Only difference to its sibling W25Q128.V seems to be the supply voltage.
Change-Id: I34ce7f1bdd0d2fb1b065031e5a689bb16ffc70db
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested mainboards:
OK:
- ASRock Fatal1ty 970 Performance and P4i65G
Reported by anonymous email message ID:
932677687262b1300eaf14260999d9262c31@guerrillamail.com
The latter actually had a tested board enable already.
Flash chips:
- Eon EN25Q128 to PREW (+PREW)
Reported by Adrian Graham
- GigaDevice GD25VQ41B to PREW (+PREW)
Reported by David Hendricks
- Winbond W39V040FB to PREW (+EW)
Reported by fjed on IRC
Miscellaneous:
- Change PCI IDs of "MS-6577 (Xenon)" board enable.
The previous IDs contained the on-board display adapter which is
disabled when a dedicated graphics card is installed.
- Add a note to the README how to overcome the clang warning if only a
single programmer is enabled.
- Fix some typo and manpage problems found by lintian
- r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
This patch corrects that.
- Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
Previous PCI IDs were board-specific but ot the other of devices
that could be disabled by the firmware or that vary among
hardware revions. There are no good alternatives available.
However, since we always have a DMI decoder available now, we can
use non-board-specific devices without taking risks. Thanks to
Uwe Hermann for reporting and testing.
- Some other small changes to clean up whitespace and fix some warnings
from Debian's lintian.
Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The earlier versions of the chip require 0x2AAA for probes thus split the
definitions and set them to untested to provoke reports.
Corresponding to flashrom svn r1922.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- ASRock G31M-GS
Reported by Александр Трубицын
- ASRock G41M-VS3
Reported by Александр Трубицын
- ASRock N68C-S UCC
Reported by Alexey Belyaev
- ASRock AMCP7AION-HT (ION 330HT(-BD))
Reported by Stefan Tauner
- ASUS P5K SE
Reported by Александр Трубицын
- ASUS P5KPL-VM
Reported by Marin Vlah
- ASUS RAMPAGE III GENE
Reported by stevessss on IRC
- GIGABYTE GA-945GM-S2
Reported by Александр Трубицын
- GIGABYTE GA-945GCM-S2 (rev. 3.0)
Reported by Александр Трубицын
- GIGABYTE GA-965P-S3
Reported by Александр Трубицын
- GIGABYTE GA-EG43M-S2H
Reported by Александр Трубицын
- GIGABYTE GA-EP31-DS3L (rev. 1.0)
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2L
Reported by Александр Трубицын
- GIGABYTE GA-H55M-S2
Reported by Александр Трубицын
- GIGABYTE GA-J1900N-D3V
Reported by Marcos Truchado and Guillermo von Hünefeld
- GIGABYTE GA-K8NS
Reported by nicolae788
- GIGABYTE GA-M56S-S3
Reported by Estevo Paz Freire
- GIGABYTE GA-P31-DS3L
Reported by Александр Трубицын
- GIGABYTE GA-P31-S3G
Reported by Александр Трубицын
- MSI MS-7336
Reported by Benjamin Bellec
- MSI X79A-GD45 (8D) (MS-7760)"
Reported by mortehu on IRC
- Supermicro A1SAi-2550F
Reported by Bernard Grymonpon
- Supermicro X7DWT
Reported by Steven Stremciuc
Laptop:
- ASUS U38N
Reported by Ultra on IRC
- Dell Latitude D630
Reported by Márton Miklós
- Fujitsu Amilo Xi 3650
Reported by Elmar Stellnberger
- Lenovo T400 (whitelisting only)
Chipsets:
- Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
Reported by Jeremy Porter and Bernard Grymonpon
- Add Intel Sunrise Point IDs but no support yet.
