openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-09-29 15:54:56 +02:00
Code Issues Releases Wiki Activity
Files
45fc49e99b56547a3023653af64b89117d7ac122
flashrom/flashchips/micron_numonyx_st.c
Antonio Vázquez 45fc49e99b flashchips: Use SPDX in headers 
Change-Id: I13f1a33de0fbc9ffd7fb24207be0dfd3f04c0bbf
Signed-off-by: Antonio Vázquez <antoniovazquezblanco@gmail.com>
Signed-off-by: Anastasia Klimchuk <aklm@flashrom.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/89265
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2025-09-28 08:25:39 +00:00

1351 lines
37 KiB
C
Raw Blame History

/*
* This file is part of the flashrom project.
*
* SPDX-License-Identifier: GPL-2.0-or-later
* SPDX-FileCopyrightText: 2000 Silicon Integrated System Corporation
* SPDX-FileCopyrightText: 2004 Tyan Corp
* SPDX-FileCopyrightText: 2005-2008 coresystems GmbH <stepan@openbios.org>
* SPDX-FileCopyrightText: 2006-2009 Carl-Daniel Hailfinger
* SPDX-FileCopyrightText: 2009 Sean Nelson <audiohacked@gmail.com>
* SPDX-FileCopyrightText: 2025 Antonio Vázquez Blanco <antoniovazquezblanco@gmail.com>
*/
/* The ST M25P05 is a bit of a problem. It has the same ID as the
* ST M25P05-A in RES mode, but supports only 128 byte writes instead
* of 256 byte writes. We rely heavily on the fact that PROBE_SPI_RES1
* only is successful if RDID does not work.
*/
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P05",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P05_RES,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RES1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE1, /* 128 */
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P05-A",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P05A,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
/* The ST M25P10 has the same problem as the M25P05. */
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P10",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P10_RES,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RES1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE1, /* 128 */
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P10-A",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P10A,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P128",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P128,
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST", /* Numonyx */
.name = "M25P20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP1_SRWD,
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P20-old",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P20_RES,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RES1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP1_SRWD,
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P32",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P32,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST", /* Numonyx */
.name = "M25P40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P40-old",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P40_RES,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RES1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P64",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P64,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP3_SRWD, /* TODO: check */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP3_SRWD,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE10",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_PLAIN, /* TODO: improve */
.unlock = SPI_DISABLE_BLOCKPROTECT,
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX16,
.total_size = 2048,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 512 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2300, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX32",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX32,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PRE,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 1024 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX64",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX64,
.total_size = 8192,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 2048 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX80,
.total_size = 1024,
.page_size = 256,
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 256 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_BP2_SRWD, /* bit5: T/B */
.unlock = SPI_DISABLE_BLOCKPROTECT_BP2_SRWD, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256,
.read = SPI_CHIP_READ,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE10",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 512} },
.block_erase = SPI_BLOCK_ERASE_DB,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_D8,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
.unlock = NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
.write = SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 8192} },
.block_erase = SPI_BLOCK_ERASE_DB,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_D8,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
.unlock = NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
.write = SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 1024} },
.block_erase = SPI_BLOCK_ERASE_DB,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_D8,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
.unlock = NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
.write = SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE40,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 2048} },
.block_erase = SPI_BLOCK_ERASE_DB,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = SPI_BLOCK_ERASE_D8,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
.unlock = NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
.write = SPI_CHIP_WRITE256, /* Page write supported (similar to PP but allows 0->1 changes) */
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 4096} },
.block_erase = SPI_BLOCK_ERASE_DB,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = SPI_BLOCK_ERASE_D8,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_DEFAULT_WELWIP,
.unlock = NO_BLOCKPROTECT_FUNC, /* #WP pin write-protects lower 64kB. */
.write = SPI_CHIP_WRITE256, /* Page write (similar to PP but allows 0->1 changes) */
.read = SPI_CHIP_READ, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q00A..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q00A__1G,
.total_size = 131072,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32768} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 32768} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 2048} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 2048} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_C4,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q00A..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q00A__3G,
.total_size = 131072,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32768} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 32768} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 2048} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 2048} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 4} },
.block_erase = SPI_BLOCK_ERASE_C4,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q016",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q016__1E,
.total_size = 2048,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q032..1E",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q032__1E,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
.reg_bits =
{
/*
* There is also a volatile lock register per 64KiB sector, which is not
* mutually exclusive with BP-based protection.
*/
.srp = {STATUS1, 7, RW},
.bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
.tb = {STATUS1, 5, RW},
},
.decode_range = DECODE_RANGE_SPI25,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q032..3E",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q032__3E,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
.reg_bits =
{
/*
* There is also a volatile lock register per 64KiB sector, which is not
* mutually exclusive with BP-based protection.
*/
.srp = {STATUS1, 7, RW},
.bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
.tb = {STATUS1, 5, RW},
},
.decode_range = DECODE_RANGE_SPI25,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q064__1E,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
.reg_bits =
{
/*
* There is also a volatile lock register per 64KiB sector, which is not
* mutually exclusive with BP-based protection.
*/
.srp = {STATUS1, 7, RW},
.bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 6, RW}},
.tb = {STATUS1, 5, RW},
},
.decode_range = DECODE_RANGE_SPI25,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q064__3E,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
.reg_bits =
{
/*
* There is also a volatile lock register per 64KiB sector, which is not
* mutually exclusive with BP-based protection.
*/
.srp = {STATUS1, 7, RW},
.bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 6, RW}},
.tb = {STATUS1, 5, RW},
},
.decode_range = DECODE_RANGE_SPI25,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q128__1E,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {16384 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q128__3E,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096 } },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {16384 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q256..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q256__1E,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q256..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q256__3E,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 1} },
.block_erase = SPI_BLOCK_ERASE_C7,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q512..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q512__1G,
.total_size = 65536,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_C4,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q512..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q512__3G,
.total_size = 65536,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_OK_PREW,
.probe = PROBE_SPI_RDID,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = SPI_BLOCK_ERASE_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = SPI_BLOCK_ERASE_20,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_DC,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = SPI_BLOCK_ERASE_D8,
}, {
.eraseblocks = { {32768 * 1024, 2} },
.block_erase = SPI_BLOCK_ERASE_C4,
}
},
.printlock = SPI_PRETTYPRINT_STATUS_REGISTER_N25Q, /* TODO: config, lock, flag regs */
.unlock = SPI_DISABLE_BLOCKPROTECT_N25Q, /* TODO: per 64kB sector lock registers */
.write = SPI_CHIP_WRITE256, /* Multi I/O supported */
.read = SPI_CHIP_READ, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
Reference in New Issue View Git Blame Copy Permalink