openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 14:42:36 +02:00
Code Issues Releases Wiki Activity
flashrom/spi25.c
Stefan Tauner 3f5e35db4b Refine PMC Pm25LV series 
- Add missing bits and resort chips
 - Refine Pm25LV512(A) and Pm25LV010
   Due to manufacturer ID continuation this one needs a new probing
   function: probe_spi_res3() which should be refactored in the future.
   The datasheet describes a very weird order of ID bytes:
   Vendor byte, model byte, vendor continuation byte. Let's pretend we did
   not read that or the datasheet is bogus (although the datasheet of the
   successor series describes the same but luckily additionally to RDID).
 - Add Pm25LV010A
   This was tested by Chi Zhang:
   http://paste.flashrom.org/view.php?id=1573

Corresponding to flashrom svn r1670.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
2013-04-19 01:58:33 +00:00

1075 lines
27 KiB
C
Raw Blame History

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger
* Copyright (C) 2008 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the common SPI chip driver functions
*/
#include <string.h>
#include "flash.h"
#include "flashchips.h"
#include "chipdrivers.h"
#include "programmer.h"
#include "spi.h"
static int spi_rdid(struct flashctx *flash, unsigned char *readarr, int bytes)
{
static const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID };
int ret;
int i;
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
if (ret)
return ret;
msg_cspew("RDID returned");
for (i = 0; i < bytes; i++)
msg_cspew(" 0x%02x", readarr[i]);
msg_cspew(". ");
return 0;
}
static int spi_rems(struct flashctx *flash, unsigned char *readarr)
{
unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 };
uint32_t readaddr;
int ret;
ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE, cmd,
readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE,
cmd, readarr);
}
if (ret)
return ret;
msg_cspew("REMS returned 0x%02x 0x%02x. ", readarr[0], readarr[1]);
return 0;
}
static int spi_res(struct flashctx *flash, unsigned char *readarr, int bytes)
{
unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 };
uint32_t readaddr;
int ret;
int i;
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
if (ret == SPI_INVALID_ADDRESS) {
/* Find the lowest even address allowed for reads. */
readaddr = (spi_get_valid_read_addr(flash) + 1) & ~1;
cmd[1] = (readaddr >> 16) & 0xff,
cmd[2] = (readaddr >> 8) & 0xff,
cmd[3] = (readaddr >> 0) & 0xff,
ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
}
if (ret)
return ret;
msg_cspew("RES returned");
for (i = 0; i < bytes; i++)
msg_cspew(" 0x%02x", readarr[i]);
msg_cspew(". ");
return 0;
}
int spi_write_enable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN };
int result;
/* Send WREN (Write Enable) */
result = spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);
if (result)
msg_cerr("%s failed\n", __func__);
return result;
}
int spi_write_disable(struct flashctx *flash)
{
static const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI };
/* Send WRDI (Write Disable) */
return spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);
}
static int probe_spi_rdid_generic(struct flashctx *flash, int bytes)
{
const struct flashchip *chip = flash->chip;
unsigned char readarr[4];
uint32_t id1;
uint32_t id2;
if (spi_rdid(flash, readarr, bytes)) {
return 0;
}
if (!oddparity(readarr[0]))
msg_cdbg("RDID byte 0 parity violation. ");
/* Check if this is a continuation vendor ID.
* FIXME: Handle continuation device IDs.
*/
if (readarr[0] == 0x7f) {
if (!oddparity(readarr[1]))
msg_cdbg("RDID byte 1 parity violation. ");
id1 = (readarr[0] << 8) | readarr[1];
id2 = readarr[2];
if (bytes > 3) {
id2 <<= 8;
id2 |= readarr[3];
}
} else {
id1 = readarr[0];
id2 = (readarr[1] << 8) | readarr[2];
}
msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 == chip->manufacture_id && id2 == chip->model_id)
return 1;
/* Test if this is a pure vendor match. */
if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff)
return 1;
return 0;
}
int probe_spi_rdid(struct flashctx *flash)
{
return probe_spi_rdid_generic(flash, 3);
}
int probe_spi_rdid4(struct flashctx *flash)
{
/* Some SPI controllers do not support commands with writecnt=1 and
* readcnt=4.