Flash chips:
- Atmel AT45DB321D to PREW (+PREW)
Reported by The Raven
- Eon EN25QH32 to PREW (+PREW)
Reported by Josua Mayer
- Eon EN25QH64 to PREW (+EW)
Reported by David s. Alessio
- GigaDevice GD25LQ64(B) to PREW (+PREW)
Reported by Greg Tippit
- Intel 28F001BN/BX-T to PREW (+EW)
Reported by Lu Xie
- Micron M25P10-A to PREW (+W)
Reported by the Raven
- Micron M25PE40
Reported by David Wood
- Micron N25Q128..3E to PREW (+PREW)
Reported by Miklós Márton
- Macronix MX25L3273E to PREW (+PREW)
Reported by Roklobsta on IRC
- Macronix MX23L6454 to PR (+PR)
Reported by Steven Honeyman
- Macronix MX25U6435E/F to PREW (+PREW)
Reported by Marcos Truchado and Guillermo von Hünefeld
- PMC Pm25LQ032C to PREW (+EW)
Reported by Dirk Knop
- Spansion S25FL016A to PREW (+EW)
Reported by Márton Miklós
- Spansion S25FL128S......0 to PREW (+PREW)
Reported by Jim Houston
- Spansion S25FL204K to PR (+PR)
Reported by Thomas Debrunner
- SST SST49LF016C to PREW (+EW)
Reported by Steven Stremciuc
- SST SST39VF040 to PREW (+PREW)
Reported by Xavier Bourgeois
- SST SST49LF040B to PREW (+EW)
Reported by Rikard Åhlund
- ST M25P10-A to PREW (+W)
Reported by Martijn Schiedon
- Winbond W39V040FA to PREW (+EW)
Reported by Евгений Черкашин
- Winbond W39V080FA to PREW (+EW)
Reported by protagonist0 on IRC
- Winbond W25Q80.W to PREW (+PREW)
Reported by Miklós Márton
- Winbond W25X64 to PREW (+REW)
Reported by Johannes Krampf and Manuel Dejonghe
- Fix ID of AMIC A25LQ64
Reported by Roman Titov
- Fix page size of Spansion S25FL129P......1
Copy and paste error from the 128S uniform 256kB variant, probably.
- Add Micron/Numonyx phase-change memory IDs
Miscellaneous:
- Detect Android target OS.
No changes are required to build flashrom (excluding programmers
with NEED_PCI) on Android.
- Update rayerspi (spipgm) URL
- Fix max_data_write handling of at45db.
- Minor refinement of the README
- Mark board enable for the GA-K8NS variants as tested.
Tested by "nicolae788" on a board with socket 754.
- Mark "Multi-system" chassis as non-laptop case.
- Remove W836xx log requests.
We got enough (and no one is looking at them for the time being anyway).
- serprog: improve invalid reply error message, contributed by Urja Rannikko.
- Remove default include paths for MinGW.
- Disable implicit rules in the Makefile because we don't need them and they
just make the build (imperceptibly) slower.
- Enable our own strnlen() implementation not only on DJGPP but also if
HAVE_STRNLEN is not defined. This is needed to get older BSDs
(e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
- Tiny other stuff.
Corresponding to flashrom svn r1917.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1903.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jose Luis León <zenky1@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Apart from the strange ID (using Sanyo's vendor ID 0x62) the main
difference from the plain SST25WF series is that they lack op codes
0xAD (AAI Word program) and 0x52 (32K erase). The smallest version
does not support dual I/O operations either.
SST25WF080B was tested under Linux with spidev.
Corresponding to flashrom svn r1901.
Tested-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested with a W29EE512P-70 (PLCC32, 5V) found on an RTL8169 network card.
The ID for the chip was already in flashchips.h with the name W29C512A
and a note for "also W29EE512". The datasheets are almost identical.
Corresponding to flashrom svn r1892.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1891.
Signed-off-by: Steven Honeyman <stevenhoneyman@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- Elitegroup GF7050VT-M
Reported by Alex
- Fujitsu D2724-A1x (used in ESPRIMO E5625)
Reported by Rainer Spillmann
- Teclast X98 Air 3G
Reported by Antonio Ospite
Flash chips:
- Fix MX25L6405(D) definition by splitting it.
Reported by Reggie McMurtrey
- Add Macronix MX25L..08E family and rearrange MX25L6436E.
- Pm49FL004 to PREW (+EW)
Reported by Georg Sauthoff
Miscellaneous:
- Add board enable for abit KN9 Ultra.
- Mark ARM-USB-OCD as working OK.
