This includes:
Bottom boot block:
* 16Mb/2MB:
QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8
* 32Mb/4MB:
QB25F320S33B8, QH25F320S33B8
* 64Mb/8MB:
QB25F640S33B8, QH25F640S33B8
Top boot block:
* 16Mb/2MB:
QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8
* 32Mb/4MB:
QB25F320S33T8, QH25F320S33T8
* 64Mb/8MB:
QB25F640S33T8, QH25F640S33T8
At least some seem to be marketed by other vendors (too?) but also with
Intel's vendor ID.
Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they
support also erasing the top/bottom 8 8kB blocks with opcode 0x40.
But since this command fails for all addresses outside those ranges,
it is not easily implemented with flashrom's current code base and
hence left out.
Corresponding to flashrom svn r1636.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Move all functions related to SPI status registers to a new file
spi25_statusreg.c. This includes the generic as well as the
SST-specific functions from spi25.c and the chip-specific functions
from a25.c and at25.c.
- introduce helper functions
* spi_prettyprint_status_register_hex()
* spi_prettyprint_status_register_bpl()
* spi_prettyprint_status_register_plain()
Use the latter on every compatible flash chip that has no better printlock
function set and get rid of the implicit pretty printing in the SPI probing
functions.
- remove
* spi_prettyprint_status_register_common()
* spi_prettyprint_status_register_amic_a25lq032() because it can be fully
substituted with spi_prettyprint_status_register_amic_a25l032().
* spi_prettyprint_status_register() (old switch, no longer needed)
- promote and export
* spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1().
* spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2().
* spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3().
- add #define TEST_BAD_REW and use it for a number of Atmel chips which
had only TEST_BAD_READ set even though they dont have erasers or a write
function set.
Corresponding to flashrom svn r1634.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks.
W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks.
W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks.
The W39F010 code was tested with a satasii programmer. The first write
attempt after an erase returned with verify failure, but the second
write attempt was succesful:
http://paste.flashrom.org/view.php?id=1418
Corresponding to flashrom svn r1620.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Wicked chip: No WRSR, no write enable command (but swallows our
default one without a problem), supports an auto-erasing page write
(but even without that page writes are recommended to write the
whole page i.e. operate on a completely erased page), mad
requirements on block refreshments if only partly written.
Found on my Intel D946GZIS and tested with my serprog in situ.
Using the page write by setting JEDEC_BYTE_PROGRAM to 0x11 and using
the spi_chip_write_256 command greatly improves performance and works
flawlessly.
Corresponding to flashrom svn r1616.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The 32Mb version has 1.8V and 3.0V versions, the smaller one 1.8V only
(or Numonyx/Micron forgot to publish it). Another difference is that the
16Mb chip has 32 kB subsectors (erase opcode 0x52). As long as there
are no funky configurations like for the 128Mb chips, we got the smaller
parts covered with this change.
Corresponding to flashrom svn r1615.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch differentiates between the N25Q064 1.8V version and 3.0V
version which have different JEDEC IDs.
It extends the chip name to include more characters of the part
number. The first two of those characters indicate the process
technology (65nm) and feature set (hold pin etc.), neither of which
matter for flashrom at the moment. The third and fourth characters
specify voltage and block/sector size and uniformity, which are
important and hence included.
To abstract the irrelevant portions of the part number leading up to
the characters we care about, dots are used. This helps prevent
unwanted changes in chip name that can break fragile scripts and
confuse people. More about this schema here:
http://www.flashrom.org/pipermail/flashrom/2012-July/009595.html
Corresponding to flashrom svn r1612.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This includes SST25WF512, SST25WF010, SST25WF020 and SST25WF040.
They require a VCC of 1.65 - 1.95V, which is why i could not test them.
The SOIC version of the SST25WF512 is used on an AMD X300-based
graphics card i own.
Corresponding to flashrom svn r1611.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is used by the AT25F series (only?), but is generic enough to
reside in spi25.c. The only currently supported chip is the AT25F512B.
Other members of that series need some additional infrastructure code,
hence this patch adds the erase function to the AT25F512B only.
Corresponding to flashrom svn r1600.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is the low power version (vendor,device = 0xc8,0x6016) of
GD25Q32 (0xc8,0x4016) which matches that of W25Q32 (0xef,0x4016) and
W25Q32DW (0xef,0x6016). All their datasheets look pretty much the
same with respect to commands, erase blocks, etc.
Stolen from chromiumos:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=9a0051f0ba0b67af6f08e052c31cba3e9dbbbdbf
Corresponding to flashrom svn r1598.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Its ID was spotted in an ICH descriptor region update by Jetway:
http://paste.flashrom.org/view.php?id=1217 and is used on ASUS P8B75-V
boards according to some forum posts (2 chips per board actually).
