openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 15:12:36 +02:00
Code Issues Releases Wiki Activity
flashrom/chipset_enable.c
Carl-Daniel Hailfinger 797a8346cf Add support for Intel 3400 series / 5 series chipset 
Found in Intel document 322170 (Intel 5 Series Chipset and Intel 3400
Series Chipset Specification Update).
According to http://pciids.sourceforge.net/ we probably should match all
IDs from 0x3b00-0x3b1f, but so far I didn't find an Intel doc saying the
same.
If anybody has contacts at Intel and can check, I'd be happy to add the
rest of the IDs.

Corresponding to flashrom svn r784.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
2009-11-26 16:51:39 +00:00

1235 lines
37 KiB
C
Raw Blame History

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
* Copyright (C) 2005-2009 coresystems GmbH
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the chipset specific flash enables.
*/
#define _LARGEFILE64_SOURCE
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "flash.h"
unsigned long flashbase = 0;
/**
* flashrom defaults to Parallel/LPC/FWH flash devices. If a known host
* controller is found, the init routine sets the buses_supported bitfield to
* contain the supported buses for that controller.
*/
enum chipbustype buses_supported = CHIP_BUSTYPE_NONSPI;
/**
* Programmers supporting multiple buses can have differing size limits on
* each bus. Store the limits for each bus in a common struct.
*/
struct decode_sizes max_rom_decode = {
.parallel = 0xffffffff,
.lpc = 0xffffffff,
.fwh = 0xffffffff,
.spi = 0xffffffff
};
extern int ichspi_lock;
static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
/*
* ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
* 0xFFFE0000-0xFFFFFFFF ROM select enable.
*/
tmp = pci_read_byte(dev, 0x47);
tmp |= 0x46;
pci_write_byte(dev, 0x47, tmp);
return 0;
}
static int enable_flash_sis85c496(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
tmp = pci_read_byte(dev, 0xd0);
tmp |= 0xf8;
pci_write_byte(dev, 0xd0, tmp);
return 0;
}
static int enable_flash_sis_mapping(struct pci_dev *dev, const char *name)
{
uint8_t new, newer;
/* Extended BIOS enable = 1, Lower BIOS Enable = 1 */
/* This is 0xFFF8000~0xFFFF0000 decoding on SiS 540/630. */
new = pci_read_byte(dev, 0x40);
new &= (~0x04); /* No idea why we clear bit 2. */
new |= 0xb; /* 0x3 for some chipsets, bit 7 seems to be don't care. */
pci_write_byte(dev, 0x40, new);
newer = pci_read_byte(dev, 0x40);
if (newer != new) {
printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
printf_debug("Stuck at 0x%x\n", newer);
return -1;
}
return 0;
}
static struct pci_dev *find_southbridge(uint16_t vendor, const char *name)
{
struct pci_dev *sbdev;
sbdev = pci_dev_find_vendorclass(vendor, 0x0601);
if (!sbdev)
sbdev = pci_dev_find_vendorclass(vendor, 0x0680);
if (!sbdev)
sbdev = pci_dev_find_vendorclass(vendor, 0x0000);
if (!sbdev)
fprintf(stderr, "No southbridge found for %s!\n", name);
if (sbdev)
printf_debug("Found southbridge %04x:%04x at %02x:%02x:%01x\n",
sbdev->vendor_id, sbdev->device_id,
sbdev->bus, sbdev->dev, sbdev->func);
return sbdev;
}
static int enable_flash_sis501(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
int ret = 0;
struct pci_dev *sbdev;
sbdev = find_southbridge(dev->vendor_id, name);
if (!sbdev)
return -1;
ret = enable_flash_sis_mapping(sbdev, name);
tmp = sio_read(0x22, 0x80);
tmp &= (~0x20);
tmp |= 0x4;
sio_write(0x22, 0x80, tmp);
tmp = sio_read(0x22, 0x70);
tmp &= (~0x20);
tmp |= 0x4;
sio_write(0x22, 0x70, tmp);
return ret;
}
static int enable_flash_sis5511(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
int ret = 0;
struct pci_dev *sbdev;
sbdev = find_southbridge(dev->vendor_id, name);
if (!sbdev)
return -1;
ret = enable_flash_sis_mapping(sbdev, name);
tmp = sio_read(0x22, 0x50);
tmp &= (~0x20);
tmp |= 0x4;
sio_write(0x22, 0x50, tmp);
return ret;
}
static int enable_flash_sis5596(struct pci_dev *dev, const char *name)
{
int ret;
ret = enable_flash_sis5511(dev, name);
/* FIXME: Needs same superio handling as enable_flash_sis630 */
return ret;
}
