1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 07:02:34 +02:00
flashrom/print_wiki.c
Mark Marshall 90021f28ff Add support for the Open Graphics Project development card, OGD1, as a SPI flash programmer
The project is in the the process of designing and making a complete,
open source, graphics card. More info at http://wiki.opengraphics.org.

The first development card is a PCI add in card containing a couple of
FPGAs and a couple of serial flash chips (amongst other things). The
FPGAs are called XP10 and S3 (their part numbers). The XP10 contains its
own flash and does not need to be programmed by flashrom - it ensures
that the device can enumerate on the PCI bus without needing further
configuration.

The larger FPGA is the S3. This is configured from a large SPI flash
(2 MBytes). The second SPI flash is used to store the VGA BIOS. It is
smaller (128 KBytes). This patch adds support for programming either of
the two SPI flash chips.

The programmer device takes one configuration option which selects which
of the two flash chips is accessed. This must be set to either "cprom"
or "bprom". (The project refers to the two chips as "cprom" / "bprom",
"s3" and "bios" are more readable alternatives).

Add support for SST SST25VF010 (REMS). Mark SST SST25VF016B as tested
for write.

Corresponding to flashrom svn r1241.

Signed-off-by: Mark Marshall <mark.marshall@csr.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
2010-12-03 14:48:11 +00:00

