1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-28 15:33:42 +02:00
flashrom/sharplhf00l04.c
Michael Karcher 972cec282c Refine support for the JEDEC Software Data Protection
This patch removes the extremely dangerous unprotect_jedec function
which is not used at all within flashrom code, and renames the
misleadingly named protect_jedec function to start_program_jedec.

Calls to protect_jedec after flashing are removed, because a) on LPC
chips, the command sent by protoct_jedec is not even in the datasheet
and b) on parallel chips, the block write command issued before already
contained the software protection sequence, so software protection is
definitely enabled.

This patch also removes two clones of protect_jedec

Background: JEDEC Software Data Protection started as an optional
feature, which was disabled on the first single-voltage-flash chips.
The software data protection is the need to prefix a write with a magic
"write enable" command, while without write protection every write
access into the chip's address space modifies flash content. This magic
write enable command also tells the flash chip that the programmer
obviously support sending write-enable commands and turns off the "any
write modifies flash content" mode. There also exist a two-command (6
writes) sequence that disables Software Data Protection completey, which
should only ever be used to prepare updating with a device that can't
handle software data protection.

Corresponding to flashrom svn r783.

Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
2009-11-26 14:50:52 +00:00

185 lines
4.8 KiB
C

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdlib.h>
#include "flash.h"
// I need that Berkeley bit-map printer
void print_lhf00l04_status(uint8_t status)
{
printf("%s", status & 0x80 ? "Ready:" : "Busy:");
printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
}
int probe_lhf00l04(struct flashchip *flash)
{
chipaddr bios = flash->virtual_memory;
uint8_t id1, id2;
#if 0
/* Enter ID mode */
chip_writeb(0xAA, bios + 0x5555);
chip_writeb(0x55, bios + 0x2AAA);
chip_writeb(0x90, bios + 0x5555);
#endif
chip_writeb(0xff, bios);
programmer_delay(10);
chip_writeb(0x90, bios);
programmer_delay(10);
id1 = chip_readb(bios);
id2 = chip_readb(bios + 0x01);
/* Leave ID mode */
chip_writeb(0xAA, bios + 0x5555);
chip_writeb(0x55, bios + 0x2AAA);
chip_writeb(0xF0, bios + 0x5555);
programmer_delay(10);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 != flash->manufacture_id || id2 != flash->model_id)
return 0;
map_flash_registers(flash);
return 1;
}
uint8_t wait_lhf00l04(chipaddr bios)
{
uint8_t status;
chip_writeb(0x70, bios);
if ((chip_readb(bios) & 0x80) == 0) { // it's busy
while ((chip_readb(bios) & 0x80) == 0) ;
}
status = chip_readb(bios);
// put another command to get out of status register mode.
chip_writeb(0x90, bios);
programmer_delay(10);
chip_readb(bios); // vendor ID
chip_readb(bios + 0x01); // device ID
// this is needed to jam it out of "read id" mode
chip_writeb(0xAA, bios + 0x5555);
chip_writeb(0x55, bios + 0x2AAA);
chip_writeb(0xF0, bios + 0x5555);
return status;
}
int erase_lhf00l04_block(struct flashchip *flash, int offset)
{
chipaddr bios = flash->virtual_memory + offset;
chipaddr wrprotect = flash->virtual_registers + offset + 2;
uint8_t status;
// clear status register
chip_writeb(0x50, bios);
printf("Erase at 0x%lx\n", bios);
status = wait_lhf00l04(flash->virtual_memory);
print_lhf00l04_status(status);
// clear write protect
printf("write protect is at 0x%lx\n", (wrprotect));
printf("write protect is 0x%x\n", chip_readb(wrprotect));
chip_writeb(0, wrprotect);
printf("write protect is 0x%x\n", chip_readb(wrprotect));
// now start it
chip_writeb(0x20, bios);
chip_writeb(0xd0, bios);
programmer_delay(10);
// now let's see what the register is
status = wait_lhf00l04(flash->virtual_memory);
print_lhf00l04_status(status);
printf("DONE BLOCK 0x%x\n", offset);
if (check_erased_range(flash, offset, flash->page_size)) {
fprintf(stderr, "ERASE FAILED!\n");
return -1;
}
return 0;
}
int erase_lhf00l04(struct flashchip *flash)
{
int i;
unsigned int total_size = flash->total_size * 1024;
printf("total_size is %d; flash->page_size is %d\n",
total_size, flash->page_size);
for (i = 0; i < total_size; i += flash->page_size)
if (erase_lhf00l04_block(flash, i)) {
fprintf(stderr, "ERASE FAILED!\n");
return -1;
}
printf("DONE ERASE\n");
return 0;
}
void write_page_lhf00l04(chipaddr bios, uint8_t *src,
chipaddr dst, int page_size)
{
int i;
for (i = 0; i < page_size; i++) {
/* transfer data from source to destination */
chip_writeb(0x40, dst);
chip_writeb(*src++, dst++);
wait_lhf00l04(bios);
}
}
int write_lhf00l04(struct flashchip *flash, uint8_t *buf)
{
int i;
int total_size = flash->total_size * 1024;
int page_size = flash->page_size;
chipaddr bios = flash->virtual_memory;
if (erase_lhf00l04(flash)) {
fprintf(stderr, "ERASE FAILED!\n");
return -1;
}
printf("Programming page: ");
for (i = 0; i < total_size / page_size; i++) {
printf("%04d at address: 0x%08x", i, i * page_size);
write_page_lhf00l04(bios, buf + i * page_size,
bios + i * page_size, page_size);
printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
}
printf("\n");
return 0;
}