These are very similar to Eon's EN25B series but unlike those the
EN25P has uniform sectors (of 32 and 64 kB). They can not be
distinguished by RDID alone but the RES and REMS IDs are different
and hence could be detected eventually in the future. This patch
also refines tiny bits of the EN25B series.
The series includes:
- EN25P05
- EN25P10
- EN25P20
- EN25P40
- EN25P80
- EN25P16
- EN25P32
- EN25P64
Corresponding to flashrom svn r1870.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is based on the code sent to the flashrom mailing list
by Alex Lu (alexlu6@mxic.com.tw) without sign-off.
Corresponding to flashrom svn r1867.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This flash chip can be configured (one time) to use 64 KiB or 256 KiB sectors.
Additionally, in the 64 KiB mode it supports 16 4 KiB sub-sectors that can be
(one time) programmed to be on the top or bottom of the device. The sub-sectors
can be erased with the 0x20 opcode but because this opcode does not work
with the remaining sectors and flashrom can not cope with that the 0x20
opcode is not supported yet.
This patch adds two definitions, one for the 64 KiB and 256 KiB configuration
respectively. The device also shares the RDID with the various S25FL128
devices so we have to increase the maximum number of successfully probed
chips to 8.
The 64 KiB mode was tested on real hardware.
Corresponding to flashrom svn r1858.
Signed-off-by: Jernej Škrabec <jernej.skrabec@planet.si>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Both use the same ID and are mostly identical.
Corresponding to flashrom svn r1857.
Tested-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1846.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Additionally to the existing S25FL128S......0 definition this patch
adds S25FL128P......0, S25FL128P......1 and S25FL128S......1, as well as
S25FL129P......0 and S25FL129P......1 definitions.
S25FL12xP seem to be the predecessor families of S25FL128S. All
associated chips can not be distinguished with RDID alone.
Besides the new chips, this patch also fixes the name of the previously
supported S25FL128S model with uniform 256 kB sectors
(S25FL128P......1 not 0) and adds the hybrid sector version (0) as well.
Due to the shared IDs the user has to select the right chip manually
with the -c parameter. To make this even possible, this patch enlarges
the respective array for results to 6.
Tested-by: Antonio Ospite <ao2@ao2.it>
with a S25FL129P......0.
Corresponding to flashrom svn r1838.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
29GL chips use a new 3-Byte device ID probing function at addresses
0x01, 0x0E, 0x0F.
Flash chip families supported by this method include...
- EON EN29GL
- Gigadevice GD29GL (if they really exist)
- ISSI (PMC) IS29GL
- Macronix MX29GL (+MX68GL1G0F)
- Spansion S29GL (+S70GL02G)
- Winbond W29GL
This patch adds respective flash chip definitions for chips up to 16 MB from
Eon, ISSI, Macronix and Winbond. Bigger chips as well as those from
Gigadevice and Spansion are left out.
Corresponding to flashrom svn r1835.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, slightly refine the definition of AT49LH002.
Corresponding to flashrom svn r1834.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The MX29F022(N)T definition was successfully tested by Daniele.
Corresponding to flashrom svn r1825.
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, add spi_disable_blockprotect_bp1_srwd().
Originally written and tested by The Raven <originalraven@hotmail.com>.
Corresponding to flashrom svn r1818.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1810.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Apparently PMC did not understand the purpose of the JEDEC
continuation code. These chips reply to RES (the only supported ID
command) with the prefix-less vendor ID, a device ID, eventually
followed by the continuation byte for the vendor ID.
This fix uses only the first two bytes instead of appending the
continuation code to the device ID. The problem was reported by The
Raven who also tested the fix on a Pm25LV010 (with an imprint of
"Pm25LV010E").
Corresponding to flashrom svn r1806.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1801.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
No datasheet available. Tested read, write and all erasers separately by
The Raven. He did also provide the patch but refused to sign it off.
Corresponding to flashrom svn r1796.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is very similar to LE25FW418A, except for HD_READ support (that
is not implemented in flashrom anyway yet) and allowed voltage range.
Probing, erasing, reading and writing has been tested.
This chip is found on Seagate Constellation hard drives.
Corresponding to flashrom svn r1791.
Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on hardware by Idwer too.
Corresponding to flashrom svn r1787.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested with actual S25FL164K via Arduino SPI.
Corresponding to flashrom svn r1786.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of the whole family.
Corresponding to flashrom svn r1785.
Signed-off-by: Jason Harper <jharper@iseis.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1784.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Reorder some models and refine comments.
- Add SST25VF512A:
AAI is available but with an uncommon opcode (0xAF). Fully tested
with Bus Pirate 3.5 running 6.2 beta firmware by Cory.
- Add SST25VF020 and SST25VF020B.
Corresponding to flashrom svn r1758.
Signed-off-by: Cory Henderson <dcoryh192@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1737.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1722.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- N25Q128..3E
- N25Q128..1E
- N25Q256..1E (defunct due to addressing)
- N25Q256..3E (defunct due to addressing)
- N25Q512..1E (defunct due to addressing)
- N25Q512..3E (defunct due to addressing)
- N25Q00A..3G (defunct due to addressing)
Also, refine existing family members.
Corresponding to flashrom svn r1693.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- S25FL128S
- S25FL256S uniform version (defunct due to addressing)
- S25FL512S uniform version (defunct due to addressing)
Merge Intel S33 status register functions with this one's.
Corresponding to flashrom svn r1692.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- S25FL204K
- S25FL208K
- S25FL216K (same ID as S25FL116K)
Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of all family
members and add OTP details.
Corresponding to flashrom svn r1690.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine unlocking of A25L032, A25LQ32A and A25LQ032.
Corresponding to flashrom svn r1689.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- EN25QH64
- EN25QH128
- EN25QH256 (defunct due to addressing)
Corresponding to flashrom svn r1688.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I broke unlocking them correctly in r1635 while refactoring (NB: the
commit log including the overly selfconfident statement about the
"bug in spi_disable_blockprotect_at25df()").
Affected chips have per sector protection bits and the write protection bits
in the status register do indicate if none, some or all sectors are protected.
It is possible to globally (un)lock all sectors at once but in a way that was
not anticipated when refactoring the spi25 unlocking functions into
spi_disable_blockprotect_generic(). To globally unprotect not only the
protection bits (2 and 3) have 0 to be written to them but also bits 4 and 5
which normally would not be touched by spi_disable_blockprotect_generic().
Some of the chips also support a permanent lockdown with fuses which we
do not handle yet.
To fix this without copying the whole method I introduce another mask
parameter to spi_disable_blockprotect_generic() namely unprotect_mask.
See verbose comments inline for details.
Also, prettyprint the status register after trying to disable the block
protection fails.
Corresponding to flashrom svn r1679.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Chi Zhang <zhangchi866@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips.
Rename the existing chips and add a .voltage entry where it was missing.
- Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips.
- Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=469707f0d9b7d81b6c6bb2cace13f09db70f4382
Corresponding to flashrom svn r1677.
Signed-off-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds support for
- Pm25LD256C
- Pm25LD512(C)
- Pm25LD010(C)
- Pm25LD020(C)
- Pm25LD040(C)
These seem to be the successors of the Pm25LV series.
The main difference seems to be the dual I/O and additional erase opcodes.
Some support an additional, complex locking register (maybe all of the
above, but available datahsheets do not indicate it for all).
The Pm25LD512C was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1579
Corresponding to flashrom svn r1671.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Add missing bits and resort chips
- Refine Pm25LV512(A) and Pm25LV010
Due to manufacturer ID continuation this one needs a new probing
function: probe_spi_res3() which should be refactored in the future.
The datasheet describes a very weird order of ID bytes:
Vendor byte, model byte, vendor continuation byte. Let's pretend we did
not read that or the datasheet is bogus (although the datasheet of the
successor series describes the same but luckily additionally to RDID).
- Add Pm25LV010A
This was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1573
Corresponding to flashrom svn r1670.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similarly to the patch in r1647 this one updates the chips identified as above
with references to and data about their respective twins. Unlike previously this
one deals with the more evil details.
