* serprog.h doesn't exist, so refer to .c source instead
* in the doc, no other command has S_CMD_ prefix either
Change-Id: Ic83e7fd80840f2db0b006935a964721da0388068
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/80499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This allowed me to let the clips remain attached on my D946GZIS while
playing with coreboot/serialice.
Corresponding to flashrom svn r1618.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1617.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Introduce a new opcode (0x14) that sends the requested frequency as a 32b
long value in Hertz to the programmer and receives the frequency eventually
chosen by the programmer. The user can specify this with the programmer
parameter "spispeed" (named after the similar parameter for the buspirate)
including an optional suffix of 'M' or 'k' for specifying megahertz or kilohertz
respectively (lowercase suffixes are also accepted).
Thanks to Idwer and Uwe (and maybe others) for their feedback especially
regarding the unit of frequency to use.
Corresponding to flashrom svn r1571.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move the serprog specification there and document a few things we could not
figure out on intel platforms yet.
Corresponding to flashrom svn r1465.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