static int enable_flash_sis530(struct pci_dev *dev, const char *name)
{
uint8_t new, newer;
int ret = 0;
struct pci_dev *sbdev;
sbdev = find_southbridge(dev->vendor_id, name);
if (!sbdev)
return -1;
ret = enable_flash_sis_mapping(sbdev, name);
new = pci_read_byte(sbdev, 0x45);
new &= (~0x20);
new |= 0x4;
pci_write_byte(sbdev, 0x45, new);
newer = pci_read_byte(dev, 0x45);
if (newer != new) {
printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
printf_debug("Stuck at 0x%x\n", newer);
ret = -1;
}
return ret;
}
static int enable_flash_sis540(struct pci_dev *dev, const char *name)
{
uint8_t new, newer;
int ret = 0;
struct pci_dev *sbdev;
sbdev = find_southbridge(dev->vendor_id, name);
if (!sbdev)
return -1;
ret = enable_flash_sis_mapping(sbdev, name);
new = pci_read_byte(sbdev, 0x45);
new &= (~0x80);
new |= 0x40;
pci_write_byte(sbdev, 0x45, new);
newer = pci_read_byte(dev, 0x45);
if (newer != new) {
printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
printf_debug("Stuck at 0x%x\n", newer);
ret = -1;
}
return ret;
}
static int enable_flash_sis630(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
uint16_t siobase;
int ret;
ret = enable_flash_sis540(dev, name);
/* The same thing on SiS 950 Super I/O side... */
/* First probe for Super I/O on config port 0x2e. */
siobase = 0x2e;
enter_conf_mode_ite(siobase);
if (INB(siobase + 1) != 0x87) {
/* If that failed, try config port 0x4e. */
siobase = 0x4e;
enter_conf_mode_ite(siobase);
if (INB(siobase + 1) != 0x87) {
printf("Can not find SuperI/O.\n");
return -1;
}
}
/* Enable flash mapping. Works for most old ITE style SuperI/O. */
tmp = sio_read(siobase, 0x24);
tmp |= 0xfc;
sio_write(siobase, 0x24, tmp);
exit_conf_mode_ite(siobase);
return ret;
}
/* Datasheet:
* - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)
* - URL: http://www.intel.com/design/intarch/datashts/290562.htm
* - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
* - Order Number: 290562-001
*/
static int enable_flash_piix4(struct pci_dev *dev, const char *name)
{
uint16_t old, new;
uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */
old = pci_read_word(dev, xbcs);
/* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to
* FFF00000-FFF7FFFF are forwarded to ISA).
* Note: This bit is reserved on PIIX/PIIX3/MPIIX.
* Set bit 7: Extended BIOS Enable (PCI master accesses to
* FFF80000-FFFDFFFF are forwarded to ISA).
* Set bit 6: Lower BIOS Enable (PCI master, or ISA master accesses to
* the lower 64-Kbyte BIOS block (E0000-EFFFF) at the top
* of 1 Mbyte, or the aliases at the top of 4 Gbyte
* (FFFE0000-FFFEFFFF) result in the generation of BIOSCS#.
* Note: Accesses to FFFF0000-FFFFFFFF are always forwarded to ISA.
* Set bit 2: BIOSCS# Write Enable (1=enable, 0=disable).
*/
if (dev->device_id == 0x122e || dev->device_id == 0x7000
|| dev->device_id == 0x1234)
new = old | 0x00c4; /* PIIX/PIIX3/MPIIX: Bit 9 is reserved. */
else
new = old | 0x02c4;
if (new == old)
return 0;
pci_write_word(dev, xbcs, new);
if (pci_read_word(dev, xbcs) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
return -1;
}
return 0;
}
/*
* See ie. page 375 of "Intel I/O Controller Hub 7 (ICH7) Family Datasheet"
* http://download.intel.com/design/chipsets/datashts/30701303.pdf
*/
static int enable_flash_ich(struct pci_dev *dev, const char *name,
int bios_cntl)
{
uint8_t old, new;
/*
* Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
* just treating it as 8 bit wide seems to work fine in practice.
*/
old = pci_read_byte(dev, bios_cntl);
printf_debug("\nBIOS Lock Enable: %sabled, ",
(old & (1 << 1)) ? "en" : "dis");
printf_debug("BIOS Write Enable: %sabled, ",
(old & (1 << 0)) ? "en" : "dis");
printf_debug("BIOS_CNTL is 0x%x\n", old);
new = old | 1;
if (new == old)
return 0;
pci_write_byte(dev, bios_cntl, new);
if (pci_read_byte(dev, bios_cntl) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name);
return -1;
}
return 0;
}
static int enable_flash_ich_4e(struct pci_dev *dev, const char *name)
{
/*
* Note: ICH5 has registers similar to FWH_SEL1, FWH_SEL2 and
* FWH_DEC_EN1, but they are called FB_SEL1, FB_SEL2, FB_DEC_EN1 and
* FB_DEC_EN2.