*/
switch (flash->pgm->spi.type) {
#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_IT87XX:
case SPI_CONTROLLER_WBSIO:
msg_cinfo("4 byte RDID not supported on this SPI controller\n");
return 0;
break;
#endif
#endif
default:
return probe_spi_rdid_generic(flash, 4);
}
return 0;
}
int probe_spi_rems(struct flashctx *flash)
{
const struct flashchip *chip = flash->chip;
unsigned char readarr[JEDEC_REMS_INSIZE];
uint32_t id1, id2;
if (spi_rems(flash, readarr)) {
return 0;
}
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 == chip->manufacture_id && id2 == chip->model_id)
return 1;
/* Test if this is a pure vendor match. */
if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
return 1;
/* Test if there is any vendor ID. */
if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff)
return 1;
return 0;
}
int probe_spi_res1(struct flashctx *flash)
{
static const unsigned char allff[] = {0xff, 0xff, 0xff};
static const unsigned char all00[] = {0x00, 0x00, 0x00};
unsigned char readarr[3];
uint32_t id2;
/* We only want one-byte RES if RDID and REMS are unusable. */
/* Check if RDID is usable and does not return 0xff 0xff 0xff or
* 0x00 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rdid(flash, readarr, 3) && memcmp(readarr, allff, 3) &&
memcmp(readarr, all00, 3)) {
msg_cdbg("Ignoring RES in favour of RDID.\n");
return 0;
}
/* Check if REMS is usable and does not return 0xff 0xff or
* 0x00 0x00. In that case, RES is pointless.
*/
if (!spi_rems(flash, readarr) &&
memcmp(readarr, allff, JEDEC_REMS_INSIZE) &&
memcmp(readarr, all00, JEDEC_REMS_INSIZE)) {
msg_cdbg("Ignoring RES in favour of REMS.\n");
return 0;
}
if (spi_res(flash, readarr, 1)) {
return 0;
}
id2 = readarr[0];
msg_cdbg("%s: id 0x%x\n", __func__, id2);
if (id2 != flash->chip->model_id)
return 0;
return 1;
}
int probe_spi_res2(struct flashctx *flash)
{
unsigned char readarr[2];
uint32_t id1, id2;
if (spi_res(flash, readarr, 2)) {
return 0;
}
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id)
return 0;
return 1;
}
int probe_spi_res3(struct flashctx *flash)
{
unsigned char readarr[3];
uint32_t id1, id2;
if (spi_res(flash, readarr, 3)) {
return 0;
}
id1 = (readarr[0] << 8) | readarr[1];
id2 = readarr[2];
msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);
if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id)
return 0;
return 1;
}
/* Only used for some Atmel chips. */
int probe_spi_at25f(struct flashctx *flash)
{
static const unsigned char cmd[AT25F_RDID_OUTSIZE] = { AT25F_RDID };
unsigned char readarr[AT25F_RDID_INSIZE];
uint32_t id1;
uint32_t id2;
if (spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, readarr))
return 0;
id1 = readarr[0];
id2 = readarr[1];
msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);
if (id1 == flash->chip->manufacture_id && id2 == flash->chip->model_id)
return 1;
return 0;
}
int spi_chip_erase_60(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_60_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_60 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_chip_erase_62(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_62_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_62 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n",
__func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 2-5 s, so wait in 100 ms steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_chip_erase_c7(struct flashctx *flash)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_CE_C7_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_CE_C7 },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution\n", __func__);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
/* FIXME: We assume spi_read_status_register will never fail. */
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1000 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_52(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_52_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_52,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
*/
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D8_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D8,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Block size is usually
* 4k for PMC
*/
int spi_block_erase_d7(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BE_D7_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_D7,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(100 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int spi_block_erase_20(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_SE_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_SE,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_50(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
/* .writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, { */
.writecnt = JEDEC_BE_50_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_50,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 10 ms, so wait in 1 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
int result;
struct spi_command cmds[] = {
{
/* .writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, { */
.writecnt = JEDEC_BE_81_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BE_81,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff)
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr);
return result;
}
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 8 ms, so wait in 1 ms steps.
