Intel datasheet says "byte accesses only". Looks like they mean it.
Also fix use of or instead of and for lowering GPOs.
Corresponding to flashrom svn r910.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
We also need to 'svn rm' the following files:
am29f040b.c
en29f002a.c
m29f002.c
mx29f002.c
pm29f002.c
sst49lf040.c
w49f002u.c
Corresponding to flashrom svn r909.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
It's disabled by default. The current status is detailed at:
http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html
Corresponding to flashrom svn r908.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- Set supported buses based on ISA bridge reg 0x8a
- Use MCP55 chipset enable only if LPC is detected
- Allow LPC on MCP61
- Eliminate duplicated code where possible
Corresponding to flashrom svn r906.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Cast input to tolower() to unsigned char to work around how tolower() is
implemented on NetBSD.
Also, use CPPFLAGS (rather than overriding CFLAGS) for the
NetBSD/DragonFly build example.
Corresponding to flashrom svn r905.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Some programmers want to run certain functions during programmer
shutdown, but the function choice depends on the code path taken
during programmer init. Rather than rebuilding the whole init logic in
the shutdown function, it is now possible to register functions for
execution on programmer shutdown. The behaviour is similar to atexit(),
but the registered functions will be run on programmer shutdown instead
of on exit and the functions will be called with a void * argument
that is specified on registration. Registered functions must have
the prototype void function(void *); and will be executed in reverse
registration order directly before calling the programmer-specific
shutdown() function. It is recommended to have shutdown() only disable
programmer/hardware access and leave all code path sensitive shutdown to
functions registered with register_shutdown().
The most prominent use case is resetting the EC after flashing on
laptops.
Note: There are quite a few code paths in flashrom which proceed to
terminate flashrom without any programmer shutdown. Those code paths
will not get the benefit of register_shutdown() and they should be
changed wherever possible.
Corresponding to flashrom svn r904.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Corresponding to flashrom svn r903.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Huge thanks to Michael Karcher for reverse engineering the MCP67 chipset
and writing a spec. Due to this, we were able to use the chinese wall
technique for 100% clean room reverse engineering.
This patch doesn't touch any of the new registers, it only reads them.
Assuming that read has no side effects, this patch is a no-op and safe.
We need "flashrom -V" output from all post-MCP55 (nForce 5) chipset
boards. Please indicate if your board uses SPI flash or LPC flash (if
you know it). Note: That output is only helpful if it is created with
patched flashrom and if is from the first run of flashrom after a cold
boot (reset or Ctrl-Alt-Del is not sufficient). There is a pattern based
on which we can probably detect which flash type is present on the
board.
Thanks to Alessandro Polverini for testing earlier iterations of this
patch.
Note: The MCP67 should work. I guessed that the other recent Nvidia
chipsets would work in a similar way, and created a simplified
do-nothing catchall chipset enable function which dumps some info and
instructs the user to send more info.
Corresponding to flashrom svn r902.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Corresponding to flashrom svn r900.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
SPI RES is the most unreliable way to identify chips because it only
returns a 1-byte ID for most chips.
For every given ID out there, probably a dozen incompatible flash
chips match it. We already refuse to identify a chip with RES if that
chip responds to RDID (3 bytes, good match), and with this patch we
additionally refuse RES if the chip responds to REMS (2 bytes, still a
good match). This increases matching accuracy a lot.
Besides that, the RDID/REMS response checking has been cleaned up for
better readability.
Corresponding to flashrom svn r899.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Linking in support for the internal programmer doesn't make sense if you
only need hardware (ioport, memory) access.
Note: This patch was created by "svn cp internal.c hwaccess.c" and then
removing stuff from both files. That's why you can't apply the patch
as-is before running the svn cp.
Corresponding to flashrom svn r898.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
The Winbond W25X10 and related chips only have 4k and 64k blocks and
only accept erase commands: 20h, d8h, and c7h.
Corresponding to flashrom svn r897.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: David Hendricks <dhendrix@google.com>
This bug slipped in on changing back match-specific to match-any
Corresponding to flashrom svn r896.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Back in November 2008(!) I proposed the first version of the flexible
sector-based erase structure, and now we can finally rip out the old
full-chip erase code without ill effects. Rejoice and party!
Thanks to everyone who made this possible, especially to Sean Nelson who
converted the majority of flash chips to sector erase.
Corresponding to flashrom svn r895.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This megapatch rewrites substantial parts of ICH SPI to actually do
what the SPI layer wants instead of its own weird idea about commands
(running unrequested commands, running modified commands). Besides that,
there is a fair share of cleanups as well.
