Mostly by changing to `unsigned` types where applicable, sometimes
`signed` types, and casting as a last resort.
Change-Id: I08895543ffb7a48058bcf91ef6500ca113f2d305
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/30409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
It's almost identical to 100 series PCHs and later. There are some
additional FREGs (12..15). To not clutter the `if` conditions further,
make more use of `switch` statements.
Tested on Kontron mAL10. Mark it as DEP as usually the last sector
is not covered by the descriptor layout and can't be read.
Change-Id: I1c464b5b3d151e6d28d5db96495fe874a0a45718
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/30995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Not needed anymore. Drop it fast before it encourages anyone to
violate layers again!
Change-Id: I8eda93b429e3ebaef79e22aba76be62987e496f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/33651
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We used to bail out on any unknown laptop. However, modern systems with
SPI flashes don't suffer from the original problem. Even if a flash chip
is shared with the EC, the latter has to expect the host to send regular
JEDEC SPI commands any time.
So instead of bailing out, we limit the set of buses to probe. If we
suspect to be running on a laptop, we only allow probing of SPI and
opaque programmers. The user can still use the existing force options
to probe all buses.
This will obsolete some board-enables that could be moved to `print.c`
in follow-up commits.
Change-Id: I1dbda8cf0c10d7786106f14f0d18c3dcce35f0a3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/28716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Thomas Heijligen <src@posteo.de>
GCC is picky about the comment being where the break should go.
Change-Id: I05db2fb34025fefe2c6ddd1274c8e45b7cc5a4b6
Signed-off-by: Richard Hughes <richard@hughsie.com>
Reviewed-on: https://review.coreboot.org/c/30406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Replace the `ich_spi_force` logic with more helpful warnings. These can
be hidden later, in case the necessary switches are detected. Also,
demote some warnings about settings that are the default nowadays (e.g.
SPI configuration lock, inaccessible ME region).
Change-Id: I94a5e7074b845c227e43d76d04dd1a71082a1cef
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/26261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Get rid of the layering violations around ICH's BBAR. Move all the weird
address handling into (surprise, surprise) `ichspi.c`. Might fix writes
for the `BBAR != 0` case by accident.
Background: Some ICHs have a BBAR (BIOS Base Address Configuration
Register) that, if set, limits the valid address range to [BBAR, 2^24).
Current code lifted addresses for REMS, RES and READ operations by BBAR,
now we do it for all addresses in ichspi. Special care has to be taken
if the BBAR is not aligned by the flash chip's size. In this case, the
lower part of the chip (from BBAR aligned down, up to BBAR) is inacces-
sible (this seems to be the original intend behind BBAR) and has to be
left out in the address offset calculation.
Change-Id: Icbac513c5339e8aff624870252133284ef85ab73
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22396
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Skylake is a mess, especially with coreboot. We have now a present and
configured software sequencing interface with SCGO supposedly being
readonly (Apollo Lake has that feature and a strap documented, Skylake
behaviour might be the same). As we can't easily check if it's read-
only, just enable hardware sequencing by default (even if the software
sequencing interface seems usable).
Change-Id: I8a13fb9c3ca679b3f7d39ad1dc56d5efdc80045b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/22274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Two occurences of ICH9_REG_OPMENU were overlooked and not replaced,
rendering the software sequencing unusable on Skylake.
Change-Id: I16eebcf37ab8ba39b02f33135535552e380b0b92
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/22273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This adds PCI IDs for C620-series PCHs and adds
CHIPSET_C620_SERIES_LEWISBURG as a new entry in the ich_chipset enum.
Lewisburg is very similar to Sunrise Point for Flashrom's purposes,
however one important difference is the way the "number of masters" is
interpreted from the flash descriptor (0-based vs. 1-based). There are
also new flash regions defined.
Change-Id: I96c89bc28bdfcd953229c17679f2c28f8b874d0b
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/20922
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Can't find bits that tell us the actual permissions in charge. So report
them as unknown.
Change-Id: Ib73f95e0348f5c6d89988e3ea3529af0ec3b23a6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/21106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
The condition `base > limit` is still valid since `base` is always at
least 4096 greater than `limit` in this case.
Change-Id: I11ac0a50b3f32f47879e7cfb7a26068cd0572ede
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19046
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Sunrise Point PCH, paired with Skylake, has some minor changes
in the HW sequencing interface:
* Support for more flash regions moved PR* registers
* Only 4KiB erase blocks are supported by the primary erase command
* A second erase command for 64KiB pages was added
* More commands were added for status register access etc.
* A "Dedicated Lock Bits" register was added
No support for the new commands was added.
The SW sequencing interface seems to have moved register location and
is not supported any more officially. It's also untested.