*/
return enable_flash_ich(dev, name, 0x4e);
}
static int enable_flash_ich_dc(struct pci_dev *dev, const char *name)
{
uint32_t fwh_conf;
int i;
char *idsel = NULL;
/* Ignore all legacy ranges below 1 MB. */
/* FWH_SEL1 */
fwh_conf = pci_read_long(dev, 0xd0);
for (i = 7; i >= 0; i--)
printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
(fwh_conf >> (i * 4)) & 0xf);
/* FWH_SEL2 */
fwh_conf = pci_read_word(dev, 0xd4);
for (i = 3; i >= 0; i--)
printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
(fwh_conf >> (i * 4)) & 0xf);
/* FWH_DEC_EN1 */
fwh_conf = pci_read_word(dev, 0xd8);
for (i = 7; i >= 0; i--)
printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
(fwh_conf >> (i + 0x8)) & 0x1 ? "en" : "dis");
for (i = 3; i >= 0; i--)
printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
(fwh_conf >> i) & 0x1 ? "en" : "dis");
if (programmer_param)
idsel = strstr(programmer_param, "fwh_idsel=");
if (idsel) {
idsel += strlen("fwh_idsel=");
fwh_conf = (uint32_t)strtoul(idsel, NULL, 0);
/* FIXME: Need to undo this on shutdown. */
printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
pci_write_long(dev, 0xd0, fwh_conf);
pci_write_word(dev, 0xd4, fwh_conf);
}
return enable_flash_ich(dev, name, 0xdc);
}
#define ICH_STRAP_RSVD 0x00
#define ICH_STRAP_SPI 0x01
#define ICH_STRAP_PCI 0x02
#define ICH_STRAP_LPC 0x03
static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name)
{
uint32_t mmio_base;
mmio_base = (pci_read_long(dev, 0xbc)) << 8;
printf_debug("MMIO base at = 0x%x\n", mmio_base);
spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70);
printf_debug("0x6c: 0x%04x (CLOCK/DEBUG)\n",
mmio_readw(spibar + 0x6c));
/* Not sure if it speaks all these bus protocols. */
buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_VIA;
ich_init_opcodes();
return 0;
}
static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
int ich_generation)
{
int ret, i;
uint8_t old, new, bbs, buc;
uint16_t spibar_offset, tmp2;
uint32_t tmp, gcs;
void *rcrb;
//TODO: These names are incorrect for EP80579. For that, the solution would look like the commented line
//static const char *straps_names[] = {"SPI", "reserved", "reserved", "LPC" };
static const char *straps_names[] = { "reserved", "SPI", "PCI", "LPC" };
/* Enable Flash Writes */
ret = enable_flash_ich_dc(dev, name);
/* Get physical address of Root Complex Register Block */
tmp = pci_read_long(dev, 0xf0) & 0xffffc000;
printf_debug("\nRoot Complex Register Block address = 0x%x\n", tmp);
/* Map RCBA to virtual memory */
rcrb = physmap("ICH RCRB", tmp, 0x4000);
gcs = mmio_readl(rcrb + 0x3410);
printf_debug("GCS = 0x%x: ", gcs);
printf_debug("BIOS Interface Lock-Down: %sabled, ",
(gcs & 0x1) ? "en" : "dis");
bbs = (gcs >> 10) & 0x3;
printf_debug("BOOT BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]);
buc = mmio_readb(rcrb + 0x3414);
printf_debug("Top Swap : %s\n",
(buc & 1) ? "enabled (A16 inverted)" : "not enabled");
/* It seems the ICH7 does not support SPI and LPC chips at the same
* time. At least not with our current code. So we prevent searching
* on ICH7 when the southbridge is strapped to LPC
*/
if (ich_generation == 7 && bbs == ICH_STRAP_LPC) {
/* Not sure if it speaks LPC as well. */
buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH;
/* No further SPI initialization required */
return ret;
}
switch (ich_generation) {
case 7:
buses_supported = CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_ICH7;
spibar_offset = 0x3020;
break;
case 8:
/* Not sure if it speaks LPC as well. */
buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_ICH9;
spibar_offset = 0x3020;
break;
case 9:
case 10:
default: /* Future version might behave the same */
/* Not sure if it speaks LPC as well. */
buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_ICH9;
spibar_offset = 0x3800;
break;
}
/* SPIBAR is at RCRB+0x3020 for ICH[78] and RCRB+0x3800 for ICH9. */
printf_debug("SPIBAR = 0x%x + 0x%04x\n", tmp, spibar_offset);
/* Assign Virtual Address */
spibar = rcrb + spibar_offset;
switch (spi_controller) {
case SPI_CONTROLLER_ICH7:
printf_debug("0x00: 0x%04x (SPIS)\n",
mmio_readw(spibar + 0));
printf_debug("0x02: 0x%04x (SPIC)\n",
mmio_readw(spibar + 2));
printf_debug("0x04: 0x%08x (SPIA)\n",
mmio_readl(spibar + 4));
for (i = 0; i < 8; i++) {
int offs;
offs = 8 + (i * 8);
printf_debug("0x%02x: 0x%08x (SPID%d)\n", offs,
mmio_readl(spibar + offs), i);
printf_debug("0x%02x: 0x%08x (SPID%d+4)\n", offs + 4,