- Add JEDEC_EWSR (Enable Write Status Register) to default commands. -
Mark a no longer used opcode/preopcode table as unused. - Declare all
commands as non-atomic/standalone by default. The ICH SPI driver has
no business executing commands (preopcodes) automatically if they were
not requested. - Automatically adjust preopcode/opcode pairings (like
WREN+ERASE) based on what the SPI layer requested. The ICH SPI driver
has no business executing altered opcode pairs as it sees fit. - Fix
incomplete initialization in the case of a locked down chipset. Leaving
the first 4 opcodes with uninitialized pairings had unpredictable
results. - switch() exists for a reason. Nested if() checking on the
same variable is an interesting style. - Actually check if the requested
readcnt/writecnt for a command is supported by the hardware instead
of delivering corrupt/incomplete commands and data. - If a command
has unsupported readlen/writelen, complain loudly to the user. - Use
find_opcode instead of open-coding the same stuff in a dozen variations.
- Introduce infrastructure for updating the command set of unlocked
chipsets on the fly.
Corresponding to flashrom svn r894.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
The rules may change in the future, but right now it is important that
the comments match the code.
Corresponding to flashrom svn r893.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This is needed for the Intel SE440BX-2 as well as the Asus P5A.
Corresponding to flashrom svn r892.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
That's necessary to use bulk transfers, and just the
right thing in any case.
Corresponding to flashrom svn r891.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
(Re-)tested on hardware, detection works OK.
Corresponding to flashrom svn r890.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This should take care of picky Linux kernels which do not allow uncached
mappings to cached areas. Handle mapping failure gracefully (no forced
exit()) if the caller specifies it.
Such cached areas which can handle mapping failure are DMI tables and
coreboot tables. On failure we just ignore those tables. That is not
perfect, but a lot better than aborting flashrom due to an error in
nonessential functionality.
This should fix flashrom on a sizable number of machines where it
currently aborts early.
Yes, I could have exploited a Linux kernel bug to "solve" this, but
relying on such bugs is not exactly the best idea.
Corresponding to flashrom svn r889.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Vincent Pelletier <plr.vincent@gmail.com>
Tested and works for me.
Corresponding to flashrom svn r888.
Signed-off-by: Jeffrey A. Kent <jakent@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
The board doesn't need a board-enable, writing works out of the box.
Also, the board can only decode 256KB. I verified this by writing a 512KB
image of random bytes (which fails), whereas 256KB of random bytes can be
written correctly.
Corresponding to flashrom svn r887.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add FEATURE_SHORT_RESET, FEATURE_LONG_RESET, and FEATURE_EITHER_RESET
rewrite jedec functions to use getaddrmask
convert write_49f002 to write_jedec_1
convert write_w39v040c to write_jedec_1
convert probe_w39v040c to probe_jedec
convert write_49lf040 to write_jedec_1
convert write_pm29f002 to write_jedec
convert write_29f040b to write_jedec_1
convert probe_29f040b to probe_jedec
convert erase_chip_29f040b to erase_chip_block_jedec
convert erase_sector_29f040b to erase_sector_jedec
convert write_m29f002b to write_jedec
convert write_m29f002t to write_jedec
convert *_29f002 to *_jedec
decouple unused files from Makefile:
am29f040b.c
en29f002a.c
m29f002.c
mx29f002.c
pm29f002.c
sst49lf040.c
w39v040c.c
w49f002u.c
Corresponding to flashrom svn r886.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
Add this information to the new field in the board-enable table. We match the
board via two sets of PCI IDs. However, as we don't need a board-enable
function for this board (it works out of the box; well, at least if you remove
the JP9 jumper on the board), change the code to allow NULL as value for
the board-enable function. There will likely be more boards in the future where
we want to record a maximum decode size but which don't need a board-enable.
This is hardware-tested on the GIGABYTE GA-7ZM by successfully writing a 512KB
image of random bytes to a chip in this board.
Corresponding to flashrom svn r885.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Recent gcc/glibc combinations warn about ignoring the fgets() result.
The problem exists on Ubuntu 9.10 with current updates. This "fix" of
the non-problem (as I check ferror() afterwards) should even be a
(negligible) performance optimization.
Corresponding to flashrom svn r884.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
As UNC also works for smaller names, just retarget all requests for
dev=COMx on win32 to \\.\COMx. Tested with large and small COM port
numbers on XP.
Corresponding to flashrom svn r883.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No change on UNIX (or Mac OS, according to its documentation), but fixes
operation on Windows.
Corresponding to flashrom svn r882.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
All operations tested by me, works fine.
Corresponding to flashrom svn r881.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Speed up reads by a factor of 4 by switching block size from 4 to 16.
Add support for 4 byte RDID.
Add USB error decoding via usb_strerror.
Corresponding to flashrom svn r879.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Convert the following chips to block_erasers: SST28SF040A SST29EE010
SST29LE010 SST29EE020A SST29LE020 SST39SF010A SST39SF020A SST39SF040
SST39VF512 SST39VF010 SST39VF020 SST39VF040 SST39VF080 SST49LF002A/B
SST49LF003A/B SST49LF004C SST49LF008A SST49LF008C SST49LF016C SST49LF020
SST49LF020A SST49LF040 SST49LF040B SST49LF080A SST49LF160C .