Changes are loosely based on the Skylake support commit in Chromium OS
by Ramya Vijaykumar:
commit a9a64f9e4d52c39fcd3c5f7d7b88065baed189b1
Author: Ramya Vijaykumar <ramya.vijaykumar@intel.com>
flashrom: Add Skylake platform support
Change-Id: I0f4565a3c39f5fe3aec4fc8863605cebed1ad4ee
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
It's never used and has no clear contract (e.g. will the pointer stay
valid beyond the call?).
Change-Id: I0d4e7cc731364e86eff214b9022b842a577f9ef4
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Also, add a target to the makefile to build a flashrom.8.html with groff.
To fix some formatting issues this adds some indention commands as well.
Corresponding to flashrom svn r1913.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested mainboards:
OK:
- AOpen UK79G-1394 (used in EZ18 barebones)
Reported by Lawrence Gough
- ASUS M4N78 SE
Reported by Dima Veselov
- ASUS P5LD2-VM
Mark board enable as tested (reported by Dima Veselov)
- GIGABYTE GA-970A-UD3P (rev. 2.0)
Reported by trucmar on IRC
- GIGABYTE GA-990FXA-UD3 (rev. 4.0)
Reported by ROKO__ on IRC
- GIGABYTE GA-H77-DS3H (rev. 1.1)
Reported by Evgeniy Edigarev
- GIGABYTE GA-P55-USB3 (rev. 2.0)
Reported by Måns Thörnqvist
- MSI MS-7817 (H81M-E33)
Reported by Igor Kolker
Chipsets:
- Marked Intel Bay Trail (0x0f1c) as tested OK
Reported by Antonio Ospite
- Refine Intel IDs
* Add IDs for Braswell
* Add IDs for 9 Series PCHs (e.g. H97, Z97)
* Rename Wellsburg devices slightly
Flash chips:
- Atmel AT25DF041A to PREW (+PREW)
Reported by Tai-hwa Liang
- Atmel AT26DF161 to PREW (+EW)
Reported by Steve Shenton
- Atmel AT45DB011D to PREW (+PREW)
Reported by The Raven
- Atmel AT45DB642D to PREW (+PREW)
Reported by Mahesh Mokal
- Eon EN25F32 to PREW (+PREW)
Reported by Arman Khodabande
- Eon EN25F40 to PREW (+REW)
Reported by Jerrad Pierce
- Eon EN25QH16 to PREW (+EW)
Reported by Ben Johnson
- GigaDevice GD25Q20(B) to PREW (+PREW)
Reported by Gilles Aurejac
- Macronix MX25U6435E/F to PR (+PR)
Reported by Matt Taggart
- PMC Pm25LV512(A) to PREW (+PREW)
Reported by The Raven
- SST SST39VF020 to PREW (+PREW)
Reported by Urja Rannikko
- Winbond W25Q40.V to PREW (+EW)
Reported by Torben Nielsen
- Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E).
- Add MX25L6465E variant.
- There was never a MX25L12805 AFAICT.
- Split MX25L12805 from models with the same ID but an additional 32 kB
eraser: MX25L12835F/MX25L12845E/MX25L12865E.
- Add a bunch of ST parallel NOR flash chip IDs.
Miscellaneous:
- Whitelist ThinkPad X200.
- Constify master parameter of register_master().
- Remove FEATURE_BYTEWRITES because it was never used at all.
- Refine hwseq messages and make them less prominent.
- Fix the yet unused PRIxCHIPADDR format string thingy.
- Fix copy&paste error in spi_prettyprint_status_register_bp().
Spotted by Pablo Cases.
- Add an additional SMBus controller revision to identify another Yangtze
model. Thanks to Dan Christensen for reporting this issue.
- dediprog: add missing include for stdlib.h.
This fixes (at least) building on FreeBSD and DragonflyBSD with gcc.
- Remove references to struct pci_filter from programmer.h.
It is only needed in internal.c where it has a complete type. Having
it in programmer.h provokes a warning by some old versions of gcc.
- Tiny other stuff.
Corresponding to flashrom svn r1879.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The core of this patch to support Bay Trail originally came from the
Chromiumos flashrom repo and was modified by Sage to support the
Rangeley/Avoton parts as well.
Because that was not complicated enough already Stefan Tauner refactored
and refined everything. Bay Trail seems to be the first Atom SoC able to
support hwseq. No SPI Programming Guide could be obtained so it is
handled similarly to Lynx Point which seems to be its nearest relative.