mmio_readl(spibar + offs + 4), i);
}
printf_debug("0x50: 0x%08x (BBAR)\n",
mmio_readl(spibar + 0x50));
printf_debug("0x54: 0x%04x (PREOP)\n",
mmio_readw(spibar + 0x54));
printf_debug("0x56: 0x%04x (OPTYPE)\n",
mmio_readw(spibar + 0x56));
printf_debug("0x58: 0x%08x (OPMENU)\n",
mmio_readl(spibar + 0x58));
printf_debug("0x5c: 0x%08x (OPMENU+4)\n",
mmio_readl(spibar + 0x5c));
for (i = 0; i < 4; i++) {
int offs;
offs = 0x60 + (i * 4);
printf_debug("0x%02x: 0x%08x (PBR%d)\n", offs,
mmio_readl(spibar + offs), i);
}
printf_debug("\n");
if (mmio_readw(spibar) & (1 << 15)) {
printf("WARNING: SPI Configuration Lockdown activated.\n");
ichspi_lock = 1;
}
ich_init_opcodes();
break;
case SPI_CONTROLLER_ICH9:
tmp2 = mmio_readw(spibar + 4);
printf_debug("0x04: 0x%04x (HSFS)\n", tmp2);
printf_debug("FLOCKDN %i, ", (tmp2 >> 15 & 1));
printf_debug("FDV %i, ", (tmp2 >> 14) & 1);
printf_debug("FDOPSS %i, ", (tmp2 >> 13) & 1);
printf_debug("SCIP %i, ", (tmp2 >> 5) & 1);
printf_debug("BERASE %i, ", (tmp2 >> 3) & 3);
printf_debug("AEL %i, ", (tmp2 >> 2) & 1);
printf_debug("FCERR %i, ", (tmp2 >> 1) & 1);
printf_debug("FDONE %i\n", (tmp2 >> 0) & 1);
tmp = mmio_readl(spibar + 0x50);
printf_debug("0x50: 0x%08x (FRAP)\n", tmp);
printf_debug("BMWAG %i, ", (tmp >> 24) & 0xff);
printf_debug("BMRAG %i, ", (tmp >> 16) & 0xff);
printf_debug("BRWA %i, ", (tmp >> 8) & 0xff);
printf_debug("BRRA %i\n", (tmp >> 0) & 0xff);
printf_debug("0x54: 0x%08x (FREG0)\n",
mmio_readl(spibar + 0x54));
printf_debug("0x58: 0x%08x (FREG1)\n",
mmio_readl(spibar + 0x58));
printf_debug("0x5C: 0x%08x (FREG2)\n",
mmio_readl(spibar + 0x5C));
printf_debug("0x60: 0x%08x (FREG3)\n",
mmio_readl(spibar + 0x60));
printf_debug("0x64: 0x%08x (FREG4)\n",
mmio_readl(spibar + 0x64));
printf_debug("0x74: 0x%08x (PR0)\n",
mmio_readl(spibar + 0x74));
printf_debug("0x78: 0x%08x (PR1)\n",
mmio_readl(spibar + 0x78));
printf_debug("0x7C: 0x%08x (PR2)\n",
mmio_readl(spibar + 0x7C));
printf_debug("0x80: 0x%08x (PR3)\n",
mmio_readl(spibar + 0x80));
printf_debug("0x84: 0x%08x (PR4)\n",
mmio_readl(spibar + 0x84));
printf_debug("0x90: 0x%08x (SSFS, SSFC)\n",
mmio_readl(spibar + 0x90));
printf_debug("0x94: 0x%04x (PREOP)\n",
mmio_readw(spibar + 0x94));
printf_debug("0x96: 0x%04x (OPTYPE)\n",
mmio_readw(spibar + 0x96));
printf_debug("0x98: 0x%08x (OPMENU)\n",
mmio_readl(spibar + 0x98));
printf_debug("0x9C: 0x%08x (OPMENU+4)\n",
mmio_readl(spibar + 0x9C));
printf_debug("0xA0: 0x%08x (BBAR)\n",
mmio_readl(spibar + 0xA0));
printf_debug("0xB0: 0x%08x (FDOC)\n",
mmio_readl(spibar + 0xB0));
if (tmp2 & (1 << 15)) {
printf("WARNING: SPI Configuration Lockdown activated.\n");
ichspi_lock = 1;
}
ich_init_opcodes();
break;
default:
/* Nothing */
break;
}
old = pci_read_byte(dev, 0xdc);
printf_debug("SPI Read Configuration: ");
new = (old >> 2) & 0x3;
switch (new) {
case 0:
case 1:
case 2:
printf_debug("prefetching %sabled, caching %sabled, ",
(new & 0x2) ? "en" : "dis",
(new & 0x1) ? "dis" : "en");
break;
default:
printf_debug("invalid prefetching/caching settings, ");
break;
}
return ret;
}
static int enable_flash_ich7(struct pci_dev *dev, const char *name)
{
return enable_flash_ich_dc_spi(dev, name, 7);
}
static int enable_flash_ich8(struct pci_dev *dev, const char *name)
{
return enable_flash_ich_dc_spi(dev, name, 8);
}
static int enable_flash_ich9(struct pci_dev *dev, const char *name)
{
return enable_flash_ich_dc_spi(dev, name, 9);
}
static int enable_flash_ich10(struct pci_dev *dev, const char *name)
{
return enable_flash_ich_dc_spi(dev, name, 10);
}
static int enable_flash_vt823x(struct pci_dev *dev, const char *name)
{
uint8_t val;
/* enable ROM decode range (1MB) FFC00000 - FFFFFFFF */
pci_write_byte(dev, 0x41, 0x7f);
/* ROM write enable */
val = pci_read_byte(dev, 0x40);
val |= 0x10;
pci_write_byte(dev, 0x40, val);
if (pci_read_byte(dev, 0x40) != val) {
printf("\nWARNING: Failed to enable flash write on \"%s\"\n",
name);
return -1;
}
return 0;
}
static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
{
uint8_t reg8;
#define DECODE_CONTROL_REG2 0x5b /* F0 index 0x5b */
#define ROM_AT_LOGIC_CONTROL_REG 0x52 /* F0 index 0x52 */
#define LOWER_ROM_ADDRESS_RANGE (1 << 0)
#define ROM_WRITE_ENABLE (1 << 1)
#define UPPER_ROM_ADDRESS_RANGE (1 << 2)
#define BIOS_ROM_POSITIVE_DECODE (1 << 5)
/* Decode 0x000E0000-0x000FFFFF (128 KB), not just 64 KB, and
* decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 KB.
* Make the configured ROM areas writable.
