Corresponding to flashrom svn r1853.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Begin to move functions that clearly belong to the (command line)
user interface out of flashrom's core files like flashrom.c.
- Refine messages within check_chip_supported(), rename it to
print_chip_support_status() and move it to newly created cli_common.c.
- Move flashbuses_to_text() to cli_common.c as well.
- Move global verbosity variables to cli_output.c.
Corresponding to flashrom svn r1841.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
ASUS Vintage 2 PH1 barebone systems have a mainboard from the P5LD2 series,
namely the P5LD2-MQ (although it is labeled V2-PH1). Pin 16 GPIO needs to
be raised to enable write/erase like on other boards of the series.
NB: it uses a ICH7DH southbridge and hence requires different PCI IDs.
Corresponding to flashrom svn r1828.
Signed-off-by: Dima Veselov <kab00m@lich.phys.spbu.ru>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Mark all ME-enabled Intel chipsets as DEP, alter print.c accordingly
(print_wiki.c was already prepared). And realign the chipset enable
table when we are at it already.
Corresponding to flashrom svn r1815.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add headers and columns (i.e. print device entries in a table-like manner).
Also, add and use test_state_to_text() to support the new test states.
Corresponding to flashrom svn r1807.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The new enum test_state looks like this:
enum test_state {
OK = 0,
NT = 1, /* Not tested */
BAD, /* Known to not work */
DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */
NA, /* Not applicable (e.g. write support on ROM chips) */
};
The second new state 'NA' is introduced, among other things, to indicate
the erase and write states of real ROMs correctly. This is also implemented
by this patch and required to exchange the previous bit mask in struct
flashchip with a new struct containing an enum test_state for each operation.
The -L output is changed accordingly to print '-' in the case of an N/A state
and the wiki output uses a new template producing a greyed out cell.
Previous users of enum test_state are not affected by this change (yet).
Corresponding to flashrom svn r1798.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs
(found in Kabini and Temash).
Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board.
Corresponding to flashrom svn r1794.
Signed-off-by: Wei Hu <wei@aristanetworks.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1770.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on real hardware by TeslaBIOS.
Besides the usual board_enable stuff the GPIO definitions for the ICH7 DH
were also missing. Apparently Intel forgot to add the PCI IDs for the desktop
version in the spec update, but the normal datasheet mentions the DH
desktop version so this should be fine...
Corresponding to flashrom svn r1764.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Because the board does not have any PCI subsystem IDs set and the
DMI strings are not very specific at all, autodetection has been disabled.
The GPIO was found by roxfan and the patch tested on hardware by Gelip,
thanks!
Corresponding to flashrom svn r1762.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Use the reentrant tokenizer version strtok_r to break up vendor and model
names in print.c.
- Add implementation of strtok_r for mingw (strtok_r is POSIX only).
- Free allocated temporary memory again.
Corresponding to flashrom svn r1700.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
REed by roxfan and Michael Karcher, patch by Stefan Tauner.
Corresponding to flashrom svn r1653.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Once upon a time usbdev_status was created for the ft2232
programmer. Its IDs are semantically different to pcidev_status
because they indicate USB instead of PCI IDs, but apart from that
both data structures are equal. This change makes life easier for
everything involved in handling and printing the status of devices
that is noted in those structures by combining them into dev_entry.
It is still possible to distinguish between PCI and USB devices
indirectly by using the struct programmer's type field.
Also, add a programmer column to the PCI and USB devices lists.
Corresponding to flashrom svn r1632.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
To be able to get rid of lots of #ifdefs and centralize programmer-specific
data more...
- introduce two new fields to struct programmer_entry, namely
enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status
or char *note).
- use those fields to generate device listings in print.c and print_wiki.c.
Bonus: add printing of USB devices to print_wiki.c and count supported PCI
and USB devices.
Corresponding to flashrom svn r1631.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
More clear "variable" names, better explanation if no programmer is selected etc.
