mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-27 15:12:36 +02:00
13a2ef6cbd
This adds support for the Parade lspcon usb-c to HDMI protocol translater part that is i2c-controlled. The support allows the host to reach the SPI ROM that hangs off the part where it stores its firmware. Usage is as follows: flashrom -p lspcon_i2c_spi:bus=X where X is the bus number. BUG=b:148746232 BRANCH=none TEST=tested with following commands, read/write/erase works good. flashrom -p lspcon_i2c_spi:bus=7 -r /tmp/foo; flashrom -p lspcon_i2c_spi:bus=7 -E; flashrom -p lspcon_i2c_spi:bus=7 -w /tmp/foo; Change-Id: I039e683252cfaf1ffef8694a3e8081b1b6b944f7 Signed-off-by: Shiyu Sun <sshiyu@chromium.org> Reviewed-on: https://review.coreboot.org/c/flashrom/+/39687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
39 lines
3.5 KiB
Meson
39 lines
3.5 KiB
Meson
option('pciutils', type : 'boolean', value : true, description : 'use pciutils')
|
|
option('usb', type : 'boolean', value : true, description : 'use libusb1')
|
|
|
|
option('config_atahpt', type : 'boolean', value : false, description : 'Highpoint (HPT) ATA/RAID controllers')
|
|
option('config_atapromise', type : 'boolean', value : false, description : 'Promise ATA controller')
|
|
option('config_atavia', type : 'boolean', value : true, description : 'VIA VT6421A LPC memory')
|
|
option('config_buspirate_spi', type : 'boolean', value : true, description : 'Bus Pirate SPI')
|
|
option('config_ch341a_spi', type : 'boolean', value : true, description : 'Winchiphead CH341A')
|
|
option('config_dediprog', type : 'boolean', value : true, description : 'Dediprog SF100')
|
|
option('config_developerbox_spi', type : 'boolean', value : true, description : 'Developerbox emergency recovery')
|
|
option('config_digilent_spi', type : 'boolean', value : true, description : 'Digilent Development board JTAG')
|
|
option('config_drkaiser', type : 'boolean', value : true, description : 'Dr. Kaiser')
|
|
option('config_dummy', type : 'boolean', value : true, description : 'dummy tracing')
|
|
option('config_ft2232_spi', type : 'boolean', value : true, description : 'FT2232 SPI dongles')
|
|
option('config_gfxnvidia', type : 'boolean', value : true, description : 'NVIDIA graphics cards')
|
|
option('config_raiden', type : 'boolean', value : true, description : 'ChromiumOS Servo DUT debug board')
|
|
option('config_internal', type : 'boolean', value : true, description : 'internal/onboard')
|
|
option('config_internal_dmi', type : 'boolean', value : true, description : 'Use internal DMI parser')
|
|
option('config_it8212', type : 'boolean', value : true, description : 'ITE IT8212F PATA')
|
|
option('config_linux_mtd', type : 'boolean', value : true, description : 'Linux MTD interfaces')
|
|
option('config_linux_spi', type : 'boolean', value : true, description : 'Linux spidev interfaces')
|
|
option('config_mstarddc_spi', type : 'boolean', value : false, description : 'MSTAR DDC support')
|
|
option('config_nic3com', type : 'boolean', value : true, description : '3Com NICs')
|
|
option('config_nicintel_eeprom', type : 'boolean', value : true, description : 'EEPROM on Intel NICs')
|
|
option('config_nicintel_spi', type : 'boolean', value : true, description : 'SPI on Intel NICs')
|
|
option('config_nicintel', type : 'boolean', value : true, description : 'Intel NICs')
|
|
option('config_nicnatsemi', type : 'boolean', value : false, description : 'National Semiconductor NICs')
|
|
option('config_nicrealtek', type : 'boolean', value : true, description : 'Realtek NICs')
|
|
option('config_ogp_spi', type : 'boolean', value : true, description : 'SPI on OGP cards')
|
|
option('config_pickit2_spi', type : 'boolean', value : true, description : 'PICkit2 SPI')
|
|
option('config_pony_spi', type : 'boolean', value : true, description : 'PonyProg2000 SPI')
|
|
option('config_rayer_spi', type : 'boolean', value : true, description : 'RayeR SPIPGM')
|
|
option('config_satamv', type : 'boolean', value : true, description : 'Marvell SATA controllers')
|
|
option('config_satasii', type : 'boolean', value : true, description : 'SiI SATA controllers')
|
|
option('config_serprog', type : 'boolean', value : true, description : 'serprog')
|
|
option('config_usbblaster_spi', type : 'boolean', value : true, description : 'Altera USB-Blaster dongles')
|
|
option('config_stlinkv3_spi', type : 'boolean', value : true, description : 'STMicroelectronics STLINK-V3')
|
|
option('config_lspcon_i2c_spi', type : 'boolean', value : false, description : 'Parade lspcon USB-C to HDMI protocol translator')
|