All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but
that would not be a good choice for ID. So autodetection has been disabled
and the user needs to specify -p internal:mainboard=biostar:m7viq instead.
Corresponding to flashrom svn r1566.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.
Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
These are used in ASUS RS120-E5/PA2 servers.
GPIO pin discovered, patch prepared and
Tested-by: Geoffrey McRae
Corresponding to flashrom svn r1526.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested on Bifferboard.
Corresponding to flashrom svn r1489.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously only the generic "unknown XXXX SPI chips" were ignored (because their
name started with "unknown".
This patch adds also all chips whose vendor starts with "Unknown" (none so far)
and "Programmer" (currently used by the opaque flash chip framework) .
A patch will add the SFDP chip template with an "Unknown" vendor field later.
Rationale: these entries do not contain any useful information when shown in -L
or wiki output. It would be better to add them to a general feature section or similar.
Corresponding to flashrom svn r1488.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch adds a generic phase 2 board enable that does nothing but set
is_laptop to 0 to circumvent an erroneous laptop detection due to ambigous
DMI chassis information.
Corresponding to flashrom svn r1487.
Signed-off-by: Ingo Feldschmid <ifel@msc-ge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Typical AWARD enable structure with an ICH GPIO board enable.
This board seems also to be known as D2544-B1.
Success report:
http://www.flashrom.org/pipermail/flashrom/2012-January/008590.html
Corresponding to flashrom svn r1486.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Oliver Rath <rath@mglug.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
NOTE:
The --list-supported-wiki output changed to use -p internal:mainboard=
instead of -m
The --list-supported output changed the heading of the mainboard list
from
Vendor Board Status Required option
to
Vendor Board Status Required value for
-p internal:mainboard=
Fix lb_vendor_dev_from_string() not to write to the supplied string.
Corresponding to flashrom svn r1483.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move Asus A8Jm, Asus M6Ne to the laptop section.
No working URL for the A8Jm found.
Corresponding to flashrom svn r1472.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Paul with some polishing by Stefan.
Success log:
http://www.flashrom.org/pipermail/flashrom/2011-November/008257.html
Corresponding to flashrom svn r1468.
Signed-off-by: Joshua Roys <roysjosh at gmail.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The reverse engineering was done by Joshua. The actual patch was
fabricated by Stefan.
Request:
http://www.flashrom.org/pipermail/flashrom/2011-November/008241.html
Success report:
http://paste.flashrom.org/view.php?id=914
Corresponding to flashrom svn r1467.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Mugendai <mugendai42@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This looks suspiciously like intel_ich_gpio_set.
Based on that, add board enables for the ASUS P5N-D and P5N-E SLI.
This was tested by Guillaume Poirier-Morency on a P5N-D:
http://www.flashrom.org/pipermail/flashrom/2011-August/007706.html
Corresponding to flashrom svn r1466.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Small changes were also contributed and
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
An opaque programmer does not allow direct flash access and only offers
abstract probe/read/erase/write methods.
Due to that, opaque programmers need their own infrastructure and
registration framework.
Corresponding to flashrom svn r1459.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Changes related to P5GD1 variants:
- Reorder "P5GD1 Pro" in print.c and include a DMI patter to its board enable
- Add an untested "P5GD1(-VM)" board enable and add an entry to print.c
- Add P5GD1-VM/S variant as reported by "Limer"
Changes related to P5GD(2/C) variants:
- Fix the name of "P5GDC-V Deluxe" board enable and add a DMI pattern and
print.c entry. NB: there is no "P5GDC-V" board.
- Add a generic match for P5GD(2/C)* boards with a not tested tag.
This are the potential targets for this according to the asus ftp:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/
Unsupported variants of the P5GD2:
P5GD2, P5GD2 Deluxe, P5GD2 Pro, P5GD2-X
(P5GD2 Premium is already tested)
(there seems to be also a P5GD2-TVM/GB/SI in the wild, which is not known to
asus :)
Unsupported variants of the P5GDC:
P5GDC Pro, P5GDC-MX
(P5GDC Deluxe and P5GDC-V Deluxe are already tested)
References:
P5GD1 PRO (dmi "P5GD1 PRO")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, *0x814e*
http://www.coreboot.org/pipermail/flashrom/2010-August/004539.html
P5GD1 (dmi "P5GD1")
The non-pro version seems to match the pro pci pattern, but could be
distinguished by the SATA ID of 1043:2604 vs. 1043:2601:
https://launchpadlibrarian.net/62167576/Lspci.txt
or a DMI pattern of course.
P5GD1-VM (dmi "P5GD1-VM")
This does also match the current PCI IDs.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/465379
- P5GD2 Premium (dmi "P5GD2-Premium")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-August/004555.html
- P5GDC-V Deluxe (dmi "P5GDC-V")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004939.html
- P5GDC Deluxe (dmi "P5GDC")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
http://www.flashrom.org/pipermail/flashrom/2010-September/004684.html
- P5GDC Pro, P5GDC-MX, P5GD2-X, P5GD2 Pro, P5GD2
no useful logs found
- P5GD2-Deluxe (dmi "P5GD2-Deluxe")
smbus: 0x8086, 0x266a, 0x1043, 0x80a6; audio: 0x8086, 0x2668, 0x1043, 0x813d
https://bugs.launchpad.net/ubuntu/+source/foomatic-filters/+bug/572514
- P5GD2-TVM/GB/SI (dmi "P5GD2-TVM/GB/SI")
smbus: 0x8086, 0x266a, 0x1043, 0x266a; audio: 0x8086, 0x2668, 0x1043, *0x81a7*
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/462500
Corresponding to flashrom svn r1457.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
and due to the tremendous interest... ;)
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
I disassembled the write enable and the write disable functions from
the Award BIOS image and reconstructed C code to understand for
myself what happens. For details see:
http://www.flashrom.org/pipermail/flashrom/2011-October/008033.html
I compared the download pages of both, abit AV8 and abit AV8-3rd Eye,
and the BIOS downloads are the same. So it's save to assume that this
board enable works on both versions. Tested on AV8.
Corresponding to flashrom svn r1455.
Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Besides adding output for the voltage ranges, this patch also changes
various aspects of the -L output:
- sizes are right aligned now with a fixed length of 5
- space between columns is selectable with a constant
- test results are always shown in the same column ("PR" and " R"
instead of "PR" and "R ")
- vendor and device names are split on a delimiter (currently '/') and
spread over mutliple lines but only if the tokens are not too short.
all other columns are printed on the first line of a chip.
- voltage ranges are printed in verbose mode only
it also gets rid of POS_PRINT and digits
Corresponding to flashrom svn r1438.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Based on the REing of Michael Karcher and a good guess of Idwer Vollering.
Corresponding to flashrom svn r1419.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Leon Zhang <leoncamel at gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-August/004500.html
Tested-by: medhi <nefkongo@hotmail.com>
http://paste.flashrom.org/view.php?id=779
Acked-by: Idwer Vollering <vidwer@gmail.com>
This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There are numerous other variants of the P5LD2 which vary wildly not only in
PCB layout but also in northbridges used, number of PCI, PCI-E and DIMM slots
etc. This one is for the plain P5LD2 without any suffixes.
This patch is essentially a rebased version of Joshua's patch, which was never
tested (user did not reply). I have added additional PCI IDs and the DMI pattern
and also changed the status to NT. An entry in the print.c table was also added.
http://www.flashrom.org/pipermail/flashrom/2010-October/005080.html
Corresponding to flashrom svn r1410.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It is based on Joshua Roys' RE.
http://www.flashrom.org/pipermail/flashrom/2011-August/007504.html
Corresponding to flashrom svn r1408.
Tested-by: Márton Miklós
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- retag it as OK (tested by Jonathan Kollasch when he wrote it)
http://patchwork.coreboot.org/patch/2106/
- add a line with identical pci ids but a different DMI pattern, so that EP-9NPA7I
is also matched. combining multiple boards in one line is problematic due to
print.c's detection of board enables - so dont bother for now.
http://www.flashrom.org/pipermail/flashrom/2011-June/006878.html
See previous commit for additional information.
Corresponding to flashrom svn r1406.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- add J-7BXAN to the list of supported boards
http://www.flashrom.org/pipermail/flashrom/2011-July/007397.html
- fix urls, typos, whitespace etc.
- fix counting of supported chips in the wiki output
Corresponding to flashrom svn r1393.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
the last one is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
everything else is
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
P5N-E SLI, EP-8NPA7I and EP-9NPA7I all need at least this patch:
http://patchwork.coreboot.org/patch/2125/
the P5N-E also needs a board enable:
http://patchwork.coreboot.org/patch/3298/
mark the boards as not working until those are merged.
Corresponding to flashrom svn r1382.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1369.
Signed-off-by: Benjamin Bellec <b.bellec@gmail.com>
with small changes:
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
http://patchwork.coreboot.org/patch/2893/
lspci: http://paste.flashrom.org/view.php?id=494
only writing a backup file was tested, so mark it as untested.
Corresponding to flashrom svn r1368.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
