The new enum test_state looks like this:
enum test_state {
OK = 0,
NT = 1, /* Not tested */
BAD, /* Known to not work */
DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */
NA, /* Not applicable (e.g. write support on ROM chips) */
};
The second new state 'NA' is introduced, among other things, to indicate
the erase and write states of real ROMs correctly. This is also implemented
by this patch and required to exchange the previous bit mask in struct
flashchip with a new struct containing an enum test_state for each operation.
The -L output is changed accordingly to print '-' in the case of an N/A state
and the wiki output uses a new template producing a greyed out cell.
Previous users of enum test_state are not affected by this change (yet).
Corresponding to flashrom svn r1798.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No datasheet available. Tested read, write and all erasers separately by
The Raven. He did also provide the patch but refused to sign it off.
Corresponding to flashrom svn r1796.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is very similar to LE25FW418A, except for HD_READ support (that
is not implemented in flashrom anyway yet) and allowed voltage range.
Probing, erasing, reading and writing has been tested.
This chip is found on Seagate Constellation hard drives.
Corresponding to flashrom svn r1791.
Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on hardware by Idwer too.
Corresponding to flashrom svn r1787.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested with actual S25FL164K via Arduino SPI.
Corresponding to flashrom svn r1786.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of the whole family.
Corresponding to flashrom svn r1785.
Signed-off-by: Jason Harper <jharper@iseis.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1784.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Reorder some models and refine comments.
- Add SST25VF512A:
AAI is available but with an uncommon opcode (0xAF). Fully tested
with Bus Pirate 3.5 running 6.2 beta firmware by Cory.
- Add SST25VF020 and SST25VF020B.
Corresponding to flashrom svn r1758.
Signed-off-by: Cory Henderson <dcoryh192@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1737.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There are two locking strategies used by this umbrella family, one uniform
and one that matches the sector layout of the chip. Refactor the functions
involved and rename the overly complicated file to just stm50.c and the
functions accordingly.
This fixes unlocking of some of the non-uniform chips and gets rid of the
abuse of page_size.
Corresponding to flashrom svn r1736.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch replaces Alex Mauer's previous patch for this board (from 2008).
Tested to read, erase, and write on 2 different boards, both with AMIC
A29040BL flash chips, using both stock BIOS and coreboot images.
This patch marks the AMIC chip as tested at the same time.
Corresponding to flashrom svn r1733.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This one is even more strange than the AT45DB chips. Like the AT45DB321C
it does not support any power-of-2 page sizes. There is only one asymmetrical
eraser and that uses two opcodes.
Corresponding to flashrom svn r1725.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It seems like this model is one-of-a-kind... it shares some properties
with the older versions of the AT45DB series as well as with new ones.
Corresponding to flashrom svn r1724.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1722.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Micron acquired Numonyx and asked us to change the vendor names to
"Micron". For the chips clearly emerging from the former
manufacturers we (will) use "Micron/Numonyx/ST" and the original
name for the rest. Resorting the chip entries makes the diff
unreadable, hence the stand-alone commit.
Corresponding to flashrom svn r1703.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- N25Q128..3E
- N25Q128..1E
- N25Q256..1E (defunct due to addressing)
- N25Q256..3E (defunct due to addressing)
- N25Q512..1E (defunct due to addressing)
- N25Q512..3E (defunct due to addressing)
- N25Q00A..3G (defunct due to addressing)
Also, refine existing family members.
Corresponding to flashrom svn r1693.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- S25FL128S
- S25FL256S uniform version (defunct due to addressing)
- S25FL512S uniform version (defunct due to addressing)
Merge Intel S33 status register functions with this one's.
Corresponding to flashrom svn r1692.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- S25FL204K
- S25FL208K
- S25FL216K (same ID as S25FL116K)
Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of all family
members and add OTP details.
Corresponding to flashrom svn r1690.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine unlocking of A25L032, A25LQ32A and A25LQ032.
Corresponding to flashrom svn r1689.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- EN25QH64
- EN25QH128
- EN25QH256 (defunct due to addressing)
Corresponding to flashrom svn r1688.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- spi_prettyprint_status_register_default_welwip():
It just prettyprints the plain hex value and the welwip bits.
- spi_prettyprint_status_register_default_bp4():
Prints the hex value, welwip, bp0-5 and srwd bits.
- spi_disable_blockprotect_bp2_srwd(),
- spi_disable_blockprotect_bp3_srwd() and
spi_disable_blockprotect_bp4_srwd():
Three new common block unprotection functions for the frequent
cases where there is a status register lock bit at bit #7 and some
block protection bits at bits #2-#4, #2-#5 and #2-#6 respectively.
