Tested on a 82541PI (0x8086, 0x107c) using 32-bit hardware.
The last line in nicintel_request_spibus() could be changed so that FL_BUSY
is used instead.
Shortened sample log:
[...]
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
Multiple flash chips were detected: M25P05.RES M25P10.RES
Please specify which chip to use with the -c <chipname> option.
[...]
Corresponding to flashrom svn r1151.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Many thanks to Michael Karcher for reverse engineering this.
lspci/superio output:
http://www.flashrom.org/pipermail/flashrom/2010-August/004475.html
Corresponding to flashrom svn r1146.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
- There are number of boards that have board-enables in board-enable.c but
have no corresponding entry in print.c (with or without URL doesn't matter)
and thus appear neither in the "flashrom -L" list of boards nor in the
wiki output. Fix this by adding entries for them in print.c.
- abit AN-M2
- abit KN8 Ultra
- ASUS A8Jm (laptop)
- ASUS A8N (might need changing to "A8N-SLI Deluxe", see
http://www.coreboot.org/pipermail/flashrom/2009-November/000878.html)
- ASUS A8N-LA (Nagami-GL8E)
- ASUS P4B533-E
- ASUS P4S800-MX
- HP ProLiant DL165 G6
- IBASE MB899
- Intel SE440BX-2 (marked as non-working for now though, due to
http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html)
- MSI MS-6577 (Xenon)
- MSI MS-7207 (K8NGM2-L)
- Fix / amend a few board names:
- Add "ProLiant" name to the "DL145 G3" (and the new "DL165 G6"), we
use such "series" names for various other boards (e.g. "Vectra" etc)
and it also helps users googling for those names.
- HP "Vectra VL400 PC" should be "Vectra VL400" really, I'm pretty sure
the "PC" is not part of the board name but simply stands for
"personal computer". Same for "Vectra VL420 SFF PC".
- Change "ASUS A8JM" to "ASUS A8Jm" as per vendor website.
- Add comments for boards which may be listed with incorrect names,
I sent out clarification requests to the list, URLs listed as comment.
- Add "Xenon" HP name to the "MSI MS-6577" OEM board.
- Fix typo in "MS-7207 (K8N GM2-L)", should be "MS-7207 (K8NGM2-L)" as
per vendor website.
Corresponding to flashrom svn r1141.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004414.html
(URL added by Michael Karcher)
Corresponding to flashrom svn r1139.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
I had to use the USB controller in the board enable because all other
subsystem IDs are having vendor: Gigabyte but mostly copy the Intel
product IDs.
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-August/004420.html
Corresponding to flashrom svn r1138.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Thomas Kalka <thomas.kalka@googlemail.com>
- Fix incorrect whitespace, indentation, and coding style in some places.
- Drop '/**' Doxygen comments, we don't use Doxygen. Even if we would use
it, the comments are useless as we don't have any Doxygen markup in there.
- Use consistent vendor name spelling as per current website (NVIDIA,
abit, GIGABYTE).
- Use consistent / common format for "Suited for:" lines in board_enable.c.
- Add some missing 'void's in functions taking no arguments.
- Add missing fullstops in sentences, remove them from non-sentences (lists).
Corresponding to flashrom svn r1134.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This was successfully tested by 'kai2343' on IRC.
Thanks to Michael Karcher for finding the board enable.
Corresponding to flashrom svn r1133.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add support for the Amontec JTAGkey2, see
http://www.amontec.com/jtagkey2.shtmlhttp://www.amontec.com/jtagkey.shtml.
This FTDI 2232H variant has an additional output enable, which will be
set to its "on" (L) when CS is pulled low. But it lacks a power supply
and you need an external 3.3V source.
The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It
should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I
only have a JTAGkey2 here for testing.
Add all FT2232H/FT4232H based programmers to the list printed with
flashrom -L
Corresponding to flashrom svn r1119.
Signed-off-by: Jörg Fischer <turboj@gmx.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
To be safe, the onboard video of the nView edition of this board has
been included in the match. If other NF-M2 editions have the same board
enable, the match should be broadened
lspci/superiotool
http://www.coreboot.org/pipermail/flashrom/2010-April/002909.html
No success report, thus committed as untested.
