openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-27 07:02:34 +02:00
Code Issues Releases Wiki Activity
flashrom/spi25.c
Carl-Daniel Hailfinger cceafa2ad0 Handle the following architectures in generic flashrom code 
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)

No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.

Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.

To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no

Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.

DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.

Corresponding to flashrom svn r1013.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
2010-05-26 01:45:41 +00:00

1032 lines
26 KiB
C
Raw Blame History

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger
* Copyright (C) 2008 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the common SPI chip driver functions
*/
#include <string.h>
#include "flash.h"
#include "flashchips.h"
#include "chipdrivers.h"
#include "spi.h"
void spi_prettyprint_status_register(struct flashchip *flash);
static int spi_rdid(unsigned char *readarr, int bytes)
{
const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID };
int ret;
int i;
ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr);
if (ret)
return ret;
msg_cspew("RDID returned");
for (i = 0; i < bytes; i++)
msg_cspew(" 0x%02x", readarr[i]);
msg_cspew(". ");
return 0;
}
static int spi_rems(unsigned char *readarr)
{
unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 };
uint32_t readaddr;
int ret;
ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr() + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr);
}
if (ret)
return ret;
msg_cspew("REMS returned %02x %02x. ", readarr[0], readarr[1]);
return 0;
}
static int spi_res(unsigned char *readarr)
{
unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 };
uint32_t readaddr;
int ret;
ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr() + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr);
}
if (ret)
return ret;
msg_cspew("RES returned %02x. ", readarr[0]);
return 0;
}
int spi_write_enable(void)
{
const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN };
int result;
/* Send WREN (Write Enable) */
result = spi_send_command(sizeof(cmd), 0, cmd, NULL);
if (result)
msg_cerr("%s failed\n", __func__);
return result;
}
int spi_write_disable(void)
{
const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI };
/* Send WRDI (Write Disable) */
return spi_send_command(sizeof(cmd), 0, cmd, NULL);
}
static int probe_spi_rdid_generic(struct flashchip *flash, int bytes)
{
unsigned char readarr[4];
uint32_t id1;
uint32_t id2;
if (spi_rdid(readarr, bytes))
return 0;
if (!oddparity(readarr[0]))
msg_cdbg("RDID byte 0 parity violation. ");
/* Check if this is a continuation vendor ID */
if (readarr[0] == 0x7f) {
if (!oddparity(readarr[1]))
msg_cdbg("RDID byte 1 parity violation. ");
id1 = (readarr[0] << 8) | readarr[1];
id2 = readarr[2];
if (bytes > 3) {
id2 <<= 8;
id2 |= readarr[3];
}
} else {
id1 = readarr[0];
id2 = (readarr[1] << 8) | readarr[2];
}
msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 == flash->manufacture_id && id2 == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (id1 == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == flash->manufacture_id &&
id1 != 0xff)
return 1;
return 0;
}
int probe_spi_rdid(struct flashchip *flash)
{
return probe_spi_rdid_generic(flash, 3);
}
/* support 4 bytes flash ID */
int probe_spi_rdid4(struct flashchip *flash)
{
/* only some SPI chipsets support 4 bytes commands */
switch (spi_controller) {
#if INTERNAL_SUPPORT == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_ICH7:
case SPI_CONTROLLER_ICH9:
case SPI_CONTROLLER_VIA:
case SPI_CONTROLLER_SB600:
case SPI_CONTROLLER_WBSIO:
#endif
#endif
#if FT2232_SPI_SUPPORT == 1
case SPI_CONTROLLER_FT2232:
#endif
#if DUMMY_SUPPORT == 1
case SPI_CONTROLLER_DUMMY:
#endif
#if BUSPIRATE_SPI_SUPPORT == 1
case SPI_CONTROLLER_BUSPIRATE:
#endif
#if DEDIPROG_SUPPORT == 1
case SPI_CONTROLLER_DEDIPROG:
#endif
return probe_spi_rdid_generic(flash, 4);
default:
msg_cinfo("4b ID not supported on this SPI controller\n");
}
return 0;
}
int probe_spi_rems(struct flashchip *flash)
