mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-26 22:52:34 +02:00
4b24a2d70b
Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
116 lines
3.7 KiB
C
116 lines
3.7 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright (C) 2010 Andrew Morgan <ziltro@ziltro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#if defined(__i386__) || defined(__x86_64__)
|
|
|
|
#include <stdlib.h>
|
|
#include "flash.h"
|
|
#include "programmer.h"
|
|
#include "hwaccess.h"
|
|
|
|
#define PCI_VENDOR_ID_NATSEMI 0x100b
|
|
|
|
#define BOOT_ROM_ADDR 0x50
|
|
#define BOOT_ROM_DATA 0x54
|
|
|
|
const struct dev_entry nics_natsemi[] = {
|
|
{0x100b, 0x0020, NT, "National Semiconductor", "DP83815/DP83816"},
|
|
{0x100b, 0x0022, NT, "National Semiconductor", "DP83820"},
|
|
|
|
{0},
|
|
};
|
|
|
|
static void nicnatsemi_chip_writeb(const struct flashctx *flash, uint8_t val,
|
|
chipaddr addr);
|
|
static uint8_t nicnatsemi_chip_readb(const struct flashctx *flash,
|
|
const chipaddr addr);
|
|
static const struct par_programmer par_programmer_nicnatsemi = {
|
|
.chip_readb = nicnatsemi_chip_readb,
|
|
.chip_readw = fallback_chip_readw,
|
|
.chip_readl = fallback_chip_readl,
|
|
.chip_readn = fallback_chip_readn,
|
|
.chip_writeb = nicnatsemi_chip_writeb,
|
|
.chip_writew = fallback_chip_writew,
|
|
.chip_writel = fallback_chip_writel,
|
|
.chip_writen = fallback_chip_writen,
|
|
};
|
|
|
|
static int nicnatsemi_shutdown(void *data)
|
|
{
|
|
pci_cleanup(pacc);
|
|
return 0;
|
|
}
|
|
|
|
int nicnatsemi_init(void)
|
|
{
|
|
if (rget_io_perms())
|
|
return 1;
|
|
|
|
io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi);
|
|
|
|
if (register_shutdown(nicnatsemi_shutdown, NULL))
|
|
return 1;
|
|
|
|
/* The datasheet shows address lines MA0-MA16 in one place and MA0-MA15
|
|
* in another. My NIC has MA16 connected to A16 on the boot ROM socket
|
|
* so I'm assuming it is accessible. If not then next line wants to be
|
|
* max_rom_decode.parallel = 65536; and the mask in the read/write
|
|
* functions below wants to be 0x0000FFFF.
|
|
*/
|
|
max_rom_decode.parallel = 131072;
|
|
register_par_programmer(&par_programmer_nicnatsemi, BUS_PARALLEL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nicnatsemi_chip_writeb(const struct flashctx *flash, uint8_t val,
|
|
chipaddr addr)
|
|
{
|
|
OUTL((uint32_t)addr & 0x0001FFFF, io_base_addr + BOOT_ROM_ADDR);
|
|
/*
|
|
* The datasheet requires 32 bit accesses to this register, but it seems
|
|
* that requirement might only apply if the register is memory mapped.
|
|
* Bits 8-31 of this register are apparently don't care, and if this
|
|
* register is I/O port mapped, 8 bit accesses to the lowest byte of the
|
|
* register seem to work fine. Due to that, we ignore the advice in the
|
|
* data sheet.
|
|
*/
|
|
OUTB(val, io_base_addr + BOOT_ROM_DATA);
|
|
}
|
|
|
|
static uint8_t nicnatsemi_chip_readb(const struct flashctx *flash,
|
|
const chipaddr addr)
|
|
{
|
|
OUTL(((uint32_t)addr & 0x0001FFFF), io_base_addr + BOOT_ROM_ADDR);
|
|
/*
|
|
* The datasheet requires 32 bit accesses to this register, but it seems
|
|
* that requirement might only apply if the register is memory mapped.
|
|
* Bits 8-31 of this register are apparently don't care, and if this
|
|
* register is I/O port mapped, 8 bit accesses to the lowest byte of the
|
|
* register seem to work fine. Due to that, we ignore the advice in the
|
|
* data sheet.
|
|
*/
|
|
return INB(io_base_addr + BOOT_ROM_DATA);
|
|
}
|
|
|
|
#else
|
|
#error PCI port I/O access is not supported on this architecture yet.
|
|
#endif
|