openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 22:52:34 +02:00
Code Issues Releases Wiki Activity
flashrom/spi25.c
Stefan Tauner 3c0fcd0f30 Add spi_block_erase_62 
This is used by the AT25F series (only?), but is generic enough to
reside in spi25.c. The only currently supported chip is the AT25F512B.
Other members of that series need some additional infrastructure code,
hence this patch adds the erase function to the AT25F512B only.

Corresponding to flashrom svn r1600.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
2012-09-21 12:46:56 +00:00

1239 lines
32 KiB
C
Raw Blame History

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger
* Copyright (C) 2008 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the common SPI chip driver functions
*/
#include <string.h>
#include "flash.h"
#include "flashchips.h"
#include "chipdrivers.h"
#include "programmer.h"
#include "spi.h"
static int spi_rdid(struct flashctx *flash, unsigned char *readarr, int bytes)
{
static const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID };
int ret;
int i;
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
if (ret)
return ret;
msg_cspew("RDID returned");
for (i = 0; i < bytes; i++)
msg_cspew(" 0x%02x", readarr[i]);
msg_cspew(". ");
return 0;
}
static int spi_rems(struct flashctx *flash, unsigned char *readarr)
{
unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 };
uint32_t readaddr;
int ret;
ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE, cmd,
readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE,
cmd, readarr);
}
if (ret)
return ret;
msg_cspew("REMS returned 0x%02x 0x%02x. ", readarr[0], readarr[1]);
return 0;
}
static int spi_res(struct flashctx *flash, unsigned char *readarr, int bytes)
{
unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 };
uint32_t readaddr;
int ret;
int i;
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
}
if (ret)
return ret;
msg_cspew("RES returned");
for (i = 0; i < bytes; i++)
msg_cspew(" 0x%02x", readarr[i]);
msg_cspew(". ");
return 0;
}
int spi_write_enable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN };
int result;
/* Send WREN (Write Enable) */
result = spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);
if (result)
msg_cerr("%s failed\n", __func__);
return result;
}
int spi_write_disable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI };
/* Send WRDI (Write Disable) */
return spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);
}
static int probe_spi_rdid_generic(struct flashctx *flash, int bytes)
{
const struct flashchip *chip = flash->chip;
unsigned char readarr[4];
uint32_t id1;
uint32_t id2;
if (spi_rdid(flash, readarr, bytes)) {
return 0;
}
if (!oddparity(readarr[0]))
msg_cdbg("RDID byte 0 parity violation. ");
/* Check if this is a continuation vendor ID.
* FIXME: Handle continuation device IDs.
*/
if (readarr[0] == 0x7f) {
if (!oddparity(readarr[1]))
msg_cdbg("RDID byte 1 parity violation. ");
id1 = (readarr[0] << 8) | readarr[1];
id2 = readarr[2];
if (bytes > 3) {
id2 <<= 8;
id2 |= readarr[3];
}
} else {
id1 = readarr[0];
id2 = (readarr[1] << 8) | readarr[2];
}
msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 == chip->manufacture_id && id2 == chip->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff)
return 1;
return 0;
}
int probe_spi_rdid(struct flashctx *flash)
{
return probe_spi_rdid_generic(flash, 3);
}
int probe_spi_rdid4(struct flashctx *flash)
{
/* Some SPI controllers do not support commands with writecnt=1 and
* readcnt=4.
