Add an option --ifd to read the ROM layout from an Intel Firmware
Descriptor (IFD). Works the same as the -l option, if given, -i
specifies the images to update.
v2: o Rebased on libflashrom, use libflashrom interface.
o Use functions from ich_descriptors.c.
v3: o Move ich_descriptors.o to LIB_OBJS, thus build it independent
of arch and programmers.
o Bail out if we aren't compiled for little endian.
o Update flashrom.8.tmpl.
v4: o Incorporated David's comments.
o Removed single-character `-d` option.
v5: Changed region names to match the output of `ifdtool --layout ...`
Change-Id: Ifafff2bf6d5c5e62283416b3269723f81fdc0fa3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I didn't really know what I was doing and hope removing the #ifdefs
doesn't have negative side effects.
The idea is to make the functions generally available for external
flashing (e.g. you might want to flash an Intel machine using an ARM
device as programmer).
Beware of big endian trouble, I guess. :-P
Change-Id: Ib3d38a622a581afee87b49777e775942cc901fc8
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This option specifies to verify included regions only after a write.
It also reduces the data read before the write.
v2: o Changed short option name to `-N`.
o Added section in the manual page.
Change-Id: I40b5983f56d62821d17b827b88b73d1d41a30bd7
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Only difference to its sibling W25Q128.V seems to be the supply voltage.
Change-Id: I34ce7f1bdd0d2fb1b065031e5a689bb16ffc70db
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This renames CLI's print() to flashrom_print_cb() and registers it
through the new libflashrom interface.
v2: Add libflashrom.o to LIB_OBJS now that everything can be linked
together.
Change-Id: Idf19978eb8e340d258199193d2978f37409e9983
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reference documentation for libflashrom can be build with doxygen. With
doxygen Doxyfile
documentation will be put into a libflashrom-doc/ subdirectory.
v2: o Updated Doxyfile with `doxygen -u Doxyfile`.
o Added flashrom.c to the INPUT list.
Change-Id: I583bf9aa8c43049723aff498625d490c37832f13
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This adds a minimal libflashrom interface based on the draft in the
wiki. While the glue code in libflashrom.c is build on top of the
existing code instead on overhauling it, the interface in libflashrom.h
is supposed to be stable. So we can keep the interface and adapt
internals later if favoured, without breaking clients.
A new make target, libinstall, is also added. It installs libflashrom.a
and libflashrom.h in lib/ and include/ dirs respectively.
Hooking this into the build would break linking of the CLI and is post-
poned until that got fixed.
v2: Rebase and fixes by Anton Kochkov.
v3: o fl_image_*() rewritten with layout support (touch only included regions).
o Moved read/erase/write/verify operations to flashrom.c.
o Added layout pointer and flags to the flash context.
v4: Removed libflashrom.o from LIB_OBJS until CLI is adapted.
v5: o Incorporated David's comments.
o Added `fl_flashprog_t` as dummy parameter to hide the fact that
we have global state all around, and for future-proofness ofc.
v6: o Change namespace prefix to flashrom_.
o Remove typedefs.
Change-Id: I00f169990830aa17b7dfae5eb74010d40c476181
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Inspired by Lynxis' related work, this implements a foundation for
layout based flash access.
All operations iterate over the given layout regions. Erase and write
then walk, per region, over all erase blocks in an inner loop (which
might not be what we want, see note on optimization below). Special care
has been taken that flash content is merged properly, in case an erase
block is only partially covered by a layout region or even affects mul-
tiple regions.
A note on performance: In the case an erase block affects multiple
regions, it will probably be read, erased and written for each region.
Another approach would be to walk all erase blocks once and check for
each erase block which regions it touches (i.e. for each erase block,
merge data pontentially from the flash and all layout regions, then
flash the combined data). That might result in cleaner code. I haven't
tried it yet, though.
Change-Id: Ic6194cea4c4c430e0cf9d586052508a865b09c86
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Introduce `struct flashrom_layout` and refactor layout.c a little, so
we can reuse the layout from there and have other sources of layouts
beside it.
I didn't want to clutter up flash.h any more. So things went into a new
layout.h.
Change-Id: Icea1a58c283131cc9c5fde6f16d783538dc1a4c7
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Per clang-3.9, the compiler fails on #define ...defined(...) statements
as they're undefined behavior (apparently with different behavior
between gcc/clang and msvc, too).