Corresponding to flashrom svn r1844.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Marc Jones <marcj303@gmail.com>
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Thomas Reardon <thomas_reardon@hotmail.com>
Tested-by: Wen Wang <wen.wang@adiengineering.com>
Acked-by: Marc Jones <marcj303@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Possible values as well as encodings have changed in newer chipsets as follows.
- Pre-PCH (i.e. ICH) chipsets had a maximum frequency of 33 MHz for all
operations
- Since Cougar Point the chipsets support dual output fast reads (encoded
in bit 30).
- Flash component density encoding has changed from 3 to 4 bits with Lynx
Point, currently allowing for up to 64 MB chips.
Corresponding to flashrom svn r1843.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Apparently the erase function did never set any address before issuing the
erase commands. How could this ever work?
Also, according to PCH documentation crossing 256 byte boundaries is invalid
and may cause wraparound due to the flash chip's pages. Check for this on
reads as well as writes.
Thanks to Vladimir 'φ-coder/phcoder' Serbinenko for noticing these issues
and providing the initial patch.
Corresponding to flashrom svn r1837.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1789.
Inspired by and mostly based on a patch
Signed-off-by: Mark Marshall <mark.marshall@omicron.at>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Combine enable_flash_ich_4e() and enable_flash_ich_dc() to
enable_flash_ich_fwh().
- Remove unjustified (chipset) name parameters from various
enable_flash_ich* functions.
- Make Poulsbo and Tunnel Creek use generic enables by refining existing
functions to work with them, including everything in ichspi.c.
- Refactor enable_flash_ich_fwh_decode() to be called unconditionally for
all chipsets.
- Add support for Intel Atom Centerton (S12x0).
- Recombine ICH2/3/4/5 to CHIPSET_ICH2345 because we treat them equally
anyway.
- Move spibar handling out of ich_init_spi() into enable_flash_ich_spi()
- Various small cleanups.
Corresponding to flashrom svn r1761.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similarly to the previous PCI self-clean up patch this one allows to get rid
of a huge number of programmer shutdown functions and makes introducing
bugs harder. It adds a new function rphysmap() that takes care of unmapping
at shutdown. Callers are changed where it makes sense.
Corresponding to flashrom svn r1714.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
There is no good reason to collect further log files of locked Intel-
based boards. Forward affected users directly to an explanation in
the wiki instead.
Corresponding to flashrom svn r1675.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Thanks to Idwer and clang for noticing these problems.
Corresponding to flashrom svn r1646.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Some vendors forget to disable regions properly and set their FRAP bits
and FREG to 0. While not documented publicly this is being ignored by the
chipset(s)[1] and hence flashrom should do so too. Without this patch
flashrom prints a warning and disables writes.
The check for i (region index) excludes the descriptor region which should not
be becessary because specs suggest that the descriptor region should not
be locked, but if vendors would follow the specs this patch would not have
been necessary in the first place.
[1]: http://www.flashrom.org/pipermail/flashrom/2012-May/009303.html
Corresponding to flashrom svn r1587.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Helge Wagner's patch that added VIA VX900 chipset support made me look
closer at the datasheets which led to some concise documentation about
newer VIA chipsets: http://flashrom.org/VIA
Based on that this patch adds full support for VX800/VX820, VX855/VX875
and VX900, including SPI and LPC. VT8237S was not changed (SPI support
only) because there is no public datasheet and it is not clear how to
distinguish between LPC and SPI strapping and investigations in (NDAed)
documents have not brought up anything conclusively.
enable_flash_vt823x could probably be enhanced too due to various
ignored LPC options of the chipset.
Corresponding to flashrom svn r1578.
Signed-off-by: Helge Wagner <Helge.Wagner@ge.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This includes not only the notorious read-only flash descriptors and locked ME
regions, but also the more rarely used PRs (Protected Ranges).
The user can enforce write support by specifying ich_spi_force=yes in the
programmer options, but we don't tell him the exact syntax interactively. He
has to read it up in the man page.
Corresponding to flashrom svn r1494.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All programmer types (Parallel, SPI, Opaque) now register themselves
into a generic programmer list and probing is now programmer-centric
instead of chip-centric.
Registering multiple SPI/... masters at the same time is now possible
without any problems. Handling multiple flash chips is still unchanged,
but now we have the infrastructure to deal with "dual BIOS" and "one
flash behind southbridge and one flash behind EC" sanely.
A nice side effect is that this patch kills quite a few global variables
and improves the situation for libflashrom.
Hint for developers:
struct {spi,par,opaque}_programmer now have a void *data pointer to
store any additional programmer-specific data, e.g. hardware
configuration info.
Note:
flashrom -f -c FOO -r forced_read.bin
does not work anymore. We have to find an architecturally clean way to
solve this.
Corresponding to flashrom svn r1475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
