1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 15:12:36 +02:00
flashrom/m29f400bt.c
Carl-Daniel Hailfinger b28349f8bc Remove progress printing from individual flash chip drivers
Progress printing should be handled in the generic code, and will end up
there once partial write is possible.

Corresponding to flashrom svn r1207.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
2010-10-08 20:29:57 +00:00

158 lines
4.1 KiB
C

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "flash.h"
#include "chipdrivers.h"
/* WARNING!
This chip uses the standard JEDEC Addresses in 16-bit mode as word
addresses. In byte mode, 0xAAA has to be used instead of 0x555 and
0x555 instead of 0x2AA. Do *not* blindly replace with standard JEDEC
functions. */
void write_page_m29f400bt(chipaddr bios, uint8_t *src,
chipaddr dst, int page_size)
{
int i;
for (i = 0; i < page_size; i++) {
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0xA0, bios + 0xAAA);
/* transfer data from source to destination */
chip_writeb(*src, dst);
toggle_ready_jedec(dst);
msg_cerr("Value in the flash at address 0x%lx = %#x, want %#x\n",
(dst - bios), chip_readb(dst), *src);
dst++;
src++;
}
}
int probe_m29f400bt(struct flashchip *flash)
{
chipaddr bios = flash->virtual_memory;
uint8_t id1, id2;
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x90, bios + 0xAAA);
programmer_delay(10);
id1 = chip_readb(bios);
/* The data sheet says id2 is at (bios + 0x01) and id2 listed in
* flash.h does not match. It should be possible to use JEDEC probe.
*/
id2 = chip_readb(bios + 0x02);
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0xF0, bios + 0xAAA);
programmer_delay(10);
msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 == flash->manufacture_id && id2 == flash->model_id)
return 1;
return 0;
}
int erase_m29f400bt(struct flashchip *flash)
{
chipaddr bios = flash->virtual_memory;
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x80, bios + 0xAAA);
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x10, bios + 0xAAA);
programmer_delay(10);
toggle_ready_jedec(bios);
if (check_erased_range(flash, 0, flash->total_size * 1024)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len)
{
chipaddr bios = flash->virtual_memory;
chipaddr dst = bios + start;
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x80, bios + 0xAAA);
chip_writeb(0xAA, bios + 0xAAA);
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x30, dst);
programmer_delay(10);
toggle_ready_jedec(bios);
if (check_erased_range(flash, start, len)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int address, unsigned int blocklen)
{
if ((address != 0) || (blocklen != flash->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return erase_m29f400bt(flash);
}
int write_m29f400bt(struct flashchip *flash, uint8_t *buf)
{
int i;
int total_size = flash->total_size * 1024;
int page_size = flash->page_size;
chipaddr bios = flash->virtual_memory;
for (i = 0; i < (total_size / page_size) - 1; i++) {
write_page_m29f400bt(bios, buf + i * page_size,
bios + i * page_size, page_size);
}
write_page_m29f400bt(bios, buf + 0x70000, bios + 0x70000, 32 * 1024);
write_page_m29f400bt(bios, buf + 0x78000, bios + 0x78000, 8 * 1024);
write_page_m29f400bt(bios, buf + 0x7a000, bios + 0x7a000, 8 * 1024);
write_page_m29f400bt(bios, buf + 0x7c000, bios + 0x7c000, 16 * 1024);
return 0;
}