308 lines
10 KiB
C

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2009 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <time.h>
#include "flash.h"
#include "flashchips.h"
#include "programmer.h"
static const char * const wiki_header = "= Supported devices =\n\n\
<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
background-color:#eeeeee; align:right; border:1px solid #aabbcc;\"><small>\n\
Please do '''not''' edit these tables in the wiki directly, they are \
generated by pasting '''flashrom -z''' output.<br />\
'''Last update:''' %s(generated by flashrom %s)\n</small></div>\n";
#if CONFIG_INTERNAL == 1
static const char * const chipset_th = "{| border=\"0\" style=\"font-size: smaller\"\n\
|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Southbridge\n! align=\"left\" | PCI IDs\n\
! align=\"left\" | Status\n\n";
static const char * const board_th = "{| border=\"0\" style=\"font-size: smaller\" \
valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Mainboard\n! align=\"left\" | Required option\n! align=\"left\" | Status\n\n";
static const char * const board_intro = "\
\n== Supported mainboards ==\n\n\
In general, it is very likely that flashrom works out of the box even if your \
mainboard is not listed below.\n\nThis is a list of mainboards where we have \
verified that they either do or do not need any special initialization to \
make flashrom work (given flashrom supports the respective chipset and flash \
chip), or that they do not yet work at all. If they do not work, support may \
or may not be added later.\n\n\
Mainboards which don't appear in the list may or may not work (we don't \
know, someone has to give it a try). Please report any further verified \
mainboards on the [[Mailinglist|mailing list]].\n";
#endif
static const char * const chip_th = "{| border=\"0\" style=\"font-size: smaller\" \
valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Device\n! align=\"left\" | Size / KB\n\
! align=\"left\" | Type\n! align=\"left\" colspan=\"4\" | Status\n\n\
|- bgcolor=\"#6699ff\"\n| colspan=\"4\" | &nbsp;\n\
| Probe\n| Read\n| Erase\n| Write\n\n";
static const char * const programmer_section = "\
\n== Supported programmers ==\n\nThis is a list \
of supported PCI devices flashrom can use as programmer:\n\n{| border=\"0\" \
valign=\"top\"\n| valign=\"top\"|\n\n{| border=\"0\" style=\"font-size: \
smaller\" valign=\"top\"\n|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Device\n! align=\"left\" | PCI IDs\n\
! align=\"left\" | Status\n\n";
#if CONFIG_INTERNAL == 1
static const char * const laptop_intro = "\n== Supported laptops/notebooks ==\n\n\
In general, flashing laptops is more difficult because laptops\n\n\
* often use the flash chip for stuff besides the BIOS,\n\
* often have special protection stuff which has to be handled by flashrom,\n\
* often use flash translation circuits which need drivers in flashrom.\n\n\
<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
background-color:#ff6666; align:right; border:1px solid #000000;\">\n\
'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
untested laptops unless you have a means to recover from a flashing that goes \
wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
static void print_supported_chipsets_wiki(int cols)
{
int i, j, enablescount = 0, color = 1;
const struct penable *e;
for (e = chipset_enables; e->vendor_name != NULL; e++)
enablescount++;
printf("\n== Supported chipsets ==\n\nTotal amount of supported "
"chipsets: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n| "
"valign=\"top\"|\n\n%s", enablescount, chipset_th);
e = chipset_enables;
for (i = 0, j = 0; e[i].vendor_name != NULL; i++, j++) {
/* Alternate colors if the vendor changes. */
if (i > 0 && strcmp(e[i].vendor_name, e[i - 1].vendor_name))
color = !color;
printf("|- bgcolor=\"#%s\"\n| %s || %s "
"|| %04x:%04x || %s\n", (color) ? "eeeeee" : "dddddd",
e[i].vendor_name, e[i].device_name,
e[i].vendor_id, e[i].device_id,
(e[i].status == OK) ? "{{OK}}" : "{{?3}}");
/* Split table in 'cols' columns. */
if (j >= (enablescount / cols + 1)) {
printf("\n|}\n\n| valign=\"top\"|\n\n%s", chipset_th);
j = 0;
}
}
printf("\n|}\n\n|}\n");
}
static void wiki_helper(const char *devicetype, int cols,
const struct board_info boards[])
{
int i, j, k = 0, boardcount_good = 0, boardcount_bad = 0, color = 1;
int num_notes = 0;
char *notes = calloc(1, 1);
char tmp[900 + 1];
const struct board_pciid_enable *b = board_pciid_enables;