Helge Wagner from GE discovered some problems with chips sharing IDs
and proposed a patch to tackle (some of) them, see:
http://patchwork.coreboot.org/patch/3709/
That patch was bitrotting in our mailboxes for a long time and it is still not
ready for merge, but we increasingly get reports about problems (e.g.
http://paste.flashrom.org/view.php?id=1525) regarding these chips and
hence must act to ensure users' safety.
This patch splits the chip definitions of evil twins into separate ones which
correctly declare the respective attributes (the main problems are the erase
block sizes for the 0x20 opcode and hence my changes combine different
chips with partly different attributes apart from their names as long as the
erasers layout it the same). This forces the user to select the (right) chip
definition with the -c/--chip parameter and hence will break a number of
previously perfectly working environments.
0x2015 is used by and split to
- MX25L1605 (64kB sectors in 0x20 erases)
- MX25L1605A/MX25L1606E (4kB in 0x20 erases and an additional 0x52 opcode with 64kB blocks)
- MX25L1605D/MX25L1608D (4k sectors in 0x20 erases)
0x2016 is used by and split to
- MX25L3205/MX25L3205A (64kB 0x20)
- MX25L3205D/MX25L3208D (4kB 0x20)
- MX25L3206E (4k 0x20, 64k 0x52)
0x2017 is used by and split to
- MX25L6405/MX25L6405D (64k 0x20)
- MX25L6406E/MX25L6436E (4k 0x20)
- MX25L6445E (4k 0x20, 64k 0x52)
Bonus: add some minor details to MX25L1635D, MX25L1635E, MX25L3235D,
MX25L12805D.
Tested with MX25L3206E, MX25L64036E.
Corresponding to flashrom svn r1657.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This older (ST-branded) revision of M25P20 chip does not support RDID and
hence was not detected correctly. This patch adds a workaround similar
to M25P40-old.
Corresponding to flashrom svn r1652.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Update MX25L512 with references to and data about
MX25L512E, MX25V512, MX25V512C.
Update MX25L1005 with references to and data about
MX25L1005C, MX25L1006E.
Update MX25L2005 with references to and data about
MX25L2005C.
Update MX25L4005 with references to and data about
MX25L4005A, MX25L4005C.
Update MX25L8005 with references to and data about
MX25V8005.
Bonus: add chip IDs of MX25U1635E, MX25U3235E/F, MX25U6435E/F.
Corresponding to flashrom svn r1647.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds support for the following chips:
- AT25F512, AT25F512A, AT25F512B
- AT25F1024, AT25F1024A
- AT25F2048
- AT25F4096
Besides the definitions of the the chips in flashchips.c this includes
- a dedicated probing method (probe_spi_at25f)
- pretty printing methods (spi_prettyprint_status_register_at25f*), and
- unlocking methods (spi_disable_blockprotect_at25f*)
Corresponding to flashrom svn r1637.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This includes:
Bottom boot block:
* 16Mb/2MB:
QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8
* 32Mb/4MB:
QB25F320S33B8, QH25F320S33B8
* 64Mb/8MB:
QB25F640S33B8, QH25F640S33B8
Top boot block:
* 16Mb/2MB:
QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8
* 32Mb/4MB:
QB25F320S33T8, QH25F320S33T8
* 64Mb/8MB:
QB25F640S33T8, QH25F640S33T8
At least some seem to be marketed by other vendors (too?) but also with
Intel's vendor ID.
Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they
support also erasing the top/bottom 8 8kB blocks with opcode 0x40.
But since this command fails for all addresses outside those ranges,
it is not easily implemented with flashrom's current code base and
hence left out.
Corresponding to flashrom svn r1636.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks.
W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks.
W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks.
The W39F010 code was tested with a satasii programmer. The first write
attempt after an erase returned with verify failure, but the second
write attempt was succesful:
http://paste.flashrom.org/view.php?id=1418
Corresponding to flashrom svn r1620.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The 32Mb version has 1.8V and 3.0V versions, the smaller one 1.8V only
(or Numonyx/Micron forgot to publish it). Another difference is that the
16Mb chip has 32 kB subsectors (erase opcode 0x52). As long as there
are no funky configurations like for the 128Mb chips, we got the smaller
parts covered with this change.
Corresponding to flashrom svn r1615.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