Corresponding to flashrom svn r1109.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by idlogin / Putlinuxonit <putlinuxonit@gmail.com>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-May/003330.html
No success report, so committed as untested.
Corresponding to flashrom svn r1106.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Non-working board reported by: Anders Jenbo <anders@jenbo.dk>
lspci/superiotool:
http://www.coreboot.org/pipermail/flashrom/2010-June/003346.html
no success report, so committed as untested.
Corresponding to flashrom svn r1105.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
No response from reporter - committed as "untested".
Corresponding to flashrom svn r1101.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Change the nicnatsemi address mask to use MA0-MA16 and set the maximum
decode size to 128KB.
Corresponding to flashrom svn r1095.
Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Fix a bug where 4 GB of spaces would be printed per line if a vendor
name was longer than 10 chars.
This patch is needed to commit MoselVitelic chip support.
Corresponding to flashrom svn r1090.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
r1063 had several issues: The PCI IDs for this board are copy/pasted from
the A8N and plain wrong for this board and the board enable is marked as
tested although it isn't. Finally the board description was slightly
wrong and the URL missing.
Corresponding to flashrom svn r1071.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Reporter/owner of that board: oscar <oshikore@gmail.com>
http://www.coreboot.org/pipermail/flashrom/2010-April/002910.html
Corresponding to flashrom svn r1040.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The logic was incorrect in one place which had && instead of ||. Move
the board info #define B to the file where it is used.
Corresponding to flashrom svn r1035.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The required "-m" options were not in the wiki output due to a mistake
that I think I introduced recently.
Corresponding to flashrom svn r1027.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Also modifies nvidia_mcp_gpio_set to cope with multiple MCP55 chips on
the same board, like on the Tyan S2915-E.
Corresponding to flashrom svn r1025.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Adis Salcin <crow@linux.org.ba>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, merge the tables in the output, i.e. there's only one table which
contains both known-good and known-bad/untested boards.
Corresponding to flashrom svn r1024.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)
Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.
With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.
Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Corresponding to flashrom svn r1021.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
- Add missing entries for 'flashrom -L' output and wiki output.
- Add missing entries in the manpage.
- nicrealtek.c: Coding style fixes and cosmetics.
Corresponding to flashrom svn r1011.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Change the command line interface to make file names positional.
Add more sanity checks to the command line parser.
Corresponding to flashrom svn r998.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Move boards which had an IT87* SPI board enable from the board enable
list to the OK list.
Mark the Gigabyte GA-MA78GPM-DS2H as OK.
Change the it87spi forced port parameter to it87spiport=...
Fix incorrect indentation in the man page.
Tested by Ward Vandewege on both variants of the Gigabyte GA-M57SLI-S4
http://www.flashrom.org/pipermail/flashrom/2010-March/002712.html
Tested by 李彥學 (Ian-Xue Li) on the Gigabyte GA-MA78GPM-DS2H
http://www.flashrom.org/pipermail/flashrom/2010-March/002723.html
Corresponding to flashrom svn r983.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>
See http://www.coreboot.org/pipermail/flashrom/2010-March/002451.html
Thanks to Paweł Stawicki for reporting!
Corresponding to flashrom svn r980.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
See http://www.coreboot.org/pipermail/flashrom/2010-March/002501.html
Thanks to Konstantin Matuschek for reporting.
Corresponding to flashrom svn r977.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Abit VT6X4 / W29C020C: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002730.html
Fixes typo in comment and marks board-enable as tested (the flashrom
running on that machine was patched with the board enable that got
in later).
Asus A7V133 / Atmel AT29C010A: See
http://www.coreboot.org/pipermail/flashrom/2010-March/002729.html
Adding "erase" to tested as there is only one erase function.
Corresponding to flashrom svn r975.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This board has a supported chipset and a supported bios, but it's
connected indirectly through IT8716 and not recognized.
Corresponding to flashrom svn r935.
Signed-off-by: Raúl Soriano <GatoLoko@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
I have an ASUS A7V8X-X, the BIOS programming requires a write-enable. It
has an IT8712F, just like the A7V600-X.
Corresponding to flashrom svn r929.
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