*/
reg8 = pci_read_byte(dev, ROM_AT_LOGIC_CONTROL_REG);
reg8 |= LOWER_ROM_ADDRESS_RANGE;
reg8 |= UPPER_ROM_ADDRESS_RANGE;
reg8 |= ROM_WRITE_ENABLE;
pci_write_byte(dev, ROM_AT_LOGIC_CONTROL_REG, reg8);
/* Set positive decode on ROM. */
reg8 = pci_read_byte(dev, DECODE_CONTROL_REG2);
reg8 |= BIOS_ROM_POSITIVE_DECODE;
pci_write_byte(dev, DECODE_CONTROL_REG2, reg8);
return 0;
}
/**
* Geode systems write protect the BIOS via RCONFs (cache settings similar
* to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22.
*
* Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL.
* To enable write to NOR Boot flash for the benefit of systems that have such
* a setup, raise MSR 0x51400018 WE_CS3 (write enable Boot Flash Chip Select).
*/
static int enable_flash_cs5536(struct pci_dev *dev, const char *name)
{
#define MSR_RCONF_DEFAULT 0x1808
#define MSR_NORF_CTL 0x51400018
msr_t msr;
/* Geode only has a single core */
if (setup_cpu_msr(0))
return -1;
msr = rdmsr(MSR_RCONF_DEFAULT);
if ((msr.hi >> 24) != 0x22) {
msr.hi &= 0xfbffffff;
wrmsr(MSR_RCONF_DEFAULT, msr);
}
msr = rdmsr(MSR_NORF_CTL);
/* Raise WE_CS3 bit. */
msr.lo |= 0x08;
wrmsr(MSR_NORF_CTL, msr);
cleanup_cpu_msr();
#undef MSR_RCONF_DEFAULT
#undef MSR_NORF_CTL
return 0;
}
static int enable_flash_sc1100(struct pci_dev *dev, const char *name)
{
uint8_t new;
pci_write_byte(dev, 0x52, 0xee);
new = pci_read_byte(dev, 0x52);
if (new != 0xee) {
printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x52, new, name);
return -1;
}
return 0;
}
/* Works for AMD-8111, VIA VT82C586A/B, VIA VT82C686A/B. */
static int enable_flash_amd8111(struct pci_dev *dev, const char *name)
{
uint8_t old, new;
/* Enable decoding at 0xffb00000 to 0xffffffff. */
old = pci_read_byte(dev, 0x43);
new = old | 0xC0;
if (new != old) {
pci_write_byte(dev, 0x43, new);
if (pci_read_byte(dev, 0x43) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name);
}
}
/* Enable 'ROM write' bit. */
old = pci_read_byte(dev, 0x40);
new = old | 0x01;
if (new == old)
return 0;
pci_write_byte(dev, 0x40, new);
if (pci_read_byte(dev, 0x40) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
return -1;
}
return 0;
}
static int enable_flash_sb600(struct pci_dev *dev, const char *name)
{
uint32_t tmp, prot;
uint8_t reg;
struct pci_dev *smbus_dev;
int has_spi = 1;
/* Clear ROM protect 0-3. */
for (reg = 0x50; reg < 0x60; reg += 4) {
prot = pci_read_long(dev, reg);
/* No protection flags for this region?*/
if ((prot & 0x3) == 0)
continue;
printf_debug("SB600 %s%sprotected from %u to %u\n",
(prot & 0x1) ? "write " : "",
(prot & 0x2) ? "read " : "",
(prot & 0xfffffc00),
(prot & 0xfffffc00) + ((prot & 0x3ff) << 8));
prot &= 0xfffffffc;
pci_write_byte(dev, reg, prot);
prot = pci_read_long(dev, reg);
if (prot & 0x3)
printf("SB600 %s%sunprotect failed from %u to %u\n",
(prot & 0x1) ? "write " : "",
(prot & 0x2) ? "read " : "",
(prot & 0xfffffc00),
(prot & 0xfffffc00) + ((prot & 0x3ff) << 8));
}
/* Read SPI_BaseAddr */
tmp = pci_read_long(dev, 0xa0);
tmp &= 0xffffffe0; /* remove bits 4-0 (reserved) */
printf_debug("SPI base address is at 0x%x\n", tmp);
/* If the BAR has address 0, it is unlikely SPI is used. */
if (!tmp)
has_spi = 0;
if (has_spi) {
/* Physical memory has to be mapped at page (4k) boundaries. */
sb600_spibar = physmap("SB600 SPI registers", tmp & 0xfffff000,
0x1000);
/* The low bits of the SPI base address are used as offset into
* the mapped page.