Corresponding to flashrom svn r1624.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
IDs are from the host bridge and LPC controller. The enable function
was reverse engineered by roxfan, thanks!
User mezzo vanished without reporting any test results.
Corresponding to flashrom svn r1622.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Propagate the error code using return values instead, but let cli_classic.c
still decide the ultimate return value of the process.
Also, remove setting the ret value again after print_supported_wiki() -
success is the default.
Corresponding to flashrom svn r1614.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested Mainboards:
OK:
- Foxconn P55MX
http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html
Tested flash chips:
- Eon EN25F64 to PR (+PR)
http://paste.flashrom.org/view.php?id=1426
- Macronix MX25L1005 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html
- Set SST39VF512 to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html
Tested chipsets:
- Z77 (only reading was really tested)
Miscellaneous:
- Fix ft2232_spi's parameter parsing.
- Fix nicrealtek's init (always segfaulted since r1586 oops).
- Add another T60 variant to the laptop whitelist.
- Improve message shown when image file size does not match flash chip
- Refine messages regarding the flash descriptor override strap according
to the findings by Vladislav Bykov on his P55MX.
- Fix the ID of EN25F64.
- Demote and clarify debug message in serprog_delay().
- Minor other cleanups.
Corresponding to flashrom svn r1613.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It's the same as for the Neo2.
Thanks to roxfan and twice11 who did the RE!
Corresponding to flashrom svn r1597.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jud Porter
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Based on http://patchwork.coreboot.org/patch/2881/ but with
the right pin (i.e. 16) according to Joshua Roys.
Corresponding to flashrom svn r1596.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We made a first step into this direction in r1405, but failed to
notice that there was already an extended patch by Jonathan which
was refined to become this one.
Allows the removal of board_shuttle_fn25 (which was also intended to be
used on the ASUS A8N-SLI Deluxe, but this was never tested).
Corresponding to flashrom svn r1593.
A previous iteration was tested on CK804 and
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
which was then
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Rebasing, refining and making errors non-fatal is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
http://www.ajawe.pl/ajawe0208.htmhttp://www.ajawe.pl/files/0208_R_DOK.pdf
Corresponding to flashrom svn r1590.
First version was
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Refinements and general cleanup is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Corresponding to flashrom svn r1585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1581.
Based on http://patchwork.coreboot.org/patch/2983/
Signed-off-by: Tadas Slotkus <devtadas@gmail.com>
PCI IDs are generic therefore requiring manual activation.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but
that would not be a good choice for ID. So autodetection has been disabled
and the user needs to specify -p internal:mainboard=biostar:m7viq instead.
Corresponding to flashrom svn r1566.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.
Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
These are used in ASUS RS120-E5/PA2 servers.
GPIO pin discovered, patch prepared and
Tested-by: Geoffrey McRae
Corresponding to flashrom svn r1526.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on Bifferboard.
Corresponding to flashrom svn r1489.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously only the generic "unknown XXXX SPI chips" were ignored (because their
name started with "unknown".
This patch adds also all chips whose vendor starts with "Unknown" (none so far)
and "Programmer" (currently used by the opaque flash chip framework) .
A patch will add the SFDP chip template with an "Unknown" vendor field later.
Rationale: these entries do not contain any useful information when shown in -L
or wiki output. It would be better to add them to a general feature section or similar.
Corresponding to flashrom svn r1488.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds a generic phase 2 board enable that does nothing but set
is_laptop to 0 to circumvent an erroneous laptop detection due to ambigous
DMI chassis information.
Corresponding to flashrom svn r1487.
Signed-off-by: Ingo Feldschmid <ifel@msc-ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Typical AWARD enable structure with an ICH GPIO board enable.
This board seems also to be known as D2544-B1.
Success report:
http://www.flashrom.org/pipermail/flashrom/2012-January/008590.html
Corresponding to flashrom svn r1486.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Oliver Rath <rath@mglug.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move Asus A8Jm, Asus M6Ne to the laptop section.
No working URL for the A8Jm found.
Corresponding to flashrom svn r1472.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
