REed by roxfan and Michael Karcher, patch by Stefan Tauner.
Corresponding to flashrom svn r1653.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Once upon a time usbdev_status was created for the ft2232
programmer. Its IDs are semantically different to pcidev_status
because they indicate USB instead of PCI IDs, but apart from that
both data structures are equal. This change makes life easier for
everything involved in handling and printing the status of devices
that is noted in those structures by combining them into dev_entry.
It is still possible to distinguish between PCI and USB devices
indirectly by using the struct programmer's type field.
Also, add a programmer column to the PCI and USB devices lists.
Corresponding to flashrom svn r1632.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
To be able to get rid of lots of #ifdefs and centralize programmer-specific
data more...
- introduce two new fields to struct programmer_entry, namely
enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status
or char *note).
- use those fields to generate device listings in print.c and print_wiki.c.
Bonus: add printing of USB devices to print_wiki.c and count supported PCI
and USB devices.
Corresponding to flashrom svn r1631.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
More clear "variable" names, better explanation if no programmer is selected etc.
Corresponding to flashrom svn r1624.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
IDs are from the host bridge and LPC controller. The enable function
was reverse engineered by roxfan, thanks!
User mezzo vanished without reporting any test results.
Corresponding to flashrom svn r1622.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Propagate the error code using return values instead, but let cli_classic.c
still decide the ultimate return value of the process.
Also, remove setting the ret value again after print_supported_wiki() -
success is the default.
Corresponding to flashrom svn r1614.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It's the same as for the Neo2.
Thanks to roxfan and twice11 who did the RE!
Corresponding to flashrom svn r1597.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jud Porter
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Based on http://patchwork.coreboot.org/patch/2881/ but with
the right pin (i.e. 16) according to Joshua Roys.
Corresponding to flashrom svn r1596.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We made a first step into this direction in r1405, but failed to
notice that there was already an extended patch by Jonathan which
was refined to become this one.
Allows the removal of board_shuttle_fn25 (which was also intended to be
used on the ASUS A8N-SLI Deluxe, but this was never tested).
Corresponding to flashrom svn r1593.
A previous iteration was tested on CK804 and
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
which was then
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Rebasing, refining and making errors non-fatal is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
http://www.ajawe.pl/ajawe0208.htmhttp://www.ajawe.pl/files/0208_R_DOK.pdf
Corresponding to flashrom svn r1590.
First version was
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Refinements and general cleanup is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1581.
Based on http://patchwork.coreboot.org/patch/2983/
Signed-off-by: Tadas Slotkus <devtadas@gmail.com>
PCI IDs are generic therefore requiring manual activation.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but
that would not be a good choice for ID. So autodetection has been disabled
and the user needs to specify -p internal:mainboard=biostar:m7viq instead.
Corresponding to flashrom svn r1566.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.
Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
These are used in ASUS RS120-E5/PA2 servers.
GPIO pin discovered, patch prepared and
Tested-by: Geoffrey McRae
Corresponding to flashrom svn r1526.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on Bifferboard.
Corresponding to flashrom svn r1489.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously only the generic "unknown XXXX SPI chips" were ignored (because their
name started with "unknown".
This patch adds also all chips whose vendor starts with "Unknown" (none so far)
and "Programmer" (currently used by the opaque flash chip framework) .
A patch will add the SFDP chip template with an "Unknown" vendor field later.
Rationale: these entries do not contain any useful information when shown in -L
or wiki output. It would be better to add them to a general feature section or similar.
Corresponding to flashrom svn r1488.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds a generic phase 2 board enable that does nothing but set
is_laptop to 0 to circumvent an erroneous laptop detection due to ambigous
DMI chassis information.
Corresponding to flashrom svn r1487.
Signed-off-by: Ingo Feldschmid <ifel@msc-ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Typical AWARD enable structure with an ICH GPIO board enable.
This board seems also to be known as D2544-B1.
Success report:
http://www.flashrom.org/pipermail/flashrom/2012-January/008590.html
Corresponding to flashrom svn r1486.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Oliver Rath <rath@mglug.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move Asus A8Jm, Asus M6Ne to the laptop section.
No working URL for the A8Jm found.
Corresponding to flashrom svn r1472.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Paul with some polishing by Stefan.