*/
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(1 * 1000);
/* FIXME: Check the status register for errors. */
return 0;
}
int spi_block_erase_60(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_60(flash);
}
int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_62(flash);
}
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{
if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
msg_cerr("%s called with incorrect arguments\n",
__func__);
return -1;
}
return spi_chip_erase_c7(flash);
}
erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode)
{
switch(opcode){
case 0xff:
case 0x00:
/* Not specified, assuming "not supported". */
return NULL;
case 0x20:
return &spi_block_erase_20;
case 0x52:
return &spi_block_erase_52;
case 0x60:
return &spi_block_erase_60;
case 0xc7:
return &spi_block_erase_c7;
case 0xd7:
return &spi_block_erase_d7;
case 0xd8:
return &spi_block_erase_d8;
default:
msg_cinfo("%s: unknown erase opcode (0x%02x). Please report "
"this at flashrom@flashrom.org\n", __func__, opcode);
return NULL;
}
}
int spi_byte_program(struct flashctx *flash, unsigned int addr,
uint8_t databyte)
{
int result;
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr & 0xff),
databyte
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes,
unsigned int len)
{
int result;
/* FIXME: Switch to malloc based on len unless that kills speed. */
unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = {
JEDEC_BYTE_PROGRAM,
(addr >> 16) & 0xff,
(addr >> 8) & 0xff,
(addr >> 0) & 0xff,
};
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len,
.writearr = cmd,
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
if (!len) {
msg_cerr("%s called for zero-length write\n", __func__);
return 1;
}
if (len > 256) {
msg_cerr("%s called for too long a write\n", __func__);
return 1;
}
memcpy(&cmd[4], bytes, len);
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during command execution at address 0x%x\n",
__func__, addr);
}
return result;
}
int spi_nbyte_read(struct flashctx *flash, unsigned int address, uint8_t *bytes,
unsigned int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {
JEDEC_READ,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
};
/* Send Read */
return spi_send_command(flash, sizeof(cmd), len, cmd, bytes);
}
/*
* Read a part of the flash chip.
* FIXME: Use the chunk code from Michael Karcher instead.
* Each page is read separately in chunks with a maximum size of chunksize.
*/
int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len, unsigned int chunksize)
{
int rc = 0;
unsigned int i, j, starthere, lenhere, toread;
unsigned int page_size = flash->chip->page_size;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
toread = min(chunksize, lenhere - j);
rc = spi_nbyte_read(flash, starthere + j, buf + starthere - start + j, toread);
if (rc)
break;
}
if (rc)
break;
}
return rc;
}
/*
* Write a part of the flash chip.
* FIXME: Use the chunk code from Michael Karcher instead.
* Each page is written separately in chunks with a maximum size of chunksize.
*/
int spi_write_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len, unsigned int chunksize)
{
int rc = 0;
unsigned int i, j, starthere, lenhere, towrite;
/* FIXME: page_size is the wrong variable. We need max_writechunk_size
* in struct flashctx to do this properly. All chips using
* spi_chip_write_256 have page_size set to max_writechunk_size, so
* we're OK for now.
*/
unsigned int page_size = flash->chip->page_size;
/* Warning: This loop has a very unusual condition and body.
* The loop needs to go through each page with at least one affected
* byte. The lowest page number is (start / page_size) since that
* division rounds down. The highest page number we want is the page
* where the last byte of the range lives. That last byte has the
* address (start + len - 1), thus the highest page number is
* (start + len - 1) / page_size. Since we want to include that last
* page as well, the loop condition uses <=.
