1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 07:02:34 +02:00
flashrom/sst_fwhub.c
Stefan Reinauer e60fd35182 Instead of checking the first byte only, the whole part is checked now
This

Corresponding to flashrom svn r71 and coreboot v2 svn r2494.

will detect any improper erase, closes #31
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
2006-11-07 13:48:46 +00:00

119 lines
3.2 KiB
C

/*
* adapted from the Intel FW hub stuff for 82802ax parts.
*
*
* Copyright 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <errno.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/io.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include "flash.h"
#include "jedec.h"
#include "sst_fwhub.h"
// I need that Berkeley bit-map printer
void print_sst_fwhub_status(uint8_t status)
{
printf("%s", status & 0x80 ? "Ready:" : "Busy:");
printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
}
/* probe_jedec works fine for probing */
int probe_sst_fwhub(struct flashchip *flash)
{
volatile uint8_t *bios;
size_t size = flash->total_size * 1024;
if (probe_jedec(flash) == 0)
return 0;
bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED,
flash->fd_mem, (off_t) (0xFFFFFFFF - 0x400000 - size + 1));
if (bios == MAP_FAILED) {
// it's this part but we can't map it ...
perror("Error MMAP /dev/mem");
exit(1);
}
flash->virt_addr_2 = bios;
return 1;
}
int erase_sst_fwhub_block(struct flashchip *flash, int offset)
{
volatile uint8_t *wrprotect = flash->virt_addr_2 + offset + 2;
// clear write protect
*(wrprotect) = 0;
erase_block_jedec(flash->virt_addr, offset);
toggle_ready_jedec(flash->virt_addr);
return (0);
}
int erase_sst_fwhub(struct flashchip *flash)
{
int i;
unsigned int total_size = flash->total_size * 1024;
for (i = 0; i < total_size; i += flash->page_size)
erase_sst_fwhub_block(flash, i);
return (0);
}
int write_sst_fwhub(struct flashchip *flash, uint8_t *buf)
{
int i;
int total_size = flash->total_size * 1024, page_size =
flash->page_size;
volatile uint8_t *bios = flash->virt_addr;
// FIXME: We want block wide erase instead of ironing the whole chip
erase_sst_fwhub(flash);
// dumb check if erase was successful.
for (i=0; i < total_size; i++) {
if (bios[i] != 0xff) {
printf("ERASE FAILED\n");
return -1;
}
}
printf("Programming Page: ");
for (i = 0; i < total_size / page_size; i++) {
printf("%04d at address: 0x%08x", i, i * page_size);
write_sector_jedec(bios, buf + i * page_size,
bios + i * page_size, page_size);
printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
}
printf("\n");
return (0);
}