Add -I/usr/pkg/include to NetBSD/Dragon Fly build example CPPFLAGS.
This is needed to pick up libftdi.
Corresponding to flashrom svn r1519.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This solution is copied from ft2232_spi and is equally hacky.
Thanks to M.K. for investigating the history of <linux/spi/spidev.h>, which
led to a hopefully more robust check.
Corresponding to flashrom svn r1517.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The submission of zero-sized read requests in a write-only transaction
fails at least for omap2_mcspi drivers and is pointless in general.
This patch does not address the implementation of zero-sized writes (which
would need to skip the write command), as there are no flash transactions
not starting with a command.
Corresponding to flashrom svn r1513.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously we relied on a correctly set up state.
Also, we start to rely on the shutdown function for cleanup after
registering it, i.e. we no longer explicitly call close(fd) after
register_shutdown().
Corresponding to flashrom svn r1512.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
SFDP parameter table reads expect a dummy byte between written data
(opcode+address) and read data on the SPI bus. Read that dummy byte
instead of writing it to be compatible with all programmer drivers.
Reduce SFDP parameter table read chunk size from 8 to 2 to handle
programmers with small readcount limits.
Corresponding to flashrom svn r1506.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it
looked for eraser slots that have no erase functions set instead of
those that have one set.
Postpone adding an erase function for the special 4k block erase
opcode until we know the flash chip size and add an additional check
to sfdp_add_uniform_eraser.
Fix the output of the parameter table contents.
This patch fixes the index used to retrieve the eraser types, which
was off one double word.
Refine some messages and add a few further debugging prints.
Corresponding to flashrom svn r1505.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.
This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.
Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)
Tested-by: David Hendricks <dhendrix@google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
Thanks also to Michael Karcher for his comments and preliminary review!
Corresponding to flashrom svn r1500.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The sections describing the various options of the internal and dummy
programmers have grown out of proportions. This patch adds some headlines
to devide the unrelated topics a bit (with .TP commands). The previous indented
paragraphs for the various programmers were transformed to subsections (.SS).
Also, rephrase the documention related to laptops completely to make it
less redundant and more informative.
Document the laptop=this_is_not_a_laptop internal programmer parameter
Change the contact info in the bugs section by removing the trac
reference and adding IRC (and the pastebin) instead.
Remove some superfluous white space and a .RE (restore indentation) command.
Corresponding to flashrom svn r1497.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Forced read functionality was disabled when programmer registration was
merged in r1475.
We now support registering more than one controller at once for each bus
type. This can happen e.g. if one SPI controller has an attached flash
chip and one controller doesn't. In such a case we rely on the probe
mechanism to find exactly one chip, and the probe mechanism will
remember which controller/bus the flash chip is attached to. A forced
read does not have the luxury of knowing which compatible controller to
use, so this case is handled by always picking the first one. That may
or may not be the correct one, but there is no way (yet) to specify
which controller a flash chip is attached to.
Corresponding to flashrom svn r1496.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
MinGW uses standard Windows C libraries and those apparently don't
support %hhx for sscanf into a uint8_t. SCNx8 isn't available either.
Corresponding to flashrom svn r1495.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
This includes not only the notorious read-only flash descriptors and locked ME
regions, but also the more rarely used PRs (Protected Ranges).
The user can enforce write support by specifying ich_spi_force=yes in the
programmer options, but we don't tell him the exact syntax interactively. He
has to read it up in the man page.
Corresponding to flashrom svn r1494.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Some flash chips contain OTP memory that we cannot read or write (yet). This
prohibits us from cloning them, hence warn the user if we detect it. Not all
variations of the tagged chips contain OTP memory. They are often only
enabled on request or have there own ordering numbers. There is usually no
way to distinguish them. Because this is a supposedly seldomly used feature
the warning is shown in with dbg verbosity.
The manpage is extended to describe the backgrounds a bit.
Corresponding to flashrom svn r1493.
This patch is based on the idea and code of Daniel Lenski.
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Note: The internal programmer will abort during processor check. This is
intentional.
The other hardware drivers (except those using port I/O) should work.
Corresponding to flashrom svn r1492.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: David Hendricks <dhendrix@google.com>
Tested-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Usage:
flashrom -p dummy:spi_blacklist=commandlist
flashrom -p dummy:spi_ignorelist=commandlist
If commandlist is 0302, flashrom will refuse (blacklist) or ignore
(ignorelist) command 0x03 (READ) and command 0x02 (WRITE). The
commandlist can be up to 512 bytes (256 commands) long.
Specifying flash chip emulation is a good idea to get useful results.
Very useful for testing corner cases if you don't own a locked down
Intel chipset and want to simulate such a thing.
Example usage:
dd if=/dev/zeros bs=1024k count=4 of=dummy_simulator.rom
dd if=/dev/urandom bs=1024k count=4 of=randomimage.rom
flashrom -p dummy:emulate=SST25VF032B,image=dummy_simulator.rom,\
spi_blacklist=20,spi_ignorelist=52 -w randomimage.rom -V
Corresponding to flashrom svn r1490.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
Tested on Bifferboard.
Corresponding to flashrom svn r1489.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously only the generic "unknown XXXX SPI chips" were ignored (because their
name started with "unknown".
This patch adds also all chips whose vendor starts with "Unknown" (none so far)
and "Programmer" (currently used by the opaque flash chip framework) .
A patch will add the SFDP chip template with an "Unknown" vendor field later.
Rationale: these entries do not contain any useful information when shown in -L
or wiki output. It would be better to add them to a general feature section or similar.
Corresponding to flashrom svn r1488.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds a generic phase 2 board enable that does nothing but set
is_laptop to 0 to circumvent an erroneous laptop detection due to ambigous
DMI chassis information.