- Use "mobile devices" instead of "laptops" in output.
- Tiny other stuff.
Corresponding to flashrom svn r1886.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- AOpen UK79G-1394 (used in EZ18 barebones)
Reported by Lawrence Gough
- ASUS M4N78 SE
Reported by Dima Veselov
- ASUS P5LD2-VM
Mark board enable as tested (reported by Dima Veselov)
- GIGABYTE GA-970A-UD3P (rev. 2.0)
Reported by trucmar on IRC
- GIGABYTE GA-990FXA-UD3 (rev. 4.0)
Reported by ROKO__ on IRC
- GIGABYTE GA-H77-DS3H (rev. 1.1)
Reported by Evgeniy Edigarev
- GIGABYTE GA-P55-USB3 (rev. 2.0)
Reported by Måns Thörnqvist
- MSI MS-7817 (H81M-E33)
Reported by Igor Kolker
Chipsets:
- Marked Intel Bay Trail (0x0f1c) as tested OK
Reported by Antonio Ospite
- Refine Intel IDs
* Add IDs for Braswell
* Add IDs for 9 Series PCHs (e.g. H97, Z97)
* Rename Wellsburg devices slightly
Flash chips:
- Atmel AT25DF041A to PREW (+PREW)
Reported by Tai-hwa Liang
- Atmel AT26DF161 to PREW (+EW)
Reported by Steve Shenton
- Atmel AT45DB011D to PREW (+PREW)
Reported by The Raven
- Atmel AT45DB642D to PREW (+PREW)
Reported by Mahesh Mokal
- Eon EN25F32 to PREW (+PREW)
Reported by Arman Khodabande
- Eon EN25F40 to PREW (+REW)
Reported by Jerrad Pierce
- Eon EN25QH16 to PREW (+EW)
Reported by Ben Johnson
- GigaDevice GD25Q20(B) to PREW (+PREW)
Reported by Gilles Aurejac
- Macronix MX25U6435E/F to PR (+PR)
Reported by Matt Taggart
- PMC Pm25LV512(A) to PREW (+PREW)
Reported by The Raven
- SST SST39VF020 to PREW (+PREW)
Reported by Urja Rannikko
- Winbond W25Q40.V to PREW (+EW)
Reported by Torben Nielsen
- Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E).
- Add MX25L6465E variant.
- There was never a MX25L12805 AFAICT.
- Split MX25L12805 from models with the same ID but an additional 32 kB
eraser: MX25L12835F/MX25L12845E/MX25L12865E.
- Add a bunch of ST parallel NOR flash chip IDs.
Miscellaneous:
- Whitelist ThinkPad X200.
- Constify master parameter of register_master().
- Remove FEATURE_BYTEWRITES because it was never used at all.
- Refine hwseq messages and make them less prominent.
- Fix the yet unused PRIxCHIPADDR format string thingy.
- Fix copy&paste error in spi_prettyprint_status_register_bp().
Spotted by Pablo Cases.
- Add an additional SMBus controller revision to identify another Yangtze
model. Thanks to Dan Christensen for reporting this issue.
- dediprog: add missing include for stdlib.h.
This fixes (at least) building on FreeBSD and DragonflyBSD with gcc.
- Remove references to struct pci_filter from programmer.h.
It is only needed in internal.c where it has a complete type. Having
it in programmer.h provokes a warning by some old versions of gcc.
- Tiny other stuff.
Corresponding to flashrom svn r1879.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
These are very similar to Eon's EN25B series but unlike those the
EN25P has uniform sectors (of 32 and 64 kB). They can not be
distinguished by RDID alone but the RES and REMS IDs are different
and hence could be detected eventually in the future. This patch
also refines tiny bits of the EN25B series.
The series includes:
- EN25P05
- EN25P10
- EN25P20
- EN25P40
- EN25P80
- EN25P16
- EN25P32
- EN25P64
Corresponding to flashrom svn r1870.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1868.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is based on the code sent to the flashrom mailing list
by Alex Lu (alexlu6@mxic.com.tw) without sign-off.
Corresponding to flashrom svn r1867.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This flash chip can be configured (one time) to use 64 KiB or 256 KiB sectors.