{
unsigned char readarr[JEDEC_REMS_INSIZE];
uint32_t id1, id2;
if (spi_rems(readarr))
return 0;
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 == flash->manufacture_id && id2 == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (id1 == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == flash->manufacture_id &&
id1 != 0xff)
return 1;
return 0;
}
int probe_spi_res(struct flashchip *flash)
{
unsigned char readarr[3];
uint32_t id2;
const unsigned char allff[] = {0xff, 0xff, 0xff};
const unsigned char all00[] = {0x00, 0x00, 0x00};
/* Check if RDID is usable and does not return 0xff 0xff 0xff or
* 0x00 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) &&
memcmp(readarr, all00, 3)) {
msg_cdbg("Ignoring RES in favour of RDID.\n");
return 0;
}
/* Check if REMS is usable and does not return 0xff 0xff or
* 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) &&
memcmp(readarr, all00, JEDEC_REMS_INSIZE)) {
msg_cdbg("Ignoring RES in favour of REMS.\n");
return 0;
}
if (spi_res(readarr))
return 0;
/* FIXME: Handle the case where RES gives a 2-byte response. */
id2 = readarr[0];
msg_cdbg("%s: id 0x%x\n", __func__, id2);
if (id2 != flash->model_id)
return 0;
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
uint8_t spi_read_status_register(void)
{
const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR };
/* FIXME: No workarounds for driver/hardware bugs in generic code. */
unsigned char readarr[2]; /* JEDEC_RDSR_INSIZE=1 but wbsio needs 2 */
int ret;
/* Read Status Register */
ret = spi_send_command(sizeof(cmd), sizeof(readarr), cmd, readarr);
if (ret)
msg_cerr("RDSR failed!\n");
return readarr[0];
}
/* Prettyprint the status register. Common definitions. */
void spi_prettyprint_status_register_common(uint8_t status)
{
msg_cdbg("Chip status register: Bit 5 / Block Protect 3 (BP3) is "
"%sset\n", (status & (1 << 5)) ? "" : "not ");
msg_cdbg("Chip status register: Bit 4 / Block Protect 2 (BP2) is "
"%sset\n", (status & (1 << 4)) ? "" : "not ");
msg_cdbg("Chip status register: Bit 3 / Block Protect 1 (BP1) is "
"%sset\n", (status & (1 << 3)) ? "" : "not ");
msg_cdbg("Chip status register: Bit 2 / Block Protect 0 (BP0) is "
"%sset\n", (status & (1 << 2)) ? "" : "not ");
msg_cdbg("Chip status register: Write Enable Latch (WEL) is "
"%sset\n", (status & (1 << 1)) ? "" : "not ");
msg_cdbg("Chip status register: Write In Progress (WIP/BUSY) is "
"%sset\n", (status & (1 << 0)) ? "" : "not ");
}
/* Prettyprint the status register. Works for
* ST M25P series
* MX MX25L series
*/
void spi_prettyprint_status_register_st_m25p(uint8_t status)
{
msg_cdbg("Chip status register: Status Register Write Disable "
"(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
msg_cdbg("Chip status register: Bit 6 is "
"%sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
void spi_prettyprint_status_register_sst25(uint8_t status)
{
msg_cdbg("Chip status register: Block Protect Write Disable "
"(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not ");
msg_cdbg("Chip status register: Auto Address Increment Programming "
"(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
/* Prettyprint the status register. Works for
* SST 25VF016
*/
void spi_prettyprint_status_register_sst25vf016(uint8_t status)
{
const char *bpt[] = {
"none",
"1F0000H-1FFFFFH",
"1E0000H-1FFFFFH",
"1C0000H-1FFFFFH",
"180000H-1FFFFFH",
"100000H-1FFFFFH",
"all", "all"
};
spi_prettyprint_status_register_sst25(status);
msg_cdbg("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
void spi_prettyprint_status_register_sst25vf040b(uint8_t status)
{
const char *bpt[] = {
"none",
"0x70000-0x7ffff",
"0x60000-0x7ffff",
"0x40000-0x7ffff",
"all blocks", "all blocks", "all blocks", "all blocks"
};
spi_prettyprint_status_register_sst25(status);
msg_cdbg("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
void spi_prettyprint_status_register(struct flashchip *flash)
{
uint8_t status;
status = spi_read_status_register();
msg_cdbg("Chip status register is %02x\n", status);
switch (flash->manufacture_id) {
case ST_ID:
if (((flash->model_id & 0xff00) == 0x2000) ||
((flash->model_id & 0xff00) == 0x2500))
spi_prettyprint_status_register_st_m25p(status);