Extend sst28sf040 to include chip and sector functions for block_eraser.
Extend sst49lfxxxc to include chip, sector, block erasers functions for
block_erasers. Extend sst_fwhub to include chip and sector functions for
block_erasers. Add copyrights to changed files. Killed erase_sst_fwhub.
Killed erase_49lfxxxc. NULL A/A mux mode full chip erasers. Ignore block
locks in erase/write. Change comments from "PP mode" to "A/A mux mode"
Corresponding to flashrom svn r877.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Should be functionally the same as it8705f_write_enable_2e.
Corresponding to flashrom svn r876.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This is a quick fix for board specific parallel addressing limits.
Corresponding to flashrom svn r875.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Sean Nelson <audiohacked@gmail.com>
If a board is not uniquely identifiable by PCI device/subsystem IDs, a
string can be specified to be looked for (case-sensitive, substring or
anchored) for now in one of the following DMI items in addition to matching
the PCI IDs:
- System Manufacturer
- System Product Name
- System Version
- Baseboard Manufacturer
- Baseboard Product Name
- Baseboard Version
Strings are anchored re-like (^ at the beginning, $ at the end), but
there are no plans to support full regular expressions and matched to any
of the mentioned fields.
The match is only made if DMI info is available and the string matches.
If no DMI info is available and the PCI IDs match, a warning is printed
as the board can not be autodetected.
It's still open to discussion whether we add an DMI override switch to
specify a string that will definitely match, and whether this switch is
only used if no DMI is available or whether it overrides or augments DMI
data.
DMI data is currently read using dmidecode. This tool is available for
all major platforms except MacOS X. I heard that there also is a MacOS X
version of dmidecode, but didn't investigate that.
Corresponding to flashrom svn r874.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
ST M25P05-A
ST M25P05.RES
ST M25P10-A
ST M25P10.RES
ST M25P20
ST M25P40
ST M25P40-old
ST M25P80
ST M25P16
ST M25P32
ST M25P64
ST M25P128
ST M29F002B
ST M29F002T/NT
ST M29F040B
ST M29F400BT
ST M29W010B
ST M29W040B
ST M50FLW040A
ST M50FLW040B
ST M50FLW080A
ST M50FLW080B
ST M50FW002
ST M50FW016
ST M50FW040
ST M50FW080
ST M50LPW116
Add erase_chip_stm50flw0x0x to stm50flw0x0x.c
Add copyright to stm50flw0x0x.c
Fix block sizes and counts
Omit M50FLW0x0x mixed sector/block eraser
Convert the used 82802ab functions to their stm50flw0x0x equivalents
Fix incorrect sizes as found by Carl-Daniel.
Add back M50FLW0x0x mixed sector/block eraser sans function pointer.
Corresponding to flashrom svn r872.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Convert chips to block_erasers:
SyncMOS S29C31004T
SyncMOS S29C51001T
SyncMOS S29C51002T
SyncMOS S29C51004T
TI TMS29F002RT
TI TMS29F002RB
SyncMOS chips have Uniform sector; boot blocks on chips are made up of uniform sectors but have locking.
Corresponding to flashrom svn r871.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Reverse engineered from USB logs. I never touched that programmer nor
did I ever see the associated software.
Disabled by default until it is complete. The driver needs to be hooked
up to the SPI core before it will do anything besides init and
diagnostics.
I successfully reverse engineered all commands, but some are still
somewhat magic.
Logs from "flashrom -p dediprog -V" are appreciated.
Probe and read should work, erase/write is expected to explode.
The programmer will set voltage to 0 on exit.
Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB
logs and for testing the result.
Corresponding to flashrom svn r870.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
It doesn't make sense to have different layouts for the same function
on one chip. Keep going if an error is found, we want all errors to be
reported in one fell swoop.
Corresponding to flashrom svn r869.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Public chipset documentation available at
http://www.intel.com/Assets/PDF/datasheet/322896.pdf
Tested on NM10-based customer reference board from Intel.
Corresponding to flashrom svn r866.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r865.
Thanks to hailfinger's self-check-erase routine for catching this.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Flashrom performs a self-check on every startup before it even starts to
initialize any programmer.
That way, compiler errors and code errors will be caught before they can
do any harm. This patch adds an eraseblock structure self-check. It also
modifies the self-check code to consistently run all checks even if one
check failed.
Corresponding to flashrom svn r864.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Thanks to Michael Karcher for noticing.
Corresponding to flashrom svn r863.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested with read/erase/write (including verify). I only wrote the image
that was read before - don't want to brick my laptop.
Corresponding to flashrom svn r862.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Some mingw declares a global identifier "byte", causing -Werror -Wshadow
to break compilation. This patch renames all identifiers called "byte".
Corresponding to flashrom svn r861.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