*/
sb600_spibar += tmp & 0xfff;
tmp = pci_read_long(dev, 0xa0);
printf_debug("AltSpiCSEnable=%i, SpiRomEnable=%i, "
"AbortEnable=%i\n", tmp & 0x1, (tmp & 0x2) >> 1,
(tmp & 0x4) >> 2);
tmp = (pci_read_byte(dev, 0xba) & 0x4) >> 2;
printf_debug("PrefetchEnSPIFromIMC=%i, ", tmp);
tmp = pci_read_byte(dev, 0xbb);
printf_debug("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n",
tmp & 0x1, (tmp & 0x20) >> 5);
tmp = mmio_readl(sb600_spibar);
printf_debug("SpiArbEnable=%i, SpiAccessMacRomEn=%i, "
"SpiHostAccessRomEn=%i, ArbWaitCount=%i, "
"SpiBridgeDisable=%i, DropOneClkOnRd=%i\n",
(tmp >> 19) & 0x1, (tmp >> 22) & 0x1,
(tmp >> 23) & 0x1, (tmp >> 24) & 0x7,
(tmp >> 27) & 0x1, (tmp >> 28) & 0x1);
}
/* Look for the SMBus device. */
smbus_dev = pci_dev_find(0x1002, 0x4385);
if (has_spi && !smbus_dev) {
fprintf(stderr, "ERROR: SMBus device not found. Not enabling SPI.\n");
has_spi = 0;
}
if (has_spi) {
/* Note about the bit tests below: If a bit is zero, the GPIO is SPI. */
/* GPIO11/SPI_DO and GPIO12/SPI_DI status */
reg = pci_read_byte(smbus_dev, 0xAB);
reg &= 0xC0;
printf_debug("GPIO11 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_DO");
printf_debug("GPIO12 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_DI");
if (reg != 0x00)
has_spi = 0;
/* GPIO31/SPI_HOLD and GPIO32/SPI_CS status */
reg = pci_read_byte(smbus_dev, 0x83);
reg &= 0xC0;
printf_debug("GPIO31 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_HOLD");
printf_debug("GPIO32 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_CS");
/* SPI_HOLD is not used on all boards, filter it out. */
if ((reg & 0x80) != 0x00)
has_spi = 0;
/* GPIO47/SPI_CLK status */
reg = pci_read_byte(smbus_dev, 0xA7);
reg &= 0x40;
printf_debug("GPIO47 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_CLK");
if (reg != 0x00)
has_spi = 0;
}
buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH;
if (has_spi) {
buses_supported |= CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_SB600;
}
/* Read ROM strap override register. */
OUTB(0x8f, 0xcd6);
reg = INB(0xcd7);
reg &= 0x0e;
printf_debug("ROM strap override is %sactive", (reg & 0x02) ? "" : "not ");
if (reg & 0x02) {
switch ((reg & 0x0c) >> 2) {
case 0x00:
printf_debug(": LPC");
break;
case 0x01:
printf_debug(": PCI");
break;
case 0x02:
printf_debug(": FWH");
break;
case 0x03:
printf_debug(": SPI");
break;
}
}
printf_debug("\n");
/* Force enable SPI ROM in SB600 PM register.
* If we enable SPI ROM here, we have to disable it after we leave.
* But how can we know which ROM we are going to handle? So we have
* to trade off. We only access LPC ROM if we boot via LPC ROM. And
* only SPI ROM if we boot via SPI ROM. If you want to access SPI on
* boards with LPC straps, you have to use the code below.
*/
/*
OUTB(0x8f, 0xcd6);
OUTB(0x0e, 0xcd7);
*/
return 0;
}
static int enable_flash_nvidia_nforce2(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
pci_write_byte(dev, 0x92, 0);
tmp = pci_read_byte(dev, 0x6d);
tmp |= 0x01;
pci_write_byte(dev, 0x6d, tmp);
return 0;
}
static int enable_flash_ck804(struct pci_dev *dev, const char *name)
{
uint8_t old, new;
old = pci_read_byte(dev, 0x88);
new = old | 0xc0;
if (new != old) {
pci_write_byte(dev, 0x88, new);
if (pci_read_byte(dev, 0x88) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name);
}
}
old = pci_read_byte(dev, 0x6d);
new = old | 0x01;
if (new == old)
return 0;
pci_write_byte(dev, 0x6d, new);
if (pci_read_byte(dev, 0x6d) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
return -1;
}
return 0;
}
/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
static int enable_flash_sb400(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
struct pci_dev *smbusdev;
/* Look for the SMBus device. */
smbusdev = pci_dev_find(0x1002, 0x4372);
if (!smbusdev) {
fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n");
exit(1);
}
/* Enable some SMBus stuff. */
tmp = pci_read_byte(smbusdev, 0x79);
tmp |= 0x01;
pci_write_byte(smbusdev, 0x79, tmp);
/* Change southbridge. */
tmp = pci_read_byte(dev, 0x48);
tmp |= 0x21;
pci_write_byte(dev, 0x48, tmp);
/* Now become a bit silly. */
tmp = INB(0xc6f);
OUTB(tmp, 0xeb);
OUTB(tmp, 0xeb);
tmp |= 0x40;
OUTB(tmp, 0xc6f);
OUTB(tmp, 0xeb);
OUTB(tmp, 0xeb);
return 0;
}
static int enable_flash_mcp55(struct pci_dev *dev, const char *name)
{
uint8_t old, new, byte;
uint16_t word;
/* Set the 0-16 MB enable bits. */
byte = pci_read_byte(dev, 0x88);
byte |= 0xff; /* 256K */
pci_write_byte(dev, 0x88, byte);
byte = pci_read_byte(dev, 0x8c);
byte |= 0xff; /* 1M */
pci_write_byte(dev, 0x8c, byte);
word = pci_read_word(dev, 0x90);
word |= 0x7fff; /* 16M */
pci_write_word(dev, 0x90, word);
old = pci_read_byte(dev, 0x6d);
new = old | 0x01;
if (new == old)
return 0;
pci_write_byte(dev, 0x6d, new);
if (pci_read_byte(dev, 0x6d) != new) {
printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
return -1;
}
return 0;
}
static int enable_flash_ht1000(struct pci_dev *dev, const char *name)
{
uint8_t byte;
/* Set the 4MB enable bit. */
byte = pci_read_byte(dev, 0x41);
byte |= 0x0e;
pci_write_byte(dev, 0x41, byte);
byte = pci_read_byte(dev, 0x43);
byte |= (1 << 4);
pci_write_byte(dev, 0x43, byte);
return 0;
}
/**
* Usually on the x86 architectures (and on other PC-like platforms like some
* Alphas or Itanium) the system flash is mapped right below 4G. On the AMD
* Elan SC520 only a small piece of the system flash is mapped there, but the
* complete flash is mapped somewhere below 1G. The position can be determined
* by the BOOTCS PAR register.
