mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-26 22:52:34 +02:00

This is a SPI hardware interface with a display (https://spidriver.com/), connected as an FT230X USB serial device at a fixed baud rate of 460800. Firmware: https://github.com/jamesbowman/spidriver Protocol: https://github.com/jamesbowman/spidriver/blob/master/protocol.md Most of the implementation is copied from the Bus Pirate programmer. Tested with a SPIDriver v2 by reading FM25Q128A flash memory on Linux. Change-Id: I07b23c1146d4ad3606b54a1e8dc8030cf4ebf57b Signed-off-by: Simon Arlott <flashrom@octiron.net> Reviewed-on: https://review.coreboot.org/c/flashrom/+/86411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Marheine <pmarheine@chromium.org> Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
220 lines
5.0 KiB
C
220 lines
5.0 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright 2025 Simon Arlott
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "lifecycle.h"
|
|
|
|
#if CONFIG_SPIDRIVER == 1
|
|
#define SPIDRIVER_TEST_DEBUG 0
|
|
|
|
struct spidriver_state {
|
|
// most recent command
|
|
unsigned char state;
|
|
|
|
unsigned char input[256]; // for read() responses
|
|
size_t in_len; // available data to read
|
|
size_t in_pos; // remaining SPI read count
|
|
unsigned char output[256]; // incoming SPI writes
|
|
size_t out_pos; // SPI write position in buffer
|
|
size_t out_len; // remaining SPI write count
|
|
|
|
// chip select
|
|
bool cs;
|
|
size_t cs_count;
|
|
|
|
// probe detected
|
|
bool probe;
|
|
size_t cs_probe;
|
|
};
|
|
|
|
static int spidriver_read(void *state, int fd, void *buf, size_t sz)
|
|
{
|
|
struct spidriver_state *ts = state;
|
|
|
|
assert_int_equal(fd, MOCK_FD);
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("read: %zu\n", sz);
|
|
|
|
sz = min(sz, ts->in_len);
|
|
|
|
if (sz > 0) {
|
|
memcpy(buf, ts->input, sz);
|
|
memmove(ts->input, &ts->input[sz], sizeof(ts->input) - sz);
|
|
ts->in_len = 0;
|
|
return sz;
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static int spidriver_write(void *state, int fd, const void *buf, size_t sz)
|
|
{
|
|
struct spidriver_state *ts = state;
|
|
|
|
assert_int_equal(fd, MOCK_FD);
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("write: %zu\n", sz);
|
|
|
|
for (size_t i = 0; i < sz; i++) {
|
|
unsigned char c = ((const char *)buf)[i];
|
|
bool first = ts->state == 0;
|
|
|
|
if (first)
|
|
ts->state = c;
|
|
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("c=%02X first=%d state=%02X\n", c, first, ts->state);
|
|
|
|
switch (ts->state) {
|
|
case '?':
|
|
assert_int_equal(ts->in_len, 0);
|
|
snprintf((char *)ts->input, sizeof(ts->input),
|
|
"[spidriver2 AAAAAAAA 000000002 5.190 000"
|
|
" 21.9 1 1 1 ffff 0 ]");
|
|
ts->in_len = 80;
|
|
ts->state = 0;
|
|
break;
|
|
|
|
case 0:
|
|
break;
|
|
|
|
case 'm':
|
|
case 'a':
|
|
case 'b':
|
|
if (!first)
|
|
ts->state = 0;
|
|
break;
|
|
|
|
case 's':
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("select\n");
|
|
ts->cs = true;
|
|
ts->cs_count++;
|
|
ts->state = 0;
|
|
break;
|
|
|
|
case 'u':
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("unselect\n");
|
|
ts->cs = false;
|
|
ts->state = 0;
|
|
break;
|
|
|
|
case 'e':
|
|
if (!first) {
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("echo %02X\n", c);
|
|
|
|
assert_int_equal(ts->in_len, 0);
|
|
snprintf((char *)ts->input, sizeof(ts->input), "%c", c);
|
|
ts->in_len = 1;
|
|
ts->state = 0;
|
|
}
|
|
break;
|
|
|
|
case 0x80 ... 0xbf:
|
|
if (first) {
|
|
ts->in_pos = c - 0x80 + 1;
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("SPI read begin %zu\n", ts->in_pos);
|
|
|
|
if (ts->probe) {
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("probe response\n");
|
|
|
|
assert_int_equal(ts->in_pos, 3);
|
|
assert_true(ts->cs);
|
|
// Must not have lowered CS after write
|
|
assert_int_equal(ts->cs_count, ts->cs_probe);
|
|
|
|
assert_int_equal(ts->in_len, 0);
|
|
ts->input[0] = 0xEF; /* WINBOND_NEX_ID */
|
|
ts->input[1] = 0x40; /* WINBOND_NEX_W25Q128_V left byte */
|
|
ts->input[2] = 0x18; /* WINBOND_NEX_W25Q128_V right byte */
|
|
} else {
|
|
assert_int_equal(ts->in_len, 0);
|
|
memset(ts->input, 0, ts->in_pos);
|
|
}
|
|
continue;
|
|
} else if (ts->in_pos > 0) {
|
|
assert_int_equal(c, 0);
|
|
ts->in_pos--;
|
|
ts->in_len++;
|
|
}
|
|
|
|
if (ts->in_pos == 0) {
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("SPI read finished\n");
|
|
ts->probe = false;
|
|
ts->state = 0;
|
|
}
|
|
break;
|
|
|
|
case 0xc0 ... 0xff:
|
|
if (first) {
|
|
assert_int_equal(ts->out_len, 0);
|
|
ts->out_len = c - 0xc0 + 1;
|
|
ts->out_pos = 0;
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("SPI write begin %zu\n", ts->out_len);
|
|
continue;
|
|
} else if (ts->out_len > 0) {
|
|
ts->output[ts->out_pos++] = c;
|
|
ts->out_len--;
|
|
}
|
|
|
|
if (ts->out_len == 0) {
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("SPI write finished\n");
|
|
assert_true(ts->cs);
|
|
if (ts->out_pos == 1 && ts->output[0] == JEDEC_RDID) {
|
|
if (SPIDRIVER_TEST_DEBUG)
|
|
printf("probe detected\n");
|
|
ts->probe = true;
|
|
ts->cs_probe = ts->cs_count;
|
|
}
|
|
ts->state = 0;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
fail_msg("Unsupported command 0x%02X", ts->state);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return sz;
|
|
}
|
|
|
|
void spidriver_probe_lifecycle_test_success(void **state)
|
|
{
|
|
struct spidriver_state ts = {};
|
|
struct io_mock_fallback_open_state spidriver_fallback_open_state = {
|
|
.noc = 0,
|
|
.paths = { "/dev/null", NULL },
|
|
.flags = { O_RDWR | O_NOCTTY | O_NDELAY },
|
|
};
|
|
const struct io_mock spidriver_io = {
|
|
.state = &ts,
|
|
.iom_read = spidriver_read,
|
|
.iom_write = spidriver_write,
|
|
.fallback_open_state = &spidriver_fallback_open_state,
|
|
};
|
|
|
|
run_probe_lifecycle(state, &spidriver_io, &programmer_spidriver, "dev=/dev/null", "W25Q128.V");
|
|
}
|
|
#else
|
|
SKIP_TEST(spidriver_probe_lifecycle_test_success)
|
|
#endif /* CONFIG_SPIDRIVER */
|