See clang's cfe repo commit r258128 for details.
Change-Id: I82b6235e11b425fae45eebbe06b08f81c5bdbb98
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18792
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GCS was decoded partly inside, partly outside this function. The
decoding of `top_swap` was off, since passing a `uint8_t` as `bool`
doesn't magically check bit0 only.
While we are at it, rename this void function to enable_flash_ich_
report_gcs() as it's not doing anything. Beside debug output it
doesn't have any side effects.
Change-Id: I40addec98cb6840763adad30f9d0e27dadce6d1e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18882
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
We didn't check the total number of queued transfers in the inner most
loop. Up to DEDIPROG_ASYNC_TRANSFERS - 1 invalid transfers could be
queued therefore. So add another check on the total number.
Change-Id: I91a8de47db7107455f5fc63ab2f13a0bd50c5b63
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/19351
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
When running coreboot everything works, while on vendor bios it fails
to erase anything until the 3th erase function of a SST25VF016B is
tried.
Change-Id: I5e4daaa67f98a47e237cd73962776da369c8f0b5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18943
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
An internal security audit of the flashrom project by
Carl-Daniel Hailfinger found a buffer overflow bug present in all
flashrom versions since the year 2005.
This bug was independently found and reported to flashrom.org by
Cosmin Gorgovan a few days ago.
A buffer on the stack and a buffer on the heap are affected by the
overflow caused by an incorrect fscanf format string.
The buffer overflow can only be triggered if the optional layout feature
is used and if the user manually specifies a specially crafted layout
file on the command line. Command line parsing and flash image handling
do not trigger the buggy code path.
Most usage of flashrom does not involve layout files.
The fix in this commit (changed fscanf format string) can be applied to
layout.c of all past flashrom versions.
Corresponding to flashrom svn r1953.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Implement serial port shutdown both for regular termination and error
conditions in pony_spi.
Corresponding to flashrom svn r1952.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- ASRock Fatal1ty 970 Performance and P4i65G
Reported by anonymous email message ID:
932677687262b1300eaf14260999d9262c31@guerrillamail.com
The latter actually had a tested board enable already.
Flash chips:
- Eon EN25Q128 to PREW (+PREW)
Reported by Adrian Graham
- GigaDevice GD25VQ41B to PREW (+PREW)
Reported by David Hendricks
- Winbond W39V040FB to PREW (+EW)
Reported by fjed on IRC
Miscellaneous:
- Change PCI IDs of "MS-6577 (Xenon)" board enable.
The previous IDs contained the on-board display adapter which is
disabled when a dedicated graphics card is installed.
- Add a note to the README how to overcome the clang warning if only a
single programmer is enabled.
- Fix some typo and manpage problems found by lintian
- r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
This patch corrects that.
- Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
Previous PCI IDs were board-specific but ot the other of devices
that could be disabled by the firmware or that vary among
hardware revions. There are no good alternatives available.
However, since we always have a DMI decoder available now, we can
use non-board-specific devices without taking risks. Thanks to
Uwe Hermann for reporting and testing.
- Some other small changes to clean up whitespace and fix some warnings
from Debian's lintian.
Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This came up when I was testing if building on SunOS still works
on the buildbot's instance of OmniOS r151014 which is based on illumos.
The fix is
- to link against libnsl
- a small C type fix in ich_descriptor_tool
Corresponding to flashrom svn r1950.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Specifying spispeed=reserved as programmer parameter resulted in
selecting the default SPI speed instead of aborting. Rewrite the logic
to be more readable.
Corresponding to flashrom svn r1949.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Allow mstarddc_spi and pony_spi on Android.
Allow mstarddc_spi and pony_spi on architectures with unsupported raw
access.
Corresponding to flashrom svn r1946.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Apparently, there is at least one board of Russian origin (coined
SPI_TT LPT) that works with SPI Tiny Tools which is a closed-source
Windows GUI program somewhat similar to flashrom.
Corresponding to flashrom svn r1945.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All credit for this should be given to Patrick Georgi (see r1869).
Corresponding to flashrom svn r1944.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Only hardware not needing raw access (PCI, memory, port I/O) is supported.
Corresponding to flashrom svn r1943.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Even though there is currently only one USB device ID in the wild using our
standard way to define the devices creates nicer output for -L and -z.