*/
static int get_flashbase_sc520(struct pci_dev *dev, const char *name)
{
int i, bootcs_found = 0;
uint32_t parx = 0;
void *mmcr;
/* 1. Map MMCR */
mmcr = physmap("Elan SC520 MMCR", 0xfffef000, getpagesize());
/* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for
* BOOTCS region (PARx[31:29] = 100b)e
*/
for (i = 0x88; i <= 0xc4; i += 4) {
parx = mmio_readl(mmcr + i);
if ((parx >> 29) == 4) {
bootcs_found = 1;
break; /* BOOTCS found */
}
}
/* 3. PARx[25] = 1b --> flashbase[29:16] = PARx[13:0]
* PARx[25] = 0b --> flashbase[29:12] = PARx[17:0]
*/
if (bootcs_found) {
if (parx & (1 << 25)) {
parx &= (1 << 14) - 1; /* Mask [13:0] */
flashbase = parx << 16;
} else {
parx &= (1 << 18) - 1; /* Mask [17:0] */
flashbase = parx << 12;
}
} else {
printf("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n");
}
/* 4. Clean up */
physunmap(mmcr, getpagesize());
return 0;
}
/* Please keep this list alphabetically sorted by vendor/device. */
const struct penable chipset_enables[] = {
{0x10B9, 0x1533, OK, "ALi", "M1533", enable_flash_ali_m1533},
{0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd8111},
{0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111},
{0x1078, 0x0100, OK, "AMD", "CS5530(A)", enable_flash_cs5530},
{0x1022, 0x2080, OK, "AMD", "CS5536", enable_flash_cs5536},
{0x1022, 0x2090, OK, "AMD", "CS5536", enable_flash_cs5536},
{0x1022, 0x3000, OK, "AMD", "Elan SC520", get_flashbase_sc520},
{0x1002, 0x438D, OK, "AMD", "SB600", enable_flash_sb600},
{0x1002, 0x439d, OK, "AMD", "SB700/SB710/SB750", enable_flash_sb600},
{0x100b, 0x0510, NT, "AMD", "SC1100", enable_flash_sc1100},
{0x1002, 0x4377, OK, "ATI", "SB400", enable_flash_sb400},
{0x1166, 0x0205, OK, "Broadcom", "HT-1000", enable_flash_ht1000},
{0x8086, 0x3b00, NT, "Intel", "3400 Desktop", enable_flash_ich10},
{0x8086, 0x3b01, NT, "Intel", "3400 Mobile", enable_flash_ich10},
{0x8086, 0x3b0d, NT, "Intel", "3400 Mobile SFF", enable_flash_ich10},
{0x8086, 0x7198, OK, "Intel", "440MX", enable_flash_piix4},
{0x8086, 0x25a1, OK, "Intel", "6300ESB", enable_flash_ich_4e},
{0x8086, 0x2670, OK, "Intel", "631xESB/632xESB/3100", enable_flash_ich_dc},
{0x8086, 0x5031, OK, "Intel", "EP80579", enable_flash_ich7},
{0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e},
{0x8086, 0x3a18, OK, "Intel", "ICH10", enable_flash_ich10},
{0x8086, 0x3a1a, OK, "Intel", "ICH10D", enable_flash_ich10},
{0x8086, 0x3a14, OK, "Intel", "ICH10DO", enable_flash_ich10},
{0x8086, 0x3a16, OK, "Intel", "ICH10R", enable_flash_ich10},
{0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e},
{0x8086, 0x244c, OK, "Intel", "ICH2-M", enable_flash_ich_4e},
{0x8086, 0x248c, OK, "Intel", "ICH3-M", enable_flash_ich_4e},
{0x8086, 0x2480, OK, "Intel", "ICH3-S", enable_flash_ich_4e},
{0x8086, 0x24c0, OK, "Intel", "ICH4/ICH4-L", enable_flash_ich_4e},
{0x8086, 0x24cc, OK, "Intel", "ICH4-M", enable_flash_ich_4e},
{0x8086, 0x24d0, OK, "Intel", "ICH5/ICH5R", enable_flash_ich_4e},
{0x8086, 0x2640, OK, "Intel", "ICH6/ICH6R", enable_flash_ich_dc},
{0x8086, 0x2641, OK, "Intel", "ICH6-M", enable_flash_ich_dc},
{0x8086, 0x27b0, OK, "Intel", "ICH7DH", enable_flash_ich7},
{0x8086, 0x27b8, OK, "Intel", "ICH7/ICH7R", enable_flash_ich7},
{0x8086, 0x27b9, OK, "Intel", "ICH7M", enable_flash_ich7},
{0x8086, 0x27bd, OK, "Intel", "ICH7MDH", enable_flash_ich7},
{0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e},
{0x8086, 0x2812, OK, "Intel", "ICH8DH", enable_flash_ich8},
{0x8086, 0x2814, OK, "Intel", "ICH8DO", enable_flash_ich8},
{0x8086, 0x2810, OK, "Intel", "ICH8/ICH8R", enable_flash_ich8},
{0x8086, 0x2815, OK, "Intel", "ICH8M", enable_flash_ich8},
{0x8086, 0x2811, OK, "Intel", "ICH8M-E", enable_flash_ich8},
{0x8086, 0x2918, OK, "Intel", "ICH9", enable_flash_ich9},
{0x8086, 0x2912, OK, "Intel", "ICH9DH", enable_flash_ich9},
{0x8086, 0x2914, OK, "Intel", "ICH9DO", enable_flash_ich9},
{0x8086, 0x2919, OK, "Intel", "ICH9M", enable_flash_ich9},
{0x8086, 0x2917, OK, "Intel", "ICH9M-E", enable_flash_ich9},
{0x8086, 0x2916, OK, "Intel", "ICH9R", enable_flash_ich9},
{0x8086, 0x2910, OK, "Intel", "ICH9 Engineering Sample", enable_flash_ich9},
{0x8086, 0x1234, NT, "Intel", "MPIIX", enable_flash_piix4},
{0x8086, 0x7000, OK, "Intel", "PIIX3", enable_flash_piix4},
{0x8086, 0x7110, OK, "Intel", "PIIX4/4E/4M", enable_flash_piix4},
