Introduce the `i2c_open_from_programmer_params` function to avoid having
to duplicate parameter parsing code on all I2C programmers. This also
allows having the same programmer parameters on all I2C programmers.
Change-Id: I006b311c88feea37fe4b217f769b21ca1505def9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/52830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Some callers may find it easier to provide the path to an I2C device
at which to communicate with the device, rather than specify the bus
number- doing so might involve trying to parse a path to extract the
number only for flashrom to do the reverse, which is error-prone and
unnecessary.
This change adds support for a `devpath` option, continuing to
allow `bus` and requiring only one of them be specified.
TEST=Verified --flash-size outputs correct values with both
devpath=/dev/i2c-7 and bus=7, as well as noting that one is
required if neither is specified and only one may be specified
if both are given.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Change-Id: Id2adf8a307b9205ce5e5804a6c3e22f19d0c34c9
Reviewed-on: https://review.coreboot.org/c/flashrom/+/51967
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace log lines with the prefix formatter '%s: ..' and pass
'__func__' to the printers so that errors are prefixed with the
function from which they originated.
BUG=b:154285774
BRANCH=none
TEST=build success
Change-Id: If3205d8e453cfcd37f725b4fd135fe1221c913c0
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40901
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ChromiumOS flashrom fork has since const'ify flashctx
in a few places. This aligns the function signatures to
match with downstream to ease forward porting patches
out of downstream back into mainline flashrom.
This patch is minimum viable alignment and so feedback is
welcome.
Change-Id: Iff6dbda13cb0d941481c0d204b9c30895630fbd1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40324
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clean up some confusion of implicit copies by indirection.
This allows the caller of register_spi_master() to have it's
internal state in the expected way.
Also add an error when the mpu reset fails on init.
BUG=b:148746232,b:153027771,b:140394053
BRANCH=none
TEST=builds
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Change-Id: I66ba4ffeb696309b8ad5b5ba58650630e8feefa9
Reviewed-on: https://review.coreboot.org/c/flashrom/+/40470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This adds support for the Parade lspcon usb-c to HDMI protocol
translater part that is i2c-controlled. The support allows the
host to reach the SPI ROM that hangs off the part where it
stores its firmware.
Usage is as follows:
flashrom -p lspcon_i2c_spi:bus=X
where X is the bus number.
BUG=b:148746232
BRANCH=none
TEST=tested with following commands, read/write/erase works good.
flashrom -p lspcon_i2c_spi:bus=7 -r /tmp/foo;
flashrom -p lspcon_i2c_spi:bus=7 -E;
flashrom -p lspcon_i2c_spi:bus=7 -w /tmp/foo;
Change-Id: I039e683252cfaf1ffef8694a3e8081b1b6b944f7
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/39687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
