Add support for the Amontec JTAGkey2, see
http://www.amontec.com/jtagkey2.shtmlhttp://www.amontec.com/jtagkey.shtml.
This FTDI 2232H variant has an additional output enable, which will be
set to its "on" (L) when CS is pulled low. But it lacks a power supply
and you need an external 3.3V source.
The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It
should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I
only have a JTAGkey2 here for testing.
Add all FT2232H/FT4232H based programmers to the list printed with
flashrom -L
Corresponding to flashrom svn r1119.
Signed-off-by: Jörg Fischer <turboj@gmx.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Huge thanks go to Michael Karcher for reverse engineering the interface
and to Johannes Sjölund for testing the first iterations of my patch on
his hardware until it worked.
Thanks to the following testers of the patch:
* MCP61, 10de:03e0, LPC OK, ECS Geforce6100SM-M, Andrew Cleveland
* MCP61, 10de:03e0, LPC OK, Biostar NF520-A2 NF61D-A2, Vitaliy Buchynskyy
* MCP65, 10de:0441, SPI OK, MSI MS-7369 K9N Neo-F v2, Kjell Braden
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Wolfgang Schnitker
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Johannes Sjölund
* MCP65, 10de:0441, SPI OK, MSI MS-7369, Melchior Franz
* MCP78S, 10de:075c, SPI OK, Asus M3N78 PRO, Brad Rogers
* MCP78S, 10de:075c, SPI OK, Asus M3N78-VM, Marcel Partap
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Kimmo Vuorinen
* MCP78S, 10de:075c, SPI OK, Asus M4N78 PRO, Vikram Ambrose
* MCP79, 10de:0aad, SPI OK, Acer Aspire R3600, Andrew Morgan
* MCP79, 10de:0aae, LPC ??, Lenovo Ideapad S12 laptop, Christian Schmitt
* MCP79, 10de:0aae, SPI OK, Apple iMac9,1 Mac-F2218EA9, David "dledson"
flashrom will refuse to write/erase for safety reasons if MCP6x/MCP7x
SPI is detected.
Corresponding to flashrom svn r1113.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
