mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-28 07:23:43 +02:00

Use the correct reset sequence for 82802AB. Detailed explanation: The reset sequence before ID reading was correct, so ID always worked. But the reset sequence after ID reading was a copy-paste leftover from probe_jedec and didn't have any effect. I dug up flash_and_burn from the freebios-v1 tree and found out that 82802ab.c was indeed a copy of jedec.c with lots of experimental unannotated #if 0 and #if 1. About the wait_82802ab change: Before the patch, wait_82802ab entered read status mode, switched to ID mode, then tried an incorrect and unsupported JEDEC command to exit ID mode. Nobody ever saw that this failed because all subsequent function calls had the correct reset sequence at the beginning. With the patch, wait_82802ab enters read status mode, then switches back to read mode with the official reset command. Corresponding to flashrom svn r717. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
191 lines
4.6 KiB
C
191 lines
4.6 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright (C) 2008 coresystems GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include "flash.h"
|
|
|
|
int probe_winbond_fwhub(struct flashchip *flash)
|
|
{
|
|
int result = probe_jedec(flash);
|
|
|
|
if (!result)
|
|
return result;
|
|
|
|
map_flash_registers(flash);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int unlock_block_winbond_fwhub(struct flashchip *flash, int offset)
|
|
{
|
|
chipaddr wrprotect = flash->virtual_registers + offset + 2;
|
|
uint8_t locking;
|
|
|
|
printf_debug("Trying to unlock block @0x%08x = 0x%02x\n", offset,
|
|
chip_readb(wrprotect));
|
|
|
|
locking = chip_readb(wrprotect);
|
|
switch (locking & 0x7) {
|
|
case 0:
|
|
printf_debug("Full Access.\n");
|
|
return 0;
|
|
case 1:
|
|
printf_debug("Write Lock (Default State).\n");
|
|
chip_writeb(0, wrprotect);
|
|
return 0;
|
|
case 2:
|
|
printf_debug("Locked Open (Full Access, Lock Down).\n");
|
|
return 0;
|
|
case 3:
|
|
fprintf(stderr, "Error: Write Lock, Locked Down.\n");
|
|
return -1;
|
|
case 4:
|
|
printf_debug("Read Lock.\n");
|
|
chip_writeb(0, wrprotect);
|
|
return 0;
|
|
case 5:
|
|
printf_debug("Read/Write Lock.\n");
|
|
chip_writeb(0, wrprotect);
|
|
return 0;
|
|
case 6:
|
|
fprintf(stderr, "Error: Read Lock, Locked Down.\n");
|
|
return -1;
|
|
case 7:
|
|
fprintf(stderr, "Error: Read/Write Lock, Locked Down.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* We will never reach this point, but GCC doesn't know */
|
|
return -1;
|
|
}
|
|
|
|
int unlock_winbond_fwhub(struct flashchip *flash)
|
|
{
|
|
int i, total_size = flash->total_size * 1024;
|
|
chipaddr bios = flash->virtual_memory;
|
|
uint8_t locking;
|
|
|
|
/* Are there any hardware restrictions that we can't overcome?
|
|
* If flashrom fail here, someone's got to check all those GPIOs.
|
|
*/
|
|
|
|
/* Product Identification Entry */
|
|
chip_writeb(0xAA, bios + 0x5555);
|
|
chip_writeb(0x55, bios + 0x2AAA);
|
|
chip_writeb(0x90, bios + 0x5555);
|
|
programmer_delay(10);
|
|
|
|
/* Read Hardware Lock Bits */
|
|
locking = chip_readb(bios + 0xffff2);
|
|
|
|
/* Product Identification Exit */
|
|
chip_writeb(0xAA, bios + 0x5555);
|
|
chip_writeb(0x55, bios + 0x2AAA);
|
|
chip_writeb(0xF0, bios + 0x5555);
|
|
programmer_delay(10);
|
|
|
|
printf_debug("Lockout bits:\n");
|
|
|
|
if (locking & (1 << 2))
|
|
fprintf(stderr, "Error: hardware bootblock locking (#TBL).\n");
|
|
else
|
|
printf_debug("No hardware bootblock locking (good!)\n");
|
|
|
|
if (locking & (1 << 3))
|
|
fprintf(stderr, "Error: hardware block locking (#WP).\n");
|
|
else
|
|
printf_debug("No hardware block locking (good!)\n");
|
|
|
|
if (locking & ((1 << 2) | (1 << 3)))
|
|
return -1;
|
|
|
|
/* Unlock the complete chip */
|
|
for (i = 0; i < total_size; i += flash->page_size)
|
|
if (unlock_block_winbond_fwhub(flash, i))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int erase_sector_winbond_fwhub(struct flashchip *flash,
|
|
unsigned int sector)
|
|
{
|
|
chipaddr bios = flash->virtual_memory;
|
|
/* Remember: too much sleep can waste your day. */
|
|
|
|
printf("0x%08x\b\b\b\b\b\b\b\b\b\b", sector);
|
|
|
|
/* Sector Erase */
|
|
chip_writeb(0xAA, bios + 0x5555);
|
|
chip_writeb(0x55, bios + 0x2AAA);
|
|
chip_writeb(0x80, bios + 0x5555);
|
|
|
|
chip_writeb(0xAA, bios + 0x5555);
|
|
chip_writeb(0x55, bios + 0x2AAA);
|
|
chip_writeb(0x30, bios + sector);
|
|
|
|
/* wait for Toggle bit ready */
|
|
toggle_ready_jedec(bios);
|
|
|
|
if (check_erased_range(flash, sector, flash->page_size)) {
|
|
fprintf(stderr, "ERASE FAILED!\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int erase_winbond_fwhub(struct flashchip *flash)
|
|
{
|
|
int i, total_size = flash->total_size * 1024;
|
|
|
|
unlock_winbond_fwhub(flash);
|
|
|
|
printf("Erasing: ");
|
|
|
|
for (i = 0; i < total_size; i += flash->page_size) {
|
|
if (erase_sector_winbond_fwhub(flash, i)) {
|
|
fprintf(stderr, "ERASE FAILED!\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int write_winbond_fwhub(struct flashchip *flash, uint8_t *buf)
|
|
{
|
|
int i;
|
|
int total_size = flash->total_size * 1024;
|
|
chipaddr bios = flash->virtual_memory;
|
|
|
|
if (erase_winbond_fwhub(flash))
|
|
return -1;
|
|
|
|
printf("Programming: ");
|
|
for (i = 0; i < total_size; i += flash->page_size) {
|
|
printf("0x%08x\b\b\b\b\b\b\b\b\b\b", i);
|
|
write_sector_jedec(bios, buf + i, bios + i, flash->page_size);
|
|
}
|
|
printf("\n");
|
|
|
|
return 0;
|
|
}
|