Corresponding to flashrom svn r1681.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I broke unlocking them correctly in r1635 while refactoring (NB: the
commit log including the overly selfconfident statement about the
"bug in spi_disable_blockprotect_at25df()").
Affected chips have per sector protection bits and the write protection bits
in the status register do indicate if none, some or all sectors are protected.
It is possible to globally (un)lock all sectors at once but in a way that was
not anticipated when refactoring the spi25 unlocking functions into
spi_disable_blockprotect_generic(). To globally unprotect not only the
protection bits (2 and 3) have 0 to be written to them but also bits 4 and 5
which normally would not be touched by spi_disable_blockprotect_generic().
Some of the chips also support a permanent lockdown with fuses which we
do not handle yet.
To fix this without copying the whole method I introduce another mask
parameter to spi_disable_blockprotect_generic() namely unprotect_mask.
See verbose comments inline for details.
Also, prettyprint the status register after trying to disable the block
protection fails.
Corresponding to flashrom svn r1679.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Chi Zhang <zhangchi866@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips.
Rename the existing chips and add a .voltage entry where it was missing.
- Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips.
- Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=469707f0d9b7d81b6c6bb2cace13f09db70f4382
Corresponding to flashrom svn r1677.
Signed-off-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds support for
- Pm25LD256C
- Pm25LD512(C)
- Pm25LD010(C)
- Pm25LD020(C)
- Pm25LD040(C)
These seem to be the successors of the Pm25LV series.
The main difference seems to be the dual I/O and additional erase opcodes.
Some support an additional, complex locking register (maybe all of the
above, but available datahsheets do not indicate it for all).
The Pm25LD512C was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1579
Corresponding to flashrom svn r1671.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Add missing bits and resort chips
- Refine Pm25LV512(A) and Pm25LV010
Due to manufacturer ID continuation this one needs a new probing
function: probe_spi_res3() which should be refactored in the future.
The datasheet describes a very weird order of ID bytes:
Vendor byte, model byte, vendor continuation byte. Let's pretend we did
not read that or the datasheet is bogus (although the datasheet of the
successor series describes the same but luckily additionally to RDID).
- Add Pm25LV010A
This was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1573
Corresponding to flashrom svn r1670.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similarly to the patch in r1647 this one updates the chips identified as above
with references to and data about their respective twins. Unlike previously this
one deals with the more evil details.
Helge Wagner from GE discovered some problems with chips sharing IDs
and proposed a patch to tackle (some of) them, see:
http://patchwork.coreboot.org/patch/3709/
That patch was bitrotting in our mailboxes for a long time and it is still not
ready for merge, but we increasingly get reports about problems (e.g.
http://paste.flashrom.org/view.php?id=1525) regarding these chips and
hence must act to ensure users' safety.
This patch splits the chip definitions of evil twins into separate ones which
correctly declare the respective attributes (the main problems are the erase
block sizes for the 0x20 opcode and hence my changes combine different
chips with partly different attributes apart from their names as long as the
erasers layout it the same). This forces the user to select the (right) chip
definition with the -c/--chip parameter and hence will break a number of
previously perfectly working environments.
0x2015 is used by and split to
- MX25L1605 (64kB sectors in 0x20 erases)
- MX25L1605A/MX25L1606E (4kB in 0x20 erases and an additional 0x52 opcode with 64kB blocks)
- MX25L1605D/MX25L1608D (4k sectors in 0x20 erases)
0x2016 is used by and split to
- MX25L3205/MX25L3205A (64kB 0x20)
- MX25L3205D/MX25L3208D (4kB 0x20)
- MX25L3206E (4k 0x20, 64k 0x52)
0x2017 is used by and split to
- MX25L6405/MX25L6405D (64k 0x20)
- MX25L6406E/MX25L6436E (4k 0x20)
- MX25L6445E (4k 0x20, 64k 0x52)
Bonus: add some minor details to MX25L1635D, MX25L1635E, MX25L3235D,
MX25L12805D.
Tested with MX25L3206E, MX25L64036E.
Corresponding to flashrom svn r1657.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Macronix MX25U3235 is a 4MB (32Mbits) 1.8v SPI flash supporting QPI.
Code for it was refined after merging it from chromium:
Change-Id: I62c7db070254ba3ec68090e783f57b25a6e8d15a
Reviewed-on: https://gerrit.chromium.org/gerrit/44395
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Based on that support for MX25U1635E and MX25U6435E/F was added
by Stefan Tauner.
Also, add a feature flag for QPI-enabled chips: FEATURE_QPI.
Corresponding to flashrom svn r1655.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This older (ST-branded) revision of M25P20 chip does not support RDID and
hence was not detected correctly. This patch adds a workaround similar
to M25P40-old.
Corresponding to flashrom svn r1652.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Update MX25L512 with references to and data about
MX25L512E, MX25V512, MX25V512C.