for (i = 0; boards[i].vendor != NULL; i++) {
if (boards[i].working)
boardcount_good++;
else
boardcount_bad++;
}
printf("\n\nTotal amount of supported %s: '''%d'''. "
"Not yet supported (i.e., known-bad): '''%d'''.\n\n"
"{| border=\"0\" valign=\"top\"\n| valign=\"top\"|\n\n%s",
devicetype, boardcount_good, boardcount_bad, board_th);
for (i = 0, j = 0; boards[i].vendor != NULL; i++, j++) {
/* Alternate colors if the vendor changes. */
if (i > 0 && strcmp(boards[i].vendor, boards[i - 1].vendor))
color = !color;
k = 0;
while ((b[k].vendor_name != NULL) &&
(strcmp(b[k].vendor_name, boards[i].vendor) ||
strcmp(b[k].board_name, boards[i].name))) {
k++;
}
printf("|- bgcolor=\"#%s\"\n| %s || %s%s %s%s || %s%s%s%s "
"|| {{%s}}", (color) ? "eeeeee" : "dddddd",
boards[i].vendor,
boards[i].url ? "[" : "",
boards[i].url ? boards[i].url : "",
boards[i].name,
boards[i].url ? "]" : "",
b[k].lb_vendor ? "-m " : "&mdash;",
b[k].lb_vendor ? b[k].lb_vendor : "",
b[k].lb_vendor ? ":" : "",
b[k].lb_vendor ? b[k].lb_part : "",
(boards[i].working) ? "OK" : "No");
if (boards[i].note) {
printf("<sup>%d</sup>\n", num_notes + 1);
snprintf((char *)&tmp, 900, "<sup>%d</sup> %s<br />\n",
1 + num_notes++, boards[i].note);
notes = strcat_realloc(notes, (char *)&tmp);
} else {
printf("\n");
}
/* Split table in 'cols' columns. */
if (j >= ((boardcount_good + boardcount_bad) / cols + 1)) {
printf("\n|}\n\n| valign=\"top\"|\n\n%s", board_th);
j = 0;
}
}
printf("\n|}\n\n|}\n");
if (num_notes > 0)
printf("\n<small>\n%s</small>\n", notes);
free(notes);
}
static void print_supported_boards_wiki(void)
{
printf("%s", board_intro);
wiki_helper("boards", 2, boards_known);
printf("%s", laptop_intro);
wiki_helper("laptops", 1, laptops_known);
}
#endif
static void print_supported_chips_wiki(int cols)
{
int i = 0, c = 1, chipcount = 0;
struct flashchip *f, *old = NULL;
uint32_t t;
for (f = flashchips; f->name != NULL; f++)
chipcount++;
printf("\n== Supported chips ==\n\nTotal amount of supported "
"chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n"
"| valign=\"top\"|\n\n%s", chipcount, chip_th);
for (f = flashchips; f->name != NULL; f++, i++) {
/* Don't print "unknown XXXX SPI chip" entries. */
if (!strncmp(f->name, "unknown", 7))
continue;
/* Alternate colors if the vendor changes. */
if (old != NULL && strcmp(old->vendor, f->vendor))
c = !c;
t = f->tested;
printf("|- bgcolor=\"#%s\"\n| %s || %s || %d "
"|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}\n",
(c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
f->total_size, flashbuses_to_text(f->bustype),
(t & TEST_OK_PROBE) ? "OK" :
(t & TEST_BAD_PROBE) ? "No" : "?3",
(t & TEST_OK_READ) ? "OK" :
(t & TEST_BAD_READ) ? "No" : "?3",
(t & TEST_OK_ERASE) ? "OK" :
(t & TEST_BAD_ERASE) ? "No" : "?3",
(t & TEST_OK_WRITE) ? "OK" :
(t & TEST_BAD_WRITE) ? "No" : "?3");
/* Split table into 'cols' columns. */
if (i >= (chipcount / cols + 1)) {
printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th);
i = 0;
}
old = f;
}
printf("\n|}\n\n|}\n");
}
static void print_supported_pcidevs_wiki(const struct pcidev_status *devs)
{
int i = 0;
static int c = 0;
/* Alternate colors if the vendor changes. */
c = !c;
for (i = 0; devs[i].vendor_name != NULL; i++) {
printf("|- bgcolor=\"#%s\"\n| %s || %s || "
"%04x:%04x || {{%s}}\n", (c) ? "eeeeee" : "dddddd",
devs[i].vendor_name, devs[i].device_name,
devs[i].vendor_id, devs[i].device_id,
(devs[i].status == NT) ? "?3" : "OK");
}
}
void print_supported_wiki(void)
{
time_t t = time(NULL);
printf(wiki_header, ctime(&t), flashrom_version);
print_supported_chips_wiki(2);
#if CONFIG_INTERNAL == 1
print_supported_chipsets_wiki(3);
print_supported_boards_wiki();
#endif
printf("%s", programmer_section);
#if CONFIG_NIC3COM == 1
print_supported_pcidevs_wiki(nics_3com);
#endif
#if CONFIG_NICREALTEK == 1
print_supported_pcidevs_wiki(nics_realtek);
print_supported_pcidevs_wiki(nics_realteksmc1211);
#endif
#if CONFIG_NICNATSEMI == 1
print_supported_pcidevs_wiki(nics_natsemi);
#endif
#if CONFIG_GFXNVIDIA == 1
print_supported_pcidevs_wiki(gfx_nvidia);
#endif
#if CONFIG_DRKAISER == 1
print_supported_pcidevs_wiki(drkaiser_pcidev);
#endif
#if CONFIG_SATASII == 1
print_supported_pcidevs_wiki(satas_sii);
#endif
#if CONFIG_ATAHPT == 1
print_supported_pcidevs_wiki(ata_hpt);
#endif
#if CONFIG_NICINTEL_SPI == 1
print_supported_pcidevs_wiki(nics_intel_spi);
#endif
#if CONFIG_OGP_SPI == 1
print_supported_pcidevs_wiki(ogp_spi);
#endif
printf("\n|}\n");
}