openwrt/flashrom
1
0
Fork 0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 22:52:34 +02:00
Code Issues Releases Wiki Activity

serprog: clean up documentation

Browse Source 
* serprog.h doesn't exist, so refer to .c source instead
* in the doc, no other command has S_CMD_ prefix either

Change-Id: Ic83e7fd80840f2db0b006935a964721da0388068
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/80499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
This commit is contained in:
Riku Viitanen 2024-01-15 20:10:40 +02:00 committed by Anastasia Klimchuk
parent e8c350f55e
commit f5ca2dbf7f
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/serprog-protocol.txt
View File

@ -84,7 +84,7 @@ Additional information of the above commands:
lower than the one requested. If there is no lower frequency
available the lowest possible should be used. The value
chosen is sent back in the reply with an ACK.
0x15 (S_CMD_S_PIN_STATE):
0x15 (S_PIN_STATE):
Sets the state of the pin drivers connected to the flash chip. Disabling them allows other
devices (e.g. a mainboard's chipset) to access the chip. This way the serprog controller can
remain attached to the flash chip even when the board is running. The user is responsible to
@ -103,4 +103,4 @@ Additional information of the above commands:
In addition, support for these commands is recommended:
S_CMD_Q_PGMNAME, S_CMD_Q_BUSTYPE, S_CMD_Q_CHIPSIZE (if parallel).
See also serprog.h.
See also serprog.c