Additionally, in the 64 KiB mode it supports 16 4 KiB sub-sectors that can be
(one time) programmed to be on the top or bottom of the device. The sub-sectors
can be erased with the 0x20 opcode but because this opcode does not work
with the remaining sectors and flashrom can not cope with that the 0x20
opcode is not supported yet.
This patch adds two definitions, one for the 64 KiB and 256 KiB configuration
respectively. The device also shares the RDID with the various S25FL128
devices so we have to increase the maximum number of successfully probed
chips to 8.
The 64 KiB mode was tested on real hardware.
Corresponding to flashrom svn r1858.
Signed-off-by: Jernej Škrabec <jernej.skrabec@planet.si>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Both use the same ID and are mostly identical.
Corresponding to flashrom svn r1857.
Tested-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Read-tested by Peter Ruesch.
Corresponding to flashrom svn r1850.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1846.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Some Parallel bus chips have a 16-bit mode and an 8-bit mode. They use
normal JEDEC addresses for 16-bit mode and shifted addresses (by 1 bit)
for 8-bit mode. Some programmers can access them in 16-bit mode, but on
all flashrom-supported programmers so far, we access them in 8-bit mode.
This means we have to shift the addresses but apart from the addresses
we can share the code.
This patch makes this possible by checking the chip's FEATURE_ADDR_SHIFTED
flag in common JEDEC functions and applying the right addresses respectively.
Corresponding to flashrom svn r1840.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Additionally to the existing S25FL128S......0 definition this patch
adds S25FL128P......0, S25FL128P......1 and S25FL128S......1, as well as
S25FL129P......0 and S25FL129P......1 definitions.
S25FL12xP seem to be the predecessor families of S25FL128S. All
associated chips can not be distinguished with RDID alone.
Besides the new chips, this patch also fixes the name of the previously
supported S25FL128S model with uniform 256 kB sectors
(S25FL128P......1 not 0) and adds the hybrid sector version (0) as well.
Due to the shared IDs the user has to select the right chip manually
with the -c parameter. To make this even possible, this patch enlarges
the respective array for results to 6.
Tested-by: Antonio Ospite <ao2@ao2.it>
with a S25FL129P......0.
Corresponding to flashrom svn r1838.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
29GL chips use a new 3-Byte device ID probing function at addresses
0x01, 0x0E, 0x0F.
Flash chip families supported by this method include...
- EON EN29GL
- Gigadevice GD29GL (if they really exist)
- ISSI (PMC) IS29GL
- Macronix MX29GL (+MX68GL1G0F)
- Spansion S29GL (+S70GL02G)
- Winbond W29GL
This patch adds respective flash chip definitions for chips up to 16 MB from
Eon, ISSI, Macronix and Winbond. Bigger chips as well as those from
Gigadevice and Spansion are left out.
Corresponding to flashrom svn r1835.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, slightly refine the definition of AT49LH002.
Corresponding to flashrom svn r1834.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families.
The erase and write test status bits of all affected chips have been reset.
Corresponding to flashrom svn r1833.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The MX29F022(N)T definition was successfully tested by Daniele.
Corresponding to flashrom svn r1825.
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1823.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, add spi_disable_blockprotect_bp1_srwd().
Originally written and tested by The Raven <originalraven@hotmail.com>.
Corresponding to flashrom svn r1818.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1810.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch combines two identical block and chip erase functions respectively:
- Merge block_erase_m29f400bt and block_erase_en29lv640b into
erase_block_shifted_jedec.
- Merge block_erase_chip_m29f400bt and block_erase_chip_en29lv640b into
erase_chip_block_shifted_jedec.
Leave their implementations in en29lv640b.c for now.
Corresponding to flashrom svn r1808.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Apparently PMC did not understand the purpose of the JEDEC
continuation code. These chips reply to RES (the only supported ID
command) with the prefix-less vendor ID, a device ID, eventually
followed by the continuation byte for the vendor ID.
This fix uses only the first two bytes instead of appending the
continuation code to the device ID. The problem was reported by The
Raven who also tested the fix on a Pm25LV010 (with an imprint of
"Pm25LV010E").