*/
switch (flash->pgm->spi.type) {
#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_IT87XX:
case SPI_CONTROLLER_WBSIO:
msg_cinfo("4 byte RDID not supported on this SPI controller\n");
return 0;
break;
#endif
#endif
default:
return probe_spi_rdid_generic(flash, 4);
}
return 0;
}
int probe_spi_rems(struct flashctx *flash)
{
const struct flashchip *chip = flash->chip;
unsigned char readarr[JEDEC_REMS_INSIZE];
uint32_t id1, id2;
if (spi_rems(flash, readarr)) {
return 0;
}
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 == chip->manufacture_id && id2 == chip->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff)
return 1;
return 0;
}
int probe_spi_res1(struct flashctx *flash)
{
static const unsigned char allff[] = {0xff, 0xff, 0xff};
static const unsigned char all00[] = {0x00, 0x00, 0x00};
unsigned char readarr[3];
uint32_t id2;
/* We only want one-byte RES if RDID and REMS are unusable. */
/* Check if RDID is usable and does not return 0xff 0xff 0xff or
* 0x00 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rdid(flash, readarr, 3) && memcmp(readarr, allff, 3) &&
memcmp(readarr, all00, 3)) {
msg_cdbg("Ignoring RES in favour of RDID.\n");
return 0;
}
/* Check if REMS is usable and does not return 0xff 0xff or
* 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rems(flash, readarr) &&
memcmp(readarr, allff, JEDEC_REMS_INSIZE) &&
memcmp(readarr, all00, JEDEC_REMS_INSIZE)) {
msg_cdbg("Ignoring RES in favour of REMS.\n");
return 0;
}
if (spi_res(flash, readarr, 1)) {
return 0;
}
id2 = readarr[0];
msg_cdbg("%s: id 0x%x\n", __func__, id2);
if (id2 != flash->chip->model_id)
return 0;
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
int probe_spi_res2(struct flashctx *flash)
{
unsigned char readarr[2];
uint32_t id1, id2;
if (spi_res(flash, readarr, 2)) {
return 0;
}
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id)
return 0;
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
uint8_t spi_read_status_register(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR };
/* FIXME: No workarounds for driver/hardware bugs in generic code. */
unsigned char readarr[2]; /* JEDEC_RDSR_INSIZE=1 but wbsio needs 2 */
int ret;
/* Read Status Register */
ret = spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd,
readarr);
if (ret)
msg_cerr("RDSR failed!\n");
return readarr[0];
}
/* Prettyprint the status register. Common definitions. */
void spi_prettyprint_status_register_welwip(uint8_t status)
{
msg_cdbg("Chip status register: Write Enable Latch (WEL) is "
"%sset\n", (status & (1 << 1)) ? "" : "not ");
msg_cdbg("Chip status register: Write In Progress (WIP/BUSY) is "
"%sset\n", (status & (1 << 0)) ? "" : "not ");
}
/* Prettyprint the status register. Common definitions. */
void spi_prettyprint_status_register_bp(uint8_t status, int bp)
{
switch (bp) {
/* Fall through. */
case 4:
msg_cdbg("Chip status register: Block Protect 4 (BP4) "
"is %sset\n", (status & (1 << 5)) ? "" : "not ");
case 3:
msg_cdbg("Chip status register: Block Protect 3 (BP3) "
"is %sset\n", (status & (1 << 5)) ? "" : "not ");
case 2:
msg_cdbg("Chip status register: Block Protect 2 (BP2) "
"is %sset\n", (status & (1 << 4)) ? "" : "not ");
case 1:
msg_cdbg("Chip status register: Block Protect 1 (BP1) "
"is %sset\n", (status & (1 << 3)) ? "" : "not ");
case 0:
msg_cdbg("Chip status register: Block Protect 0 (BP0) "
"is %sset\n", (status & (1 << 2)) ? "" : "not ");
}
}
/* Prettyprint the status register. Unnamed bits. */
void spi_prettyprint_status_register_bit(uint8_t status, int bit)
{
msg_cdbg("Chip status register: Bit %i "
"is %sset\n", bit, (status & (1 << bit)) ? "" : "not ");
}
static void spi_prettyprint_status_register_common(uint8_t status)
{
spi_prettyprint_status_register_bp(status, 3);
spi_prettyprint_status_register_welwip(status);
}
/* Prettyprint the status register. Works for
* ST M25P series
* MX MX25L series
*/
void spi_prettyprint_status_register_st_m25p(uint8_t status)
{
msg_cdbg("Chip status register: Status Register Write Disable "
"(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
msg_cdbg("Chip status register: Bit 6 is "
"%sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
void spi_prettyprint_status_register_sst25(uint8_t status)
{
msg_cdbg("Chip status register: Block Protect Write Disable "
"(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not ");
msg_cdbg("Chip status register: Auto Address Increment Programming "
"(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
/* Prettyprint the status register. Works for
* SST 25VF016
*/
void spi_prettyprint_status_register_sst25vf016(uint8_t status)
{
static const char *const bpt[] = {
"none",
"1F0000H-1FFFFFH",
"1E0000H-1FFFFFH",
"1C0000H-1FFFFFH",
"180000H-1FFFFFH",
"100000H-1FFFFFH",
"all", "all"
};
spi_prettyprint_status_register_sst25(status);
msg_cdbg("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
void spi_prettyprint_status_register_sst25vf040b(uint8_t status)
{
static const char *const bpt[] = {
"none",
"0x70000-0x7ffff",
"0x60000-0x7ffff",
"0x40000-0x7ffff",
"all blocks", "all blocks", "all blocks", "all blocks"
};
spi_prettyprint_status_register_sst25(status);
msg_cdbg("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
int spi_prettyprint_status_register(struct flashctx *flash)
{
const struct flashchip *chip = flash->chip;
uint8_t status;
status = spi_read_status_register(flash);
msg_cdbg("Chip status register is %02x\n", status);
switch (chip->manufacture_id) {
case ST_ID:
if (((chip->model_id & 0xff00) == 0x2000) ||
((chip->model_id & 0xff00) == 0x2500))
spi_prettyprint_status_register_st_m25p(status);
break;
case MACRONIX_ID:
if ((chip->model_id & 0xff00) == 0x2000)
spi_prettyprint_status_register_st_m25p(status);
break;
case SST_ID:
switch (chip->model_id) {
case 0x2541:
spi_prettyprint_status_register_sst25vf016(status);
break;
case 0x8d:
case 0x258d:
spi_prettyprint_status_register_sst25vf040b(status);
break;
default:
spi_prettyprint_status_register_sst25(status);
break;
}
break;
}
return 0;
}