Update MX25L1005 with references to and data about
MX25L1005C, MX25L1006E.
Update MX25L2005 with references to and data about
MX25L2005C.
Update MX25L4005 with references to and data about
MX25L4005A, MX25L4005C.
Update MX25L8005 with references to and data about
MX25V8005.
Bonus: add chip IDs of MX25U1635E, MX25U3235E/F, MX25U6435E/F.
Corresponding to flashrom svn r1647.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds support for the following chips:
- AT25F512, AT25F512A, AT25F512B
- AT25F1024, AT25F1024A
- AT25F2048
- AT25F4096
Besides the definitions of the the chips in flashchips.c this includes
- a dedicated probing method (probe_spi_at25f)
- pretty printing methods (spi_prettyprint_status_register_at25f*), and
- unlocking methods (spi_disable_blockprotect_at25f*)
Corresponding to flashrom svn r1637.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This includes:
Bottom boot block:
* 16Mb/2MB:
QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8
* 32Mb/4MB:
QB25F320S33B8, QH25F320S33B8
* 64Mb/8MB:
QB25F640S33B8, QH25F640S33B8
Top boot block:
* 16Mb/2MB:
QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8
* 32Mb/4MB:
QB25F320S33T8, QH25F320S33T8
* 64Mb/8MB:
QB25F640S33T8, QH25F640S33T8
At least some seem to be marketed by other vendors (too?) but also with
Intel's vendor ID.
Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they
support also erasing the top/bottom 8 8kB blocks with opcode 0x40.
But since this command fails for all addresses outside those ranges,
it is not easily implemented with flashrom's current code base and
hence left out.
Corresponding to flashrom svn r1636.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Move all functions related to SPI status registers to a new file
spi25_statusreg.c. This includes the generic as well as the
SST-specific functions from spi25.c and the chip-specific functions
from a25.c and at25.c.
- introduce helper functions
* spi_prettyprint_status_register_hex()
* spi_prettyprint_status_register_bpl()
* spi_prettyprint_status_register_plain()
Use the latter on every compatible flash chip that has no better printlock
function set and get rid of the implicit pretty printing in the SPI probing
functions.
- remove
* spi_prettyprint_status_register_common()
* spi_prettyprint_status_register_amic_a25lq032() because it can be fully
substituted with spi_prettyprint_status_register_amic_a25l032().
* spi_prettyprint_status_register() (old switch, no longer needed)
- promote and export
* spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1().
* spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2().
* spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3().
- add #define TEST_BAD_REW and use it for a number of Atmel chips which
had only TEST_BAD_READ set even though they dont have erasers or a write
function set.
Corresponding to flashrom svn r1634.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks.
W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks.
W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks.
The W39F010 code was tested with a satasii programmer. The first write
attempt after an erase returned with verify failure, but the second
write attempt was succesful:
http://paste.flashrom.org/view.php?id=1418
Corresponding to flashrom svn r1620.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Wicked chip: No WRSR, no write enable command (but swallows our
default one without a problem), supports an auto-erasing page write
(but even without that page writes are recommended to write the
whole page i.e. operate on a completely erased page), mad
requirements on block refreshments if only partly written.
Found on my Intel D946GZIS and tested with my serprog in situ.
Using the page write by setting JEDEC_BYTE_PROGRAM to 0x11 and using
the spi_chip_write_256 command greatly improves performance and works
flawlessly.
Corresponding to flashrom svn r1616.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The 32Mb version has 1.8V and 3.0V versions, the smaller one 1.8V only
(or Numonyx/Micron forgot to publish it). Another difference is that the
16Mb chip has 32 kB subsectors (erase opcode 0x52). As long as there
are no funky configurations like for the 128Mb chips, we got the smaller
parts covered with this change.
Corresponding to flashrom svn r1615.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch differentiates between the N25Q064 1.8V version and 3.0V
version which have different JEDEC IDs.
It extends the chip name to include more characters of the part
number. The first two of those characters indicate the process
technology (65nm) and feature set (hold pin etc.), neither of which
matter for flashrom at the moment. The third and fourth characters
specify voltage and block/sector size and uniformity, which are
important and hence included.
To abstract the irrelevant portions of the part number leading up to
the characters we care about, dots are used. This helps prevent
unwanted changes in chip name that can break fragile scripts and
confuse people. More about this schema here:
http://www.flashrom.org/pipermail/flashrom/2012-July/009595.html
Corresponding to flashrom svn r1612.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This includes SST25WF512, SST25WF010, SST25WF020 and SST25WF040.
They require a VCC of 1.65 - 1.95V, which is why i could not test them.
The SOIC version of the SST25WF512 is used on an AMD X300-based
graphics card i own.
Corresponding to flashrom svn r1611.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