Corresponding to flashrom svn r1806.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Spi_prettyprint_status_register_default_bpX ->
spi_prettyprint_status_register_bpX_srwd
Why was the default in there anyway? :)
Corresponding to flashrom svn r1802.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1801.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Stefan Reinauer has reported ridiculous NULL checks for arrays in our
self_check function found by Coverity (CID1130005). This patch removes
the useless checks but keeps and fixes the one responsible for the
flashchips array by exporting the array size in a new constant.
Corresponding to flashrom svn r1799.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The new enum test_state looks like this:
enum test_state {
OK = 0,
NT = 1, /* Not tested */
BAD, /* Known to not work */
DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */
NA, /* Not applicable (e.g. write support on ROM chips) */
};
The second new state 'NA' is introduced, among other things, to indicate
the erase and write states of real ROMs correctly. This is also implemented
by this patch and required to exchange the previous bit mask in struct
flashchip with a new struct containing an enum test_state for each operation.
The -L output is changed accordingly to print '-' in the case of an N/A state
and the wiki output uses a new template producing a greyed out cell.
Previous users of enum test_state are not affected by this change (yet).
Corresponding to flashrom svn r1798.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No datasheet available. Tested read, write and all erasers separately by
The Raven. He did also provide the patch but refused to sign it off.
Corresponding to flashrom svn r1796.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is very similar to LE25FW418A, except for HD_READ support (that
is not implemented in flashrom anyway yet) and allowed voltage range.
Probing, erasing, reading and writing has been tested.
This chip is found on Seagate Constellation hard drives.
Corresponding to flashrom svn r1791.
Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on hardware by Idwer too.
Corresponding to flashrom svn r1787.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested with actual S25FL164K via Arduino SPI.
Corresponding to flashrom svn r1786.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of the whole family.
Corresponding to flashrom svn r1785.
Signed-off-by: Jason Harper <jharper@iseis.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1784.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- abit BX6 2.0
Reported by Stefan Tauner
- Acer EM61SM/EM61PM (used in Acer Aspire T180)
Reported by Benjamin Bellec
- ADLINK Express-HR
Reported by Obermair Thomas
- ASUS M3N-H/HDMI
Reported by Franc Serres
- Attro G5G100-P
Reported by Christoph Grenz
- ASRock 960GM-GS3 FX
Reported by Fuley Istvan
- Elitegroup P6BAP-A+ (V2.2)
Reported by Arnaldo Pirrone
- Elitegroup GeForce7050M-M (V2.0)
Reported by Leif Middelschulte
- Fujitsu D3041-A1 (used in ESPRIMO P2560)
Reported by Daggi Duck
- GIGABYTE GA-8S648
Reported by TeslaBIOS
- GIGABYTE GA-970A-D3P (rev. 1.0)
Reported by Jean-Francois Pirus
- GIGABYTE GA-B85M-D3H
Reported by Mladen Milinković
- GIGABYTE GA-X79-UD3
Reported by Jeff O'Neil
- GIGABYTE GA-X79-UP4 (rev. 1.0)
Reported by George Spelvin
- GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3)
Reported by Vangelis Skarmoutsos
- GIGABYTE GA-Z87-HD3
Reported by virii5
- Lenovo Tilapia CRB
Reported by jenkins56 on IRC
- MSI GT60-2OD (notebook, only with layout patches)
Reported by Vasiliy Vylegzhanin
- MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid)
Reported by professorll
- MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640)
Reported by Koen Rousseau
- MSI MS-7125 (K8N Neo4(-F/FI/FX))
We had a board enable for that one for years, but it was not (and still is not)
completely clear which boards are covered.
- MSI MS-7522 (MSI X58 Pro-E)
Reported by Gianluigi Tiesi
- PCWARE APM80-D3
Reported by César Augusto Jakoby
- Pegatron IPP7A-CP
Reported by Илья Шипко
- Supermicro H8QME-2
Reported by Greg Tippitt
- Supermicro X7SPA-H
Reported by Kyle Bentley
- Supermicro X7SPE-HF-D525
Reported by Micah Anderson
- Supermicro X8DTE
Reported by Mark Nipper
- Supermicro X8SIL-F
Reported by Peter Samuelson
- ZOTAC IONITX-A (-E) version
Reported by Maciej Wroniecki
NOT OK:
- Supermicro X10SLM-F
Reported by Micah Anderson
Flash chips:
- Atmel AT29C020 to PREW (+PREW)
It was marked like that in the past, but I could not find the reason why the
test bits were reset. Urja Rannikko tested it again and it still works.