Corresponding to flashrom svn r1942.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Even though there is currently only one USB device ID in the wild using our
standard way to define the devices creates nicer output for -L and -z.
Corresponding to flashrom svn r1941.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The atapromise module uses the rom_size field of the struct pci_dev found
in pci.h that does not exist in libpayload's implementation and thus does
not compile with libpayload.
Corresponding to flashrom svn r1938.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is especially helpful for compile tests with CONFIG_EVERYTHING=yes,
but can also be used without CONFIG_EVERYTHING.
Usage:
make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no
CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no
Corresponding to flashrom svn r1936.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We do not support PCI port I/O on non-x86 (yet).
Atapromise needs PCI port I/O.
Corresponding to flashrom svn r1935.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
CONFIG_RAYER_SPI only needs raw hardware access, but not libpci.
Disable CONFIG_RAYER_SPI on Android because of missing inb/outb.
Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O
and MSR access.
Corresponding to flashrom svn r1934.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The solution was discovered in a collaborative bug hunt with testing done by
David Hendricks. The actual culprit was found by Urja Rannikko by comparing
vanilla flashrom with David's version in chromiumos.
Corresponding to flashrom svn r1933.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: David Hendricks <dhendrix@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This won't make raw I/O work magically but at least it would provide iopl()
if some driver requires it and there is no better alternative currently.
Corresponding to flashrom svn r1932.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Command line arguments given when executing make should not stop us
from setting commonly user-configurable variables like CPPFLAGS or
LDFLAGS.
Without this patch 'make CPPFLAGS="-Ifail"' would fail to find
libusb1 headers and abort.
Add override statements where we append mandatory options to
these variables to make (Debian) packagers more happy.
Also, r1920 introduced some explicit calls to pkg-config instead of
$(PKG_CONFIG). This patch corrects that as well.
Corresponding to flashrom svn r1931.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The current code is checking model_id to remember if a chip has already
been limited, but if flashchips.c contains two subsequent chips with
different vendor_id but identical model_id the adjustment will not be
done. Switch to checking the chip size instead.
If a chip has multiple whole-chip erase functions, only one will be
modified. Fix that.
Corresponding to flashrom svn r1930.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Acked-by: Urja Rannikko <urjaman@gmail.com>
This patch is based on Nico Huber's original version that was rebased
by David Hendricks for Chromium OS in
Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23
Corresponding to flashrom svn r1929.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
As per e-mail with Dediprog, command 0x0B (which is not listed in the
command spec) is need on older Dediprogs only. SF100 with firmware
V6.0.0 and newer as well as all SF600 programmers do not support it.
The original wording by Dediprog was: "0x0B is used to adjust voltage
level, but it's available for some version of SF100 only. SF100 of
firmware V6.x.x and all version of SF600/SF600Plus not support this
command. If you have old version of SF100, 0x0B is still needed."
This patch renames dediprog_device_init() to something more
appropriate and adds comments for clarity, and only runs it
conditionally if we cannot query the devicestring initially.
Based on ChromiumOS'
Change-Id: I42de7d28401d7ad5be8fcf8a8c165e2614a45960
Corresponding to flashrom svn r1928.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch is based on a number of changes by David Woodhouse and
David Hendricks.
SF600 uses two bulk endpoints, 1 for out and 2 for in unlike the
SF100 that uses only a single one. This patch make endpoint usage
more explicit and sets the in/out endpoint(s) appropriately for
SF100 and SF600.
Also, change all SF100-specific strings in messages and
leave standalone mode on SF600s.
Corresponding to flashrom svn r1927.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
If libpci, libusb0 or libusb1 are missing, make will now tell you which
currently enabled features require those libraries.
Example output:
Checking for libusb-0.1/libusb-compat headers... not found.
The following features require libusb-0.1/libusb-compat:
CONFIG_PICKIT2_SPI CONFIG_DEDIPROG.
Please install libusb-0.1 headers or libusb-compat headers.
See README for more information.
Corresponding to flashrom svn r1926.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.
Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808
Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.
Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:
- The clock divisor is set to '6', as this creates a 10MHz SPI clock,
which is the same SPI clock that the chromiumos branch produced.
- Add udev rule for Google servo boards to util/flashrom.rules.
- Add Google servo entry to manpage.
Corresponding to flashrom svn r1925.
Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Hatim Kanchwala <hatim@hatimak.me>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Hatim Kanchwala <hatim@hatimak.me>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
