SiS 745 chipset + Winbond W83697HF and Winbond W49F002U flash. Probe, read,
erase and write all work.
Matching on "NB/SB" (they are integrated). Also mark SiS 745 chipset
as tested.
lspci/superiotool:
http://www.flashrom.org/pipermail/flashrom/2010-September/004705.html
Corresponding to flashrom svn r1158.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html
This goes the safe route of adding a match for the P4P800 that does not
match the P4P800-E Deluxe which is already in. It seems quite likely that
the whole P4P800 family could use the same board enable with one generic
board enable match, though.
This match uses host bridge + audio, because all other IDs match the
P4P800-E Deluxe board, as reported in
http://www.e-monkeys.de/Everest-Bericht.txt
(no user feedback, commit as "untested")
Corresponding to flashrom svn r1157.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html
matching SMBus + Audio, because SMBus is the only core device with
usable IDs.
Corresponding to flashrom svn r1156.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Marked as untested for now, as there was no response from the user.
Corresponding to flashrom svn r1155.
Signed-off-by: Sergey A Lichack <shadowpilot34@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Many thanks to Michael Karcher for reverse engineering this.
lspci/superio output:
http://www.flashrom.org/pipermail/flashrom/2010-August/004475.html
Corresponding to flashrom svn r1146.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
This patch changes the intel_piix4_gpo_set() function to always check
the GENCFG and XBCS registers for the availability of the
requested GPO line before raising/lowering it and fails otherwise. It
makes no attempt to bypass the values in these configuration
registers.
The old flashrom code did consider it safe to reprogram (multiplexed)
GPO:s 22-26 without checking the value of the controlling register
(GENCFG). I do not really know why.
I have tested this patch on an Asus P2B-N (needs GPO18 low) and MSI
MS-6163 Pro (needs GPO14 high).
The information for these registers are from the Intel "82371AB
PCI-TO-ISA / IDE XCELERATOR (PIIX4)" datasheet available here:
http://www.intel.com/design/intarch/datashts/29056201.pdf
Corresponding to flashrom svn r1142.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
- There are number of boards that have board-enables in board-enable.c but
have no corresponding entry in print.c (with or without URL doesn't matter)
and thus appear neither in the "flashrom -L" list of boards nor in the
wiki output. Fix this by adding entries for them in print.c.
- abit AN-M2
- abit KN8 Ultra
- ASUS A8Jm (laptop)
- ASUS A8N (might need changing to "A8N-SLI Deluxe", see
http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html)
- ASUS A8N-LA (Nagami-GL8E)
- ASUS P4B533-E
- ASUS P4S800-MX
- HP ProLiant DL165 G6
- IBASE MB899
- Intel SE440BX-2 (marked as non-working for now though, due to
http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html)
- MSI MS-6577 (Xenon)
- MSI MS-7207 (K8NGM2-L)
- Fix / amend a few board names:
- Add "ProLiant" name to the "DL145 G3" (and the new "DL165 G6"), we
use such "series" names for various other boards (e.g. "Vectra" etc)
and it also helps users googling for those names.
- HP "Vectra VL400 PC" should be "Vectra VL400" really, I'm pretty sure
the "PC" is not part of the board name but simply stands for
"personal computer". Same for "Vectra VL420 SFF PC".
- Change "ASUS A8JM" to "ASUS A8Jm" as per vendor website.
- Add comments for boards which may be listed with incorrect names,
I sent out clarification requests to the list, URLs listed as comment.
- Add "Xenon" HP name to the "MSI MS-6577" OEM board.
- Fix typo in "MS-7207 (K8N GM2-L)", should be "MS-7207 (K8NGM2-L)" as
per vendor website.
Corresponding to flashrom svn r1141.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Change the DMI string to only match this exact board (DMI "NAGAMI2L")
as only this one is tested.
Similar HP OEM boards might also work using this board-enable but that's
not sure and not tested. Two of those boards have DMI strings "NAGAMI"
and "NAGAMI2".
Corresponding to flashrom svn r1140.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004414.html
(URL added by Michael Karcher)
Corresponding to flashrom svn r1139.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
I had to use the USB controller in the board enable because all other
subsystem IDs are having vendor: Gigabyte but mostly copy the Intel
product IDs.