- Eon EN25F10 to PREW (+PREW)
Reported by Stolmár Tamás
- Eon EN25QH64 to PR (+PR)
Reported by Vladimir 'φ-coder' Serbinenko
- GigaDevice GD25Q32(B) to PREW (+PREW)
Reported by mrnuke
- Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW)
Reported by Jamie Nichol
- Macronix MX25L2005(C) to PREW (+PREW)
Reported by Давыдов Дмитрий
- Micron/Numonyx/ST N25Q064..1E to PREW (+PREW)
Reported by Paolo Zambotti
- Pmc Pm25LD010(C) to PREW (+PREW)
Reported by Vasile Ceteras
- Micron/Numonyx/ST M25P16 to PREW (+EW)
Reported by raven
- Micron/Numonyx/ST M25PX64 to PREW (+W)
Reported by Zaolin
- SST SST25VF020B to PREW (+PREW)
Reported by Michaël Zweers
- SST SST49LF040 to PREW (+W)
Reported by Oskar Enoksson
- Add support for MX25L3273E (evil twin of MX25L3205 et al.)
Also, add MX25L1673 and MX25L6473E to the names of their twins and
add a note about MX25L8073E.
- Winbond W25X32 to PREW (+REW)
Reported by The Raven
- Winbond W29C010 etc. to PREW (+W)
Reported by san
Chipsets tested OK:
- Intel NM70 (8086:1e5f)
Reported by mrnuke
- Intel C204 (8086:1c54)
Reported by Vasiliy Vylegzhanin
- Intel QM67 (8086:1c4f)
Reported by Obermair Thomas
- Intel HM77 (8086:1e57)
Reported by Vasiliy Vylegzhanin
- Intel B85 (8086:8c50)
Reported by Mladen Milinković
- Intel HM87 (8086:8c4b)
Reported by Vasiliy Vylegzhanin
- Intel Z87 (8086:8c44)
Reported by virii5
- NVIDIA MCP51 (10de:0261)
Reported by Marcin Kościelnicki
- SiS 648 (1039:0648)
Reported by TeslaBIOS
Miscellaneous:
- Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_).
- getrevision.sh: Ignore failing date calls.
- getrevision.sh: Fix -u and -l for older git versions which require = for the
git log grep parameter.
- Corrected K8T Neo2-F entries due to a report from Stelios Tsampas.
- Add "-p internal" to output that requests users to send flashrom -V logs.
- Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist.
- Tiny other stuff.
Corresponding to flashrom svn r1783.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Reorder some models and refine comments.
- Add SST25VF512A:
AAI is available but with an uncommon opcode (0xAF). Fully tested
with Bus Pirate 3.5 running 6.2 beta firmware by Cory.
- Add SST25VF020 and SST25VF020B.
Corresponding to flashrom svn r1758.
Signed-off-by: Cory Henderson <dcoryh192@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1737.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There are two locking strategies used by this umbrella family, one uniform
and one that matches the sector layout of the chip. Refactor the functions
involved and rename the overly complicated file to just stm50.c and the
functions accordingly.
This fixes unlocking of some of the non-uniform chips and gets rid of the
abuse of page_size.
Corresponding to flashrom svn r1736.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch replaces Alex Mauer's previous patch for this board (from 2008).
Tested to read, erase, and write on 2 different boards, both with AMIC
A29040BL flash chips, using both stock BIOS and coreboot images.
This patch marks the AMIC chip as tested at the same time.
Corresponding to flashrom svn r1733.
Signed-off-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This one is even more strange than the AT45DB chips. Like the AT45DB321C
it does not support any power-of-2 page sizes. There is only one asymmetrical
eraser and that uses two opcodes.
Corresponding to flashrom svn r1725.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