{0x8086, 0x122e, OK, "Intel", "PIIX", enable_flash_piix4},
{0x10de, 0x0030, OK, "NVIDIA", "nForce4/MCP4", enable_flash_nvidia_nforce2},
{0x10de, 0x0050, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* LPC */
{0x10de, 0x0051, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* Pro */
{0x10de, 0x0060, OK, "NVIDIA", "NForce2", enable_flash_nvidia_nforce2},
/* Slave, should not be here, to fix known bug for A01. */
{0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804},
{0x10de, 0x0260, NT, "NVIDIA", "MCP51", enable_flash_ck804},
{0x10de, 0x0261, NT, "NVIDIA", "MCP51", enable_flash_ck804},
{0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804},
{0x10de, 0x0263, NT, "NVIDIA", "MCP51", enable_flash_ck804},
{0x10de, 0x0360, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* M57SLI*/
{0x10de, 0x0361, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0362, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0363, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0364, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0365, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0366, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */
{0x10de, 0x0548, OK, "NVIDIA", "MCP67", enable_flash_mcp55},
{0x1039, 0x0496, NT, "SiS", "85C496+497", enable_flash_sis85c496},
{0x1039, 0x0406, NT, "SiS", "501/5101/5501", enable_flash_sis501},
{0x1039, 0x5511, NT, "SiS", "5511", enable_flash_sis5511},
{0x1039, 0x5596, NT, "SiS", "5596", enable_flash_sis5596},
{0x1039, 0x5571, NT, "SiS", "5571", enable_flash_sis530},
{0x1039, 0x5591, NT, "SiS", "5591/5592", enable_flash_sis530},
{0x1039, 0x5597, NT, "SiS", "5597/5598/5581/5120", enable_flash_sis530},
{0x1039, 0x0530, NT, "SiS", "530", enable_flash_sis530},
{0x1039, 0x5600, NT, "SiS", "600", enable_flash_sis530},
{0x1039, 0x0620, NT, "SiS", "620", enable_flash_sis530},
{0x1039, 0x0540, NT, "SiS", "540", enable_flash_sis540},
{0x1039, 0x0630, NT, "SiS", "630", enable_flash_sis630},
{0x1039, 0x0635, NT, "SiS", "635", enable_flash_sis630},
{0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis630},
{0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis630},
{0x1039, 0x0646, NT, "SiS", "645DX", enable_flash_sis630},
{0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis630},
{0x1039, 0x0650, NT, "SiS", "650", enable_flash_sis630},
{0x1039, 0x0651, NT, "SiS", "651", enable_flash_sis630},
{0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis630},
{0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis630},
{0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis630},
{0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis630},
{0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis630},
{0x1039, 0x0745, NT, "SiS", "745", enable_flash_sis630},
{0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis630},
{0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis630},
{0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis630},
{0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x},
{0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x},
{0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x},
{0x1106, 0x3177, OK, "VIA", "VT8235", enable_flash_vt823x},
{0x1106, 0x3227, OK, "VIA", "VT8237", enable_flash_vt823x},
{0x1106, 0x3337, OK, "VIA", "VT8237A", enable_flash_vt823x},
{0x1106, 0x3372, OK, "VIA", "VT8237S", enable_flash_vt8237s_spi},
{0x1106, 0x8353, OK, "VIA", "VX800", enable_flash_vt8237s_spi},
{0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111},
{0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111},
{0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111},
{},
};
int chipset_flash_enable(void)
{
struct pci_dev *dev = 0;
int ret = -2; /* Nothing! */
int i;
/* Now let's try to find the chipset we have... */
for (i = 0; chipset_enables[i].vendor_name != NULL; i++) {
dev = pci_dev_find(chipset_enables[i].vendor_id,
chipset_enables[i].device_id);
if (dev)
break;
}
if (dev) {
printf("Found chipset \"%s %s\", enabling flash write... ",
chipset_enables[i].vendor_name,
chipset_enables[i].device_name);
ret = chipset_enables[i].doit(dev,
chipset_enables[i].device_name);
if (ret)
printf("FAILED!\n");
else
printf("OK.\n");
}
printf("This chipset supports the following protocols: %s.\n",
flashbuses_to_text(buses_supported));
return ret;
}
Reference in New Issue View Git Blame Copy Permalink