Corresponding to flashrom svn r1487.
Signed-off-by: Ingo Feldschmid <ifel@msc-ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Typical AWARD enable structure with an ICH GPIO board enable.
This board seems also to be known as D2544-B1.
Success report:
http://www.flashrom.org/pipermail/flashrom/2012-January/008590.html
Corresponding to flashrom svn r1486.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Oliver Rath <rath@mglug.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
If a chip is unknown the user is asked to test and report the result to
the mailing list. Having `-VE` listed as the last option can result in
an unbootable system for users not knowing what the command does, since
rebooting the system after that command is fatal since the flash chip is
empty. Example report at
http://www.flashrom.org/pipermail/flashrom/2012-January/008551.html
Reorder the options to prevent such accidents in the future.
Suggested by Idwer Vollering.
Corresponding to flashrom svn r1485.
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Layout file reading should happen after option parsing like all other
file accesses.
Guard against multiple --layout parameters.
Followup fix for r1483: Remove -m short option from getopt.
Corresponding to flashrom svn r1484.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The general idea and most of the code are based on the following
commits in the chromiumos flashrom tree:
Corresponding to flashrom svn r1482.
8fc0740356ca15d02fb1c65ab43b10844f148c3b
bb9049c66ca55e0dc621dd2c70b5d2cb6e5179bf
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
and the main part:
d0ea9ed71e7f86bb8e8db2ca7c32a96de25343d8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
This implementation does not defer the processing until doit(), but after the
argument parsing loop only (doit() should not contain argument checks).
This allows to specify -i and -l parameters in any order.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
- rename from find_next_included_romentry to get_next_included_romentry
- return a pointer to a rom_entry instead of just its index.
this relieves the (single existing) caller from directly accessing the
data structure holding the entries hence improving segregation and
readability.
Corresponding to flashrom svn r1481.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds an external utility that shares most of the existing descriptor
decoding source code. Additionally to what is available via FDOC/FDOD this
allows to access:
- the softstraps which are used to configure the chipset by flash content
without the need for BIOS routines. on ICH8 it is possible to read those
with FDOC/FDOC too, but this was removed in later chipsets.
- the ME VSCC (Vendor Specific Component Capabilities) table. simply put,
this is an SPI chip database used to figure out the flash's capabilities.
- the MAC address stored in the GbE image.
Intel thinks this information should be confidential for ICH9 and up, but
references some tidbits in their public documentation.
This patch includes the human-readable information for ICH8, Ibex Peak
(5 series) and Cougar Point (6 series); the latter two were obtained from
leaked "SPI Flash Programming Guides" found by google. Data regarding ICH9
and 10 is unknown to us yet. It can probably found in:
"Intel® ICH7, ICH8, ICH9 and ICH10 — SPI Family Flash Programming Guide"
Information regarding the upcoming Panther Point chipset is also not included.
Corresponding to flashrom svn r1480.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Matthias Wenzel <bios@mazzoo.de>
As reported by Stefan Tauner on IRC, the new programmer-centric logic
is broken by re-using occupied members of the flashes array when changing
to the next programmer. This fixes it.
patch v2:
prevent probing one chip per programmer even if the array is full. Using
a do-while loop was a bad idea.
Corresponding to flashrom svn r1479.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
These devices have an additional output buffer which is activated only
by pulling ADBUS4 low. This patch was real-life tested with
arm-usb-ocd; arm-usb-ocd-h should be the same (as it shares the same
documentation).
Corresponding to flashrom svn r1478.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All chips which use spi_chip_write_256 should be written at native
speed. Chips using spi_chip_write_1 or spi_chip_write_aai will
still be slow.
Thanks to Steven A. Falco for testing with a ST/Numonyx M25P16.
Thanks to David Hendricks for testing with a Winbond W25Q64.
Corresponding to flashrom svn r1477.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Steven A. Falco <sfalco@coincident.com>
Switch from host OS detection to target OS detection.
Complain about unknown target OS/architecture.
Disable annoying format string warnings on DJGPP.
Native and cross-compilation now usually just require setting CC.
Examples:
make CC=i586-pc-msdosdjgpp-gcc
make CC="clang -m64"
make CC=i686-w64-mingw32-gcc
Tested for a boatload of native and cross compilation configurations.
There is a new target "make libpayload" in case you don't want to
specify all tools by hand.
Corresponding to flashrom svn r1476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
All programmer types (Parallel, SPI, Opaque) now register themselves
into a generic programmer list and probing is now programmer-centric
instead of chip-centric.
Registering multiple SPI/... masters at the same time is now possible
without any problems. Handling multiple flash chips is still unchanged,
but now we have the infrastructure to deal with "dual BIOS" and "one
flash behind southbridge and one flash behind EC" sanely.
A nice side effect is that this patch kills quite a few global variables
and improves the situation for libflashrom.
Hint for developers:
struct {spi,par,opaque}_programmer now have a void *data pointer to
store any additional programmer-specific data, e.g. hardware
configuration info.
Note:
flashrom -f -c FOO -r forced_read.bin
does not work anymore. We have to find an architecturally clean way to
solve this.
Corresponding to flashrom svn r1475.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Corresponding to flashrom svn r1474.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Corresponding to flashrom svn r1473.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Move Asus A8Jm, Asus M6Ne to the laptop section.
No working URL for the A8Jm found.
Corresponding to flashrom svn r1472.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Corresponding to flashrom svn r1470.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Paul with some polishing by Stefan.
Success log:
http://www.flashrom.org/pipermail/flashrom/2011-November/008257.html
Corresponding to flashrom svn r1468.
Signed-off-by: Joshua Roys <roysjosh at gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