No datasheet was found, so most values are just guessed from the EN25F32.
Corresponding to flashrom svn r1594.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The AT25F512B is quite different from the other (older and yet
unsupported) chips in the AT25F* familiy, hence rename 512B-specific
stuff to make room for the generic AT25F* code.
Corresponding to flashrom svn r1583.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, alter the page size of the other family members to indicate that it is
unused. Maybe this accelerates the deletion of this field... haha.
Corresponding to flashrom svn r1572.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This flash is like PMC model Pm39LV010 but capacity is 64kB.
Model ID was already defined. PREW works for me.
Corresponding to flashrom svn r1539.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Its ID was spotted in an descriptor region update by Jetway:
http://paste.flashrom.org/view.php?id=1217
Corresponding to flashrom svn r1535.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All SPI chips without a WRSR feature bit set were evaluated except the
Sanyo LF25FW203A for which no datasheet is available.
The following list includes all SPI-capable chips that still have no
WRSR feature bit set:
- AT26DF041
- AT45CS1282
- AT45DB011D
- AT45DB021D
- AT45DB041D
- AT45DB081D
- AT45DB161D
- AT45DB321C
- AT45DB321D
- AT45DB642D
All of them have no write function set and can be therefore ignored
for now.
Apart from those the generic chips are also not tagged. The opaque
flash interface should not be affected. The SFDP dummy chip is
changed to explicitly set EWSR if it can't deduce it dynamically.
The vendor detecting generic chips can't write anyway.
Corresponding to flashrom svn r1527.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Chip features an optional permanent boot block write protection.
Corresponding to flashrom svn r1522.
Signed-off-by: David Borg <borg.db@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This chip needs special command sequences in 8 bit mode. Also, 8 bit
programming needs actually 16bit double byte program.
The chip is found on the Bifferos Bifferboard, for example.
Corresponding to flashrom svn r1521.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.
This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.
Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)
Tested-by: David Hendricks <dhendrix@google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
Thanks also to Michael Karcher for his comments and preliminary review!
Corresponding to flashrom svn r1500.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Some flash chips contain OTP memory that we cannot read or write (yet). This
prohibits us from cloning them, hence warn the user if we detect it. Not all
variations of the tagged chips contain OTP memory. They are often only
enabled on request or have there own ordering numbers. There is usually no
way to distinguish them. Because this is a supposedly seldomly used feature
the warning is shown in with dbg verbosity.
The manpage is extended to describe the backgrounds a bit.
Corresponding to flashrom svn r1493.
This patch is based on the idea and code of Daniel Lenski.
Signed-off-by: Daniel Lenski <dlenski@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Write and erase are NOT yet supported!
Probe and read are tested by Andrew Morgan and Uwe Hermann on Intel NICs.
Corresponding to flashrom svn r1439.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The chip code is untested, only one erase function out of two is currently
implemented, and unlocking/printlocking is not yet supported.
Thanks Mattias Mattsson <vitplister@gmail.com> for the initial patch!
Corresponding to flashrom svn r1434.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Based on the definition of SST25LF040A and the public datasheet
available here: http://www.sst.com/dotAsset/40316.pdf
Also, move the SST25LF040A up to keep the list ordered
alphabetically (while removing the ".RES" suffix).
Corresponding to flashrom svn r1415.
Signed-off-by: Zeus Castro <thezeusjuice@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Enable AAI for:
SST25VF016B
SST25VF040B{,.REMS}
SST25VF080B
Chips that support AAI via a different opcode are annotated with a comment:
SST25VF040.REMS
SST25LF040A.RES
SST25VF080B
Tested-by: Joshua Roys <roysjosh@gmail.com>
Write time (w/erase) went from 46 s to 21 s.
SST25VF016B
Tested-by: Noé Rubinstein <nrubinstein@avencall.com>
Write time (w/erase) on a dediprog went from 143 mins to 56 mins.
Corresponding to flashrom svn r1402.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Rebased and
Acked-by: Noé Rubinstein <nrubinstein@avencall.com>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
According to the datasheets probe_w29ee011 is the only valid probe
function for those chips, but we have reports where those chips
were only detected with probe_jedec, and thus we assume that our
datasheets only cover an earlier stepping.
Corresponding to flashrom svn r1391.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also fix a few others and remove the one for Intel 28F002BC/BL/BV/BX-T
because we need to investigate it further.
Corresponding to flashrom svn r1375.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1323.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Peter Stuge <peter@stuge.se>
