The feature will have patches coming soon and not completely
ideal yet.
At the moment, read and verify operations can show progress,
erase and write are not completely ready yet.
Change-Id: I9cacc60cb357c29f6625126d22a67a56de560887
Signed-off-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/75439
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently, the code assumes the nCS pin of spi nor flash is connected to
either nRESET(pin 15) or nTRST(pin 3). But it is incompatible with the
pinout from official JFlash SPI, whereas the nCS pin is wired to TMS(pin
7).
This commit adds cs=tms option to share the same pinout as JFlash SPI.
It works by toggling TMS in assert_cs and deassert_cs, and sets TMS to
zero in jlink_spi_send_command. The default option is set to cs=reset
for backward compatibility.
Tested on macOS 13.3.1 with JLink and Winbond W25Q128
Change-Id: I0cb467fcc2c403a25f260462de0cd020e7022bb1
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/75011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
This adds a parameter to drive the aux pin low (or high if you
explicitly want the previous behavior). Some boards need to have a reset
pin driven low before the firmware can be safely flashed. With the Bus
Pirate, this is most easily done with the auxiliary pin.
Change-Id: Ieeecfdf1afc06dadda9b8f99547cd74854ca6775
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/43608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Thomas Heijligen <src@posteo.de>
Use sphinx (sphinx-doc.org) to generate the UNIX man page from an
reStructuredText file instead of dealing with plain groff.
Use `meson setup -Dman-pages=enabled` to build the man page, and
`meson setup -Ddocumentation=enabled` to build the web documentation
explicitly. Both are enabled automatically if sphinx-build is found.
The man page will be installed as `<meson_mandir>/man8/flashrom.8` and
The html documentation in <meson_datadir>/doc/flashrom/html`.
The Makefile builds only the man-page format.
Increase the minimum version of meson from 0.53.0 to 0.57.0 to be
able to pass environment variables to the custom_target() command. That
is needed to pass the FLASHROM_VERSION to the documentation.
Change-Id: Iee9f1164c5913e47385e6f7d51dc7775a58b5a67
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/72619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-by: Alexander Goncharov <chat@joursoir.net>