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004420.html
Corresponding to flashrom svn r1138.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Thomas Kalka <thomas.kalka@googlemail.com>
- Fix incorrect whitespace, indentation, and coding style in some places.
- Drop '/**' Doxygen comments, we don't use Doxygen. Even if we would use
it, the comments are useless as we don't have any Doxygen markup in there.
- Use consistent vendor name spelling as per current website (NVIDIA,
abit, GIGABYTE).
- Use consistent / common format for "Suited for:" lines in board_enable.c.
- Add some missing 'void's in functions taking no arguments.
- Add missing fullstops in sentences, remove them from non-sentences (lists).
Corresponding to flashrom svn r1134.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This was successfully tested by 'kai2343' on IRC.
Thanks to Michael Karcher for finding the board enable.
Corresponding to flashrom svn r1133.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Thanks to "Putlinuxonit" <putlinuxonit@gmail.com> for reporting
and testing.
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004309.html
Corresponding to flashrom svn r1131.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
To be safe, the onboard video of the nView edition of this board has
been included in the match. If other NF-M2 editions have the same board
enable, the match should be broadened
lspci/superiotool
http://www.coreboot.org/pipermail/flashrom/2010-April/002909.html
No success report, thus committed as untested.
Corresponding to flashrom svn r1109.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The SATA controller matched in the board enable is not always present
with that ID (that's the 2-port ICH9 SATA IDE controller), but (depending
on board revision/edition or BIOS settings an ICH9 SATA RAID controller
appears instead. This patches matches on the SMBus function in the
south bridge instead of the SATA controller.
Non-working board reported by: Gunter Keilholz <gunter.keilholz@googlemail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003591.html
Corresponding to flashrom svn r1108.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html
No success report, so committed as untested.
Corresponding to flashrom svn r1106.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by: Anders Jenbo <anders@jenbo.dk>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html
no success report, so committed as untested.
Corresponding to flashrom svn r1105.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No response from reporter - committed as "untested".
Corresponding to flashrom svn r1101.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Needed on the original Xbox running Xebian and a few other ancient
systems.
Corresponding to flashrom svn r1088.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Alec Wright <alecjw@member.fsf.org>
Autodetect the ITE IT8705 Super I/O and enable flash writes if it
performs LPC->Parallel translation. Remove board enables which triggered
the IT8705 write enable manually. Change the IT87 SPI special case to
cover IT87 LPC->SPI and LPC->Parallel translation.
Corresponding to flashrom svn r1073.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Syntax SV266A.
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested on Shuttle AK38N, all operations work fine.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
r1063 had several issues: The PCI IDs for this board are copy/pasted from
the A8N and plain wrong for this board and the board enable is marked as
tested although it isn't. Finally the board description was slightly
wrong and the URL missing.
Corresponding to flashrom svn r1071.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Change the match for the HP DL145 G3 to avoid matching on the DL165 G6.
Corresponding to flashrom svn r1065.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1063.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
This patch unifies the code for different Winbond W83627-family chips,
to be applied before I add another W83627 GPIO raise function.
After the Ack I added the check for unimplemented GPIO ports, but still
dared to reuse the ack.
Corresponding to flashrom svn r1062.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Fix compiler error (bad forward port in r1040).
Corresponding to flashrom svn r1042.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Reporter/owner of that board: oscar <oshikore@gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html
Corresponding to flashrom svn r1040.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Every board-enable function is passed a 'const char *name' (board name)
which is totally useless as the board name was already printed by flashrom
at that point. Also, 95% or so of the board-enables don't use the
parameter anyway. So, drop it.
Corresponding to flashrom svn r1037.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.
Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
At least it's addressed as 'Pro' in the list of boards, which requires
board_enable.
See also:
http://www.flashrom.org/pipermail/flashrom/2009-July/000003.html
Corresponding to flashrom svn r1015.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Corresponding to flashrom svn r1010.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Marc Bertens <mbertens@xs4all.nl>
Read class info manually and store it in a separate variable.
Corresponding to flashrom svn r1004.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r993.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Tom Brand <worntreads@sbcglobal.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Corresponding to flashrom svn r985.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
