers have an option to specify the PCI address of the card
|
||||
your want to use, which must be specified if more than one card supported
|
||||
@ -669,6 +671,13 @@ will be interpreted as usual (leading 0x (0) for hexadecimal (octal) values, or
|
||||
For more information please see
|
||||
.URLB https://flashrom.org/VT6421A "its wiki page" .
|
||||
.SS
|
||||
.BR "atapromise " programmer
|
||||
.IP
|
||||
This programmer is currently limited to 32 kB, regardless of the actual size of the flash chip. This stems
|
||||
from the fact that, on the tested device (a Promise Ultra100), not all of the chip's address lines were
|
||||
actually connected. You may use this programmer to flash firmware updates, since these are only 16 kB in
|
||||
size (padding to 32 kB is required).
|
||||
.SS
|
||||
.BR "nicintel_eeprom " programmer
|
||||
.IP
|
||||
This is the first programmer module in flashrom that does not provide access to NOR flash chips but EEPROMs
|
||||
@ -1059,8 +1068,8 @@ needs raw I/O port access.
|
||||
.BR satasii ", " nicintel ", " nicintel_eeprom " and " nicintel_spi
|
||||
need PCI configuration space read access and raw memory access.
|
||||
.sp
|
||||
.B satamv
|
||||
needs PCI configuration space read access, raw I/O port access and raw memory
|
||||
.BR satamv " and " atapromise
|
||||
need PCI configuration space read access, raw I/O port access and raw memory
|
||||
access.
|
||||
.sp
|
||||
.B serprog
|
||||
@ -1076,7 +1085,7 @@ need access to the USB device via libusb.
|
||||
needs no access permissions at all.
|
||||
.sp
|
||||
.BR internal ", " nic3com ", " nicrealtek ", " nicnatsemi ", "
|
||||
.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt" and " atavia
|
||||
.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt ", " atavia " and " atapromise
|
||||
have to be run as superuser/root, and need additional raw access permission.
|
||||
.sp
|
||||
.BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi ", " ft2232_spi " and " pickit2_spi
|
||||
|
||||
12
flashrom.c
12
flashrom.c
@ -182,6 +182,18 @@ const struct programmer_entry programmer_table[] = {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if CONFIG_ATAPROMISE == 1
|
||||
{
|
||||
.name = "atapromise",
|
||||
.type = PCI,
|
||||
.devs.dev = ata_promise,
|
||||
.init = atapromise_init,
|
||||
.map_flash_region = atapromise_map,
|
||||
.unmap_flash_region = fallback_unmap,
|
||||
.delay = internal_delay,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if CONFIG_IT8212 == 1
|
||||
{
|
||||
.name = "it8212",
|
||||
|
||||
10
programmer.h
10
programmer.h
@ -57,6 +57,9 @@ enum programmer {
|
||||
#if CONFIG_ATAVIA == 1
|
||||
PROGRAMMER_ATAVIA,
|
||||
#endif
|
||||
#if CONFIG_ATAPROMISE == 1
|
||||
PROGRAMMER_ATAPROMISE,
|
||||
#endif
|
||||
#if CONFIG_IT8212 == 1
|
||||
PROGRAMMER_IT8212,
|
||||
#endif
|
||||
@ -460,6 +463,13 @@ void *atavia_map(const char *descr, uintptr_t phys_addr, size_t len);
|
||||
extern const struct dev_entry ata_via[];
|
||||
#endif
|
||||
|
||||
/* atapromise.c */
|
||||
#if CONFIG_ATAPROMISE == 1
|
||||
int atapromise_init(void);
|
||||
void *atapromise_map(const char *descr, uintptr_t phys_addr, size_t len);
|
||||
extern const struct dev_entry ata_promise[];
|
||||
#endif
|
||||
|
||||
/* it8212.c */
|
||||
#if CONFIG_IT8212 == 1
|
||||
int it8212_init(void);
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user