break;
case MX_ID:
if ((flash->model_id & 0xff00) == 0x2000)
spi_prettyprint_status_register_st_m25p(status);
break;
case SST_ID:
switch (flash->model_id) {
case 0x2541:
spi_prettyprint_status_register_sst25vf016(status);
break;
case 0x8d:
case 0x258d:
spi_prettyprint_status_register_sst25vf040b(status);
break;
default:
spi_prettyprint_status_register_sst25(status);
break;
}
break;
}
}
int spi_chip_erase_60(struct flashchip *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_60_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_60 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_disable_blockprotect();
if (result) {
msg_cerr("spi_disable_blockprotect failed\n");
return result;
}
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(1000 * 1000);
if (check_erased_range(flash, 0, flash->total_size * 1024)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int spi_chip_erase_c7(struct flashchip *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_C7_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_C7 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_disable_blockprotect();
if (result) {
msg_cerr("spi_disable_blockprotect failed\n");
return result;
}
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution\n", __func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(1000 * 1000);
if (check_erased_range(flash, 0, flash->total_size * 1024)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_52_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_52,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(100 * 1000);
if (check_erased_range(flash, addr, blocklen)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
*/
int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D8_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D8,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(100 * 1000);
if (check_erased_range(flash, addr, blocklen)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
/* Block size is usually
* 4k for PMC
*/
int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D7_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D7,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(100 * 1000);
if (check_erased_range(flash, addr, blocklen)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int spi_chip_erase_d8(struct flashchip *flash)
{
int i, rc = 0;
int total_size = flash->total_size * 1024;
int erase_size = 64 * 1024;
spi_disable_blockprotect();
msg_cinfo("Erasing chip: \n");
for (i = 0; i < total_size / erase_size; i++) {
rc = spi_block_erase_d8(flash, i * erase_size, erase_size);
if (rc) {
msg_cerr("Error erasing block at 0x%x\n", i);
break;
}
}
msg_cinfo("\n");
return rc;
}
/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_SE_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_SE,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(10 * 1000);
if (check_erased_range(flash, addr, blocklen)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
return 0;
}
int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_60(flash);
}
int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_c7(flash);
}
int spi_write_status_enable(void)
{
const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR };
int result;
/* Send EWSR (Enable Write Status Register). */
result = spi_send_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL);
if (result)
msg_cerr("%s failed\n", __func__);
return result;
}
/*
* This is according the SST25VF016 datasheet, who knows it is more
* generic that this...
*/
int spi_write_status_register(int status)
{
int result;
struct spi_command cmds[] = {
{
/* FIXME: WRSR requires either EWSR or WREN depending on chip type. */
.writecnt = JEDEC_EWSR_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_EWSR },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_WRSR_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
}
return result;
}
int spi_byte_program(int addr, uint8_t databyte)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff),
databyte
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
int spi_nbyte_program(int addr, uint8_t *bytes, int len)
{
int result;
/* FIXME: Switch to malloc based on len unless that kills speed. */
unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = {
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr >> 0) & 0xff,
};
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len,
.writearr = cmd,
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
if (!len) {
msg_cerr("%s called for zero-length write\n", __func__);
return 1;
}
if (len > 256) {
msg_cerr("%s called for too long a write\n", __func__);
return 1;
}
memcpy(&cmd[4], bytes, len);
result = spi_send_multicommand(cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
int spi_disable_blockprotect(void)
{
uint8_t status;
int result;
status = spi_read_status_register();
/* If there is block protection in effect, unprotect it first. */
if ((status & 0x3c) != 0) {
msg_cdbg("Some block protection in effect, disabling\n");
result = spi_write_status_register(status & ~0x3c);
if (result) {
msg_cerr("spi_write_status_register failed\n");
return result;
}
}
return 0;
}
int spi_nbyte_read(int address, uint8_t *bytes, int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {
JEDEC_READ,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
};
/* Send Read */
return spi_send_command(sizeof(cmd), len, cmd, bytes);
}
/*
* Read a part of the flash chip.
* Each page is read separately in chunks with a maximum size of chunksize.
*/
int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize)
{
int rc = 0;
int i, j, starthere, lenhere;
int page_size = flash->page_size;
int toread;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
toread = min(chunksize, lenhere - j);
rc = spi_nbyte_read(starthere + j, buf + starthere - start + j, toread);
if (rc)
break;
}
if (rc)
break;
}
return rc;
}
/*
* Write a part of the flash chip.
* Each page is written separately in chunks with a maximum size of chunksize.
*/
int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize)
{
int rc = 0;
int i, j, starthere, lenhere;
/* FIXME: page_size is the wrong variable. We need max_writechunk_size
* in struct flashchip to do this properly. All chips using
* spi_chip_write_256 have page_size set to max_writechunk_size, so
* we're OK for now.
*/
int page_size = flash->page_size;
int towrite;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
towrite = min(chunksize, lenhere - j);
rc = spi_nbyte_program(starthere + j, buf + starthere - start + j, towrite);
if (rc)
break;
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(10);
}
if (rc)
break;
}
return rc;
}
/*
* Program chip using byte programming. (SLOW!)
* This is for chips which can only handle one byte writes
* and for chips where memory mapped programming is impossible
* (e.g. due to size constraints in IT87* for over 512 kB)
*/
int spi_chip_write_1(struct flashchip *flash, uint8_t *buf)
{
int total_size = 1024 * flash->total_size;
int i, result = 0;
spi_disable_blockprotect();
/* Erase first */
msg_cinfo("Erasing flash before programming... ");
if (erase_flash(flash)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
msg_cinfo("done.\n");
for (i = 0; i < total_size; i++) {
result = spi_byte_program(i, buf[i]);
if (result)
return 1;
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(10);
}
return 0;
}
int spi_aai_write(struct flashchip *flash, uint8_t *buf)
{
uint32_t pos = 2, size = flash->total_size * 1024;
unsigned char w[6] = {0xad, 0, 0, 0, buf[0], buf[1]};
int result;
switch (spi_controller) {
#if INTERNAL_SUPPORT == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_WBSIO:
msg_cerr("%s: impossible with Winbond SPI masters,"
" degrading to byte program\n", __func__);
return spi_chip_write_1(flash, buf);
#endif
#endif
default:
break;
}
if (erase_flash(flash)) {
msg_cerr("ERASE FAILED!\n");
return -1;
}
/* FIXME: This will fail on ICH/VIA SPI. */
result = spi_write_enable();
if (result)
return result;
spi_send_command(6, 0, w, NULL);
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(5); /* SST25VF040B Tbp is max 10us */
while (pos < size) {
w[1] = buf[pos++];
w[2] = buf[pos++];
spi_send_command(3, 0, w, NULL);
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
programmer_delay(5); /* SST25VF040B Tbp is max 10us */
}
spi_write_disable();
return 0;
}
Reference in New Issue View Git Blame Copy Permalink