Success log:
http://www.flashrom.org/pipermail/flashrom/2011-November/008257.html
Corresponding to flashrom svn r1468.
Signed-off-by: Joshua Roys <roysjosh at gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Stefan.
Request:
http://www.flashrom.org/pipermail/flashrom/2011-November/008241.html
Success report:
http://paste.flashrom.org/view.php?id=914
Corresponding to flashrom svn r1467.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Mugendai <mugendai42@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This looks suspiciously like intel_ich_gpio_set.
Based on that, add board enables for the ASUS P5N-D and P5N-E SLI.
This was tested by Guillaume Poirier-Morency on a P5N-D:
http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html
Corresponding to flashrom svn r1466.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Small changes were also contributed and
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Changes related to P5GD1 variants:
- Reorder "P5GD1 Pro" in print.c and include a DMI patter to its board enable
- Add an untested "P5GD1(-VM)" board enable and add an entry to print.c
- Add P5GD1-VM/S variant as reported by "Limer"
Changes related to P5GD(2/C) variants:
- Fix the name of "P5GDC-V Deluxe" board enable and add a DMI pattern and
print.c entry. NB: there is no "P5GDC-V" board.
- Add a generic match for P5GD(2/C)* boards with a not tested tag.
This are the potential targets for this according to the asus ftp:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/
Unsupported variants of the P5GD2:
P5GD2, P5GD2 Deluxe, P5GD2 Pro, P5GD2-X
(P5GD2 Premium is already tested)
(there seems to be also a P5GD2-TVM/GB/SI in the wild, which is not known to
asus :)
Unsupported variants of the P5GDC:
P5GDC Pro, P5GDC-MX
(P5GDC Deluxe and P5GDC-V Deluxe are already tested)
References:
P5GD1 PRO (dmi "P5GD1 PRO")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, *0x814e*
http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html
P5GD1 (dmi "P5GD1")
The non-pro version seems to match the pro pci pattern, but could be
distinguished by the SATA ID of 1043:2604 vs. 1043:2601:
https://launchpadlibrarian.net/62167576/Lspci.txt
or a DMI pattern of course.
P5GD1-VM (dmi "P5GD1-VM")
This does also match the current PCI IDs.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/465379
- P5GD2 Premium (dmi "P5GD2-Premium")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-August/004555.html
- P5GDC-V Deluxe (dmi "P5GDC-V")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004939.html
- P5GDC Deluxe (dmi "P5GDC")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004684.html
- P5GDC Pro, P5GDC-MX, P5GD2-X, P5GD2 Pro, P5GD2
no useful logs found
- P5GD2-Deluxe (dmi "P5GD2-Deluxe")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/572514
- P5GD2-TVM/GB/SI (dmi "P5GD2-TVM/GB/SI")
smbus: 0x8086, 0x266a, 0x1043, 0x266a; audio: 0x8086, 0x2668, 0x1043, *0x81a7*
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/462500
Corresponding to flashrom svn r1457.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
and due to the tremendous interest... ;)
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I disassembled the write enable and the write disable functions from
the Award BIOS image and reconstructed C code to understand for
myself what happens. For details see:
http://www.flashrom.org/pipermail/flashrom/2011-October/008033.html
I compared the download pages of both, abit AV8 and abit AV8-3rd Eye,
and the BIOS downloads are the same. So it's save to assume that this
board enable works on both versions. Tested on AV8.
Corresponding to flashrom svn r1455.
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Besides adding output for the voltage ranges, this patch also changes
various aspects of the -L output:
- sizes are right aligned now with a fixed length of 5
- space between columns is selectable with a constant
- test results are always shown in the same column ("PR" and " R"
instead of "PR" and "R ")
- vendor and device names are split on a delimiter (currently '/') and
spread over mutliple lines but only if the tokens are not too short.
all other columns are printed on the first line of a chip.
- voltage ranges are printed in verbose mode only
it also gets rid of POS_PRINT and digits
Corresponding to flashrom svn r1438.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Based on the REing of Michael Karcher and a good guess of Idwer Vollering.
Corresponding to flashrom svn r1419.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Leon Zhang <leoncamel at gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html
Tested-by: medhi <nefkongo@hotmail.com>
http://paste.flashrom.org/view.php?id=779
Acked-by: Idwer Vollering <vidwer@gmail.com>