int spi_chip_erase_60(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_60_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_60 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_chip_erase_62(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_62_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_62 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 2-5 s, so wait in 100 ms steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_chip_erase_c7(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_C7_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_C7 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n", __func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_52(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_52_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_52,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
*/
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D8_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D8,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Block size is usually
* 4k for PMC
*/
int spi_block_erase_d7(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D7_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D7,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int spi_block_erase_20(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_SE_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_SE,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_60(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_60(flash);
}
int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_62(flash);
}
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_c7(flash);
}
erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode)
{
switch(opcode){
case 0xff:
case 0x00:
/* Not specified, assuming "not supported". */
return NULL;
case 0x20:
return &spi_block_erase_20;
case 0x52:
return &spi_block_erase_52;
case 0x60:
return &spi_block_erase_60;
case 0xc7:
return &spi_block_erase_c7;
case 0xd7:
return &spi_block_erase_d7;
case 0xd8:
return &spi_block_erase_d8;
default:
msg_cinfo("%s: unknown erase opcode (0x%02x). Please report "
"this at flashrom@flashrom.org\n", __func__, opcode);
return NULL;
}
}
int spi_write_status_enable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR };
int result;
/* Send EWSR (Enable Write Status Register). */
result = spi_send_command(flash, sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL);
if (result)
msg_cerr("%s failed\n", __func__);
return result;
}
/*
* This is according the SST25VF016 datasheet, who knows it is more
* generic that this...
*/
static int spi_write_status_register_flag(struct flashctx *flash, int status, const unsigned char enable_opcode)
{
int result;
int i = 0;
/*
* WRSR requires either EWSR or WREN depending on chip type.
* The code below relies on the fact hat EWSR and WREN have the same
* INSIZE and OUTSIZE.
*/
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ enable_opcode },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_WRSR_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n", __func__);
/* No point in waiting for the command to complete if execution
* failed.
*/
return result;
}
/* WRSR performs a self-timed erase before the changes take effect.
* This may take 50-85 ms in most cases, and some chips apparently
* allow running RDSR only once. Therefore pick an initial delay of
* 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed.
*/
programmer_delay(100 * 1000);
while (spi_read_status_register(flash) & SPI_SR_WIP) {
if (++i > 490) {
msg_cerr("Error: WIP bit after WRSR never cleared\n");
return TIMEOUT_ERROR;
}
programmer_delay(10 * 1000);
}
return 0;
}
int spi_write_status_register(struct flashctx *flash, int status)
{
int feature_bits = flash->chip->feature_bits;
int ret = 1;
if (!(feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) {
msg_cdbg("Missing status register write definition, assuming "
"EWSR is needed\n");
feature_bits |= FEATURE_WRSR_EWSR;
}
if (feature_bits & FEATURE_WRSR_WREN)
ret = spi_write_status_register_flag(flash, status, JEDEC_WREN);
if (ret && (feature_bits & FEATURE_WRSR_EWSR))
ret = spi_write_status_register_flag(flash, status, JEDEC_EWSR);
return ret;
}
int spi_byte_program(struct flashctx *flash, unsigned int addr,
uint8_t databyte)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff),
databyte
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes,
unsigned int len)
{
int result;
/* FIXME: Switch to malloc based on len unless that kills speed. */
unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = {
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr >> 0) & 0xff,
};
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len,
.writearr = cmd,
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
if (!len) {
msg_cerr("%s called for zero-length write\n", __func__);
return 1;
}
if (len > 256) {
msg_cerr("%s called for too long a write\n", __func__);
return 1;
}
memcpy(&cmd[4], bytes, len);
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
/* A generic brute-force block protection disable works like this:
* Write 0x00 to the status register. Check if any locks are still set (that
* part is chip specific). Repeat once.
*/
int spi_disable_blockprotect(struct flashctx *flash)
{
uint8_t status;
int result;
status = spi_read_status_register(flash);
/* If block protection is disabled, stop here. */
if ((status & 0x3c) == 0)
return 0;
msg_cdbg("Some block protection in effect, disabling... ");
result = spi_write_status_register(flash, status & ~0x3c);
if (result) {
msg_cerr("spi_write_status_register failed.\n");
return result;
}
status = spi_read_status_register(flash);
if ((status & 0x3c) != 0) {
msg_cerr("Block protection could not be disabled!\n");
return 1;
}
msg_cdbg("done.\n");
return 0;
}
int spi_nbyte_read(struct flashctx *flash, unsigned int address, uint8_t *bytes,
unsigned int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {
JEDEC_READ,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
};
/* Send Read */
return spi_send_command(flash, sizeof(cmd), len, cmd, bytes);
}
/*
* Read a part of the flash chip.
* FIXME: Use the chunk code from Michael Karcher instead.
* Each page is read separately in chunks with a maximum size of chunksize.
*/
int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len, unsigned int chunksize)
{
int rc = 0;
unsigned int i, j, starthere, lenhere, toread;
unsigned int page_size = flash->chip->page_size;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
toread = min(chunksize, lenhere - j);
rc = spi_nbyte_read(flash, starthere + j, buf + starthere - start + j, toread);
if (rc)
break;
}
if (rc)
break;
}
return rc;
}
/*
* Write a part of the flash chip.
* FIXME: Use the chunk code from Michael Karcher instead.
* Each page is written separately in chunks with a maximum size of chunksize.
*/
int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len, unsigned int chunksize)
{
int rc = 0;
unsigned int i, j, starthere, lenhere, towrite;
/* FIXME: page_size is the wrong variable. We need max_writechunk_size
* in struct flashctx to do this properly. All chips using
* spi_chip_write_256 have page_size set to max_writechunk_size, so
* we're OK for now.
*/
unsigned int page_size = flash->chip->page_size;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
towrite = min(chunksize, lenhere - j);
rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite);
if (rc)
break;
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
if (rc)
break;
}
return rc;
}
/*
* Program chip using byte programming. (SLOW!)
* This is for chips which can only handle one byte writes
* and for chips where memory mapped programming is impossible
* (e.g. due to size constraints in IT87* for over 512 kB)
*/
/* real chunksize is 1, logical chunksize is 1 */
int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len)
{
unsigned int i;
int result = 0;
for (i = start; i < start + len; i++) {
result = spi_byte_program(flash, i, buf[i - start]);
if (result)
return 1;
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
return 0;
}
int default_spi_write_aai(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len)
{
uint32_t pos = start;
int result;
unsigned char cmd[JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE] = {
JEDEC_AAI_WORD_PROGRAM,
};
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_AAI_WORD_PROGRAM_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_AAI_WORD_PROGRAM,
(start >> 16) & 0xff,
(start >> 8) & 0xff,
(start & 0xff),
buf[0],
buf[1]
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
switch (flash->pgm->spi.type) {
#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_IT87XX:
case SPI_CONTROLLER_WBSIO:
msg_perr("%s: impossible with this SPI controller,"
" degrading to byte program\n", __func__);
return spi_chip_write_1(flash, buf, start, len);
#endif
#endif
default:
break;
}
/* The even start address and even length requirements can be either
* honored outside this function, or we can call spi_byte_program
* for the first and/or last byte and use AAI for the rest.
* FIXME: Move this to generic code.
*/
/* The data sheet requires a start address with the low bit cleared. */
if (start % 2) {
msg_cerr("%s: start address not even! Please report a bug at "
"flashrom@flashrom.org\n", __func__);
if (spi_chip_write_1(flash, buf, start, start % 2))
return SPI_GENERIC_ERROR;
pos += start % 2;
cmds[1].writearr = (const unsigned char[]){
JEDEC_AAI_WORD_PROGRAM,
(pos >> 16) & 0xff,
(pos >> 8) & 0xff,
(pos & 0xff),
buf[pos - start],
buf[pos - start + 1]
};
/* Do not return an error for now. */
//return SPI_GENERIC_ERROR;
}
/* The data sheet requires total AAI write length to be even. */
if (len % 2) {
msg_cerr("%s: total write length not even! Please report a "
"bug at flashrom@flashrom.org\n", __func__);
/* Do not return an error for now. */
//return SPI_GENERIC_ERROR;
}
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during start command execution\n",
__func__);
/* FIXME: Should we send WRDI here as well to make sure the chip
* is not in AAI mode?
*/
return result;
}
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
/* We already wrote 2 bytes in the multicommand step. */
pos += 2;
/* Are there at least two more bytes to write? */
while (pos < start + len - 1) {
cmd[1] = buf[pos++ - start];
cmd[2] = buf[pos++ - start];
spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0,
cmd, NULL);
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
/* Use WRDI to exit AAI mode. This needs to be done before issuing any
* other non-AAI command.
*/
spi_write_disable(flash);
/* Write remaining byte (if any). */
if (pos < start + len) {
if (spi_chip_write_1(flash, buf + pos - start, pos, pos % 2))
return SPI_GENERIC_ERROR;
pos += pos % 2;
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink