The reverse engineering was done by Joshua. The actual patch was
fabricated by Stefan.
Request:
http://www.flashrom.org/pipermail/flashrom/2011-November/008241.html
Success report:
http://paste.flashrom.org/view.php?id=914
Corresponding to flashrom svn r1467.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Mugendai <mugendai42@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This looks suspiciously like intel_ich_gpio_set.
Based on that, add board enables for the ASUS P5N-D and P5N-E SLI.
This was tested by Guillaume Poirier-Morency on a P5N-D:
http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html
Corresponding to flashrom svn r1466.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Small changes were also contributed and
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Changes related to P5GD1 variants:
- Reorder "P5GD1 Pro" in print.c and include a DMI patter to its board enable
- Add an untested "P5GD1(-VM)" board enable and add an entry to print.c
- Add P5GD1-VM/S variant as reported by "Limer"
Changes related to P5GD(2/C) variants:
- Fix the name of "P5GDC-V Deluxe" board enable and add a DMI pattern and
print.c entry. NB: there is no "P5GDC-V" board.
- Add a generic match for P5GD(2/C)* boards with a not tested tag.
This are the potential targets for this according to the asus ftp:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/
Unsupported variants of the P5GD2:
P5GD2, P5GD2 Deluxe, P5GD2 Pro, P5GD2-X
(P5GD2 Premium is already tested)
(there seems to be also a P5GD2-TVM/GB/SI in the wild, which is not known to
asus :)
Unsupported variants of the P5GDC:
P5GDC Pro, P5GDC-MX
(P5GDC Deluxe and P5GDC-V Deluxe are already tested)
References:
P5GD1 PRO (dmi "P5GD1 PRO")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, *0x814e*
http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html
P5GD1 (dmi "P5GD1")
The non-pro version seems to match the pro pci pattern, but could be
distinguished by the SATA ID of 1043:2604 vs. 1043:2601:
https://launchpadlibrarian.net/62167576/Lspci.txt
or a DMI pattern of course.
P5GD1-VM (dmi "P5GD1-VM")
This does also match the current PCI IDs.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/465379
- P5GD2 Premium (dmi "P5GD2-Premium")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-August/004555.html
- P5GDC-V Deluxe (dmi "P5GDC-V")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004939.html
- P5GDC Deluxe (dmi "P5GDC")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004684.html
- P5GDC Pro, P5GDC-MX, P5GD2-X, P5GD2 Pro, P5GD2
no useful logs found
- P5GD2-Deluxe (dmi "P5GD2-Deluxe")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/572514
- P5GD2-TVM/GB/SI (dmi "P5GD2-TVM/GB/SI")
smbus: 0x8086, 0x266a, 0x1043, 0x266a; audio: 0x8086, 0x2668, 0x1043, *0x81a7*
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/462500
Corresponding to flashrom svn r1457.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
and due to the tremendous interest... ;)
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I disassembled the write enable and the write disable functions from
the Award BIOS image and reconstructed C code to understand for
myself what happens. For details see:
http://www.flashrom.org/pipermail/flashrom/2011-October/008033.html
I compared the download pages of both, abit AV8 and abit AV8-3rd Eye,
and the BIOS downloads are the same. So it's save to assume that this
board enable works on both versions. Tested on AV8.
Corresponding to flashrom svn r1455.
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Besides adding output for the voltage ranges, this patch also changes
various aspects of the -L output:
- sizes are right aligned now with a fixed length of 5
- space between columns is selectable with a constant
- test results are always shown in the same column ("PR" and " R"
instead of "PR" and "R ")
- vendor and device names are split on a delimiter (currently '/') and
spread over mutliple lines but only if the tokens are not too short.
all other columns are printed on the first line of a chip.
- voltage ranges are printed in verbose mode only
it also gets rid of POS_PRINT and digits
Corresponding to flashrom svn r1438.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Based on the REing of Michael Karcher and a good guess of Idwer Vollering.
Corresponding to flashrom svn r1419.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Leon Zhang <leoncamel at gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html
Tested-by: medhi <nefkongo@hotmail.com>
http://paste.flashrom.org/view.php?id=779
Acked-by: Idwer Vollering <vidwer@gmail.com>
This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There are numerous other variants of the P5LD2 which vary wildly not only in
PCB layout but also in northbridges used, number of PCI, PCI-E and DIMM slots
etc. This one is for the plain P5LD2 without any suffixes.
This patch is essentially a rebased version of Joshua's patch, which was never
tested (user did not reply). I have added additional PCI IDs and the DMI pattern
and also changed the status to NT. An entry in the print.c table was also added.
http://www.flashrom.org/pipermail/flashrom/2010-October/005080.html
Corresponding to flashrom svn r1410.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is based on Joshua Roys' RE.
http://www.flashrom.org/pipermail/flashrom/2011-August/007504.html
Corresponding to flashrom svn r1408.
Tested-by: Márton Miklós
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- retag it as OK (tested by Jonathan Kollasch when he wrote it)
http://patchwork.coreboot.org/patch/2106/
- add a line with identical pci ids but a different DMI pattern, so that EP-9NPA7I
is also matched. combining multiple boards in one line is problematic due to
print.c's detection of board enables - so dont bother for now.
http://www.flashrom.org/pipermail/flashrom/2011-June/006878.html
See previous commit for additional information.
Corresponding to flashrom svn r1406.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- add J-7BXAN to the list of supported boards
http://www.flashrom.org/pipermail/flashrom/2011-July/007397.html
- fix urls, typos, whitespace etc.
- fix counting of supported chips in the wiki output
Corresponding to flashrom svn r1393.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
the last one is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
everything else is
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
P5N-E SLI, EP-8NPA7I and EP-9NPA7I all need at least this patch:
http://patchwork.coreboot.org/patch/2125/
the P5N-E also needs a board enable:
http://patchwork.coreboot.org/patch/3298/
mark the boards as not working until those are merged.
Corresponding to flashrom svn r1382.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1369.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
with small changes:
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
http://patchwork.coreboot.org/patch/2893/
lspci: http://paste.flashrom.org/view.php?id=494
only writing a backup file was tested, so mark it as untested.
Corresponding to flashrom svn r1368.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested reading, writing and verification, all worked fine.
Corresponding to flashrom svn r1346.
Signed-off-by: Pawel Rozanski <rozie@poczta.onet.pl>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- missing spaces in code and output
- improved documentation/naming/output
- missing line breaks in spi probing functions
Corresponding to flashrom svn r1321.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Without this the magic numbers need to be kept in sync with the maximum
length of the strings printed in the corresponding column. if not, an
overflow and a nasty ' '-storm occur on executing flashrom -L.
Corresponding to flashrom svn r1318.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).
Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This moves 99.5% of the .data section to .rodata (which ends up in .text).
Corresponding to flashrom svn r1293.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Simplify pcidev_init by killing the vendorid parameter which was pretty
useless anyway since it was present in the pcidevs parameter as well.
This also allows us to handle multiple programmers with different vendor
IDs in the same driver.
Fix compilation of flashrom with only the nicrealtek driver.
Corresponding to flashrom svn r1274.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Mark EVGA nForce 780i board as supported.
Full logs are here:
http://www.flashrom.org/pipermail/flashrom/2011-January/005779.html
Corresponding to flashrom svn r1269.
Signed-off-by: Brandon Dowdy <brandonrd7@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
