openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 22:52:34 +02:00
Code Issues Releases Wiki Activity

buspirate: Add option for setting the aux pin

Browse Source 
This adds a parameter to drive the aux pin low (or high if you
explicitly want the previous behavior). Some boards need to have a reset
pin driven low before the firmware can be safely flashed. With the Bus
Pirate, this is most easily done with the auxiliary pin.

Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/43608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
This commit is contained in:
Sean Anderson 2020-07-20 08:27:45 -04:00 committed by Anastasia Klimchuk
parent 5b2716d99c
commit 6537d40e31
2 changed files with 28 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
buspirate_spi.c
View File

@ -327,6 +327,7 @@ static int buspirate_spi_init(const struct programmer_cfg *cfg)
int ret = 0;
bool pullup = false;
bool psu = false;
bool aux = true;
unsigned char *bp_commbuf;
int bp_commbufsize;
@ -389,6 +390,17 @@ static int buspirate_spi_init(const struct programmer_cfg *cfg)
}
free(tmp);
tmp = extract_programmer_param_str(cfg, "aux");
if (tmp) {
if (strcasecmp("high", tmp) == 0)
; /* Default */
else if (strcasecmp("low", tmp) == 0)
aux = false;
else
msg_perr("Invalid AUX state, driving high by default.\n");
}
free(tmp);
/* Default buffer size is 19: 16 bytes data, 3 bytes control. */
#define DEFAULT_BUFSIZE (16 + 3)
bp_commbuf = malloc(DEFAULT_BUFSIZE);
@ -642,8 +654,8 @@ static int buspirate_spi_init(const struct programmer_cfg *cfg)
goto init_err_cleanup_exit;
}
/* Initial setup (SPI peripherals config): Enable power, CS high, AUX */
bp_commbuf[0] = 0x40 | 0x0b;
/* Initial setup (SPI peripherals config): Enable power, CS high */
bp_commbuf[0] = 0x40 | 0x09;
if (pullup) {
bp_commbuf[0] |= (1 << 2);
msg_pdbg("Enabling pull-up resistors.\n");
@ -652,6 +664,12 @@ static int buspirate_spi_init(const struct programmer_cfg *cfg)
bp_commbuf[0] |= (1 << 3);
msg_pdbg("Enabling PSUs.\n");
}
if (aux) {
bp_commbuf[0] |= (1 << 1);
msg_pdbg("Driving AUX high.\n");
} else {
msg_pdbg("Driving AUX low.\n");
}
ret = buspirate_sendrecv(bp_commbuf, 1, 1);
if (ret)
goto init_err_cleanup_exit;

8
doc/classic_cli_manpage.rst
View File

@ -780,6 +780,14 @@ where ``state`` can be ``on`` or ``off``.
This allows the bus pirate to power the ROM chip directly. This may also be used to provide the required pullup voltage
(when using the **pullups** option), by connecting the Bus Pirate's Vpu input to the appropriate Vcc pin.
An optional aux parameter specifies the state of the Bus Pirate auxiliary pin.
This may be used to drive the auxiliary pin high or low before a transfer.
Syntax is::
flashrom -p buspirate_spi:aux=state
where ``state`` can be ``high`` or ``low``. The default ``state`` is ``high``.
pickit2_spi programmer
^^^^^^^^^^^^^^^^^^^^^^