*/
for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
/* Byte position of the first byte in the range in this page. */
/* starthere is an offset to the base address of the chip. */
starthere = max(start, i * page_size);
/* Length of bytes in the range in this page. */
lenhere = min(start + len, (i + 1) * page_size) - starthere;
for (j = 0; j < lenhere; j += chunksize) {
towrite = min(chunksize, lenhere - j);
rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite);
if (rc)
break;
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
if (rc)
break;
}
return rc;
}
/*
* Program chip using byte programming. (SLOW!)
* This is for chips which can only handle one byte writes
* and for chips where memory mapped programming is impossible
* (e.g. due to size constraints in IT87* for over 512 kB)
*/
/* real chunksize is 1, logical chunksize is 1 */
int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len)
{
unsigned int i;
int result = 0;
for (i = start; i < start + len; i++) {
result = spi_byte_program(flash, i, buf[i - start]);
if (result)
return 1;
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
return 0;
}
int default_spi_write_aai(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len)
{
uint32_t pos = start;
int result;
unsigned char cmd[JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE] = {
JEDEC_AAI_WORD_PROGRAM,
};
struct spi_command cmds[] = {
{
.writecnt = JEDEC_WREN_OUTSIZE,
.writearr = (const unsigned char[]){ JEDEC_WREN },
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = JEDEC_AAI_WORD_PROGRAM_OUTSIZE,
.writearr = (const unsigned char[]){
JEDEC_AAI_WORD_PROGRAM,
(start >> 16) & 0xff,
(start >> 8) & 0xff,
(start & 0xff),
buf[0],
buf[1]
},
.readcnt = 0,
.readarr = NULL,
}, {
.writecnt = 0,
.writearr = NULL,
.readcnt = 0,
.readarr = NULL,
}};
switch (flash->pgm->spi.type) {
#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_IT87XX:
case SPI_CONTROLLER_WBSIO:
msg_perr("%s: impossible with this SPI controller,"
" degrading to byte program\n", __func__);
return spi_chip_write_1(flash, buf, start, len);
#endif
#endif
default:
break;
}
/* The even start address and even length requirements can be either
* honored outside this function, or we can call spi_byte_program
* for the first and/or last byte and use AAI for the rest.
* FIXME: Move this to generic code.
*/
/* The data sheet requires a start address with the low bit cleared. */
if (start % 2) {
msg_cerr("%s: start address not even! Please report a bug at "
"flashrom@flashrom.org\n", __func__);
if (spi_chip_write_1(flash, buf, start, start % 2))
return SPI_GENERIC_ERROR;
pos += start % 2;
cmds[1].writearr = (const unsigned char[]){
JEDEC_AAI_WORD_PROGRAM,
(pos >> 16) & 0xff,
(pos >> 8) & 0xff,
(pos & 0xff),
buf[pos - start],
buf[pos - start + 1]
};
/* Do not return an error for now. */
//return SPI_GENERIC_ERROR;
}
/* The data sheet requires total AAI write length to be even. */
if (len % 2) {
msg_cerr("%s: total write length not even! Please report a "
"bug at flashrom@flashrom.org\n", __func__);
/* Do not return an error for now. */
//return SPI_GENERIC_ERROR;
}
result = spi_send_multicommand(flash, cmds);
if (result) {
msg_cerr("%s failed during start command execution\n",
__func__);
/* FIXME: Should we send WRDI here as well to make sure the chip
* is not in AAI mode?
*/
return result;
}
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
/* We already wrote 2 bytes in the multicommand step. */
pos += 2;
/* Are there at least two more bytes to write? */
while (pos < start + len - 1) {
cmd[1] = buf[pos++ - start];
cmd[2] = buf[pos++ - start];
spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0,
cmd, NULL);
while (spi_read_status_register(flash) & SPI_SR_WIP)
programmer_delay(10);
}
/* Use WRDI to exit AAI mode. This needs to be done before issuing any
* other non-AAI command.
*/
spi_write_disable(flash);
/* Write remaining byte (if any). */
if (pos < start + len) {
if (spi_chip_write_1(flash, buf + pos - start, pos, pos % 2))
return SPI_GENERIC_ERROR;
pos += pos % 2;
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink