TARGET_OS as well as EXEC_SUFFIX were only set when called via the
main makefile and even then __USE_MINGW_ANSI_STDIO was not set
for MinGW.
While at it, also replace the hardcoded gnu_printf printf format
attribute with __MINGW_PRINTF_FORMAT which is set according to
__USE_MINGW_ANSI_STDIO respectively.
Change-Id: Id146f5ba06a0e510397c6f32a2bd7c819a405a25
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/21838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22336
o Move flashbuses_to_text() to flashrom.c, it's not a cli function.
o Guard `!defined(HAVE_STRNLEN)`. This guard was introduced in
23e10b87 (Add a bunch of new/tested stuff and various small
changes 24) to support older BSDs. It's probably completely
broken because HAVE_STRNLEN is presumably a GNU autotools
thing. But we can't fix it without retesting these older BSDs.
Change-Id: I561135209b819361d125eeaeef9ff886d6bae987
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18738
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add an option --ifd to read the ROM layout from an Intel Firmware
Descriptor (IFD). Works the same as the -l option, if given, -i
specifies the images to update.
v2: o Rebased on libflashrom, use libflashrom interface.
o Use functions from ich_descriptors.c.
v3: o Move ich_descriptors.o to LIB_OBJS, thus build it independent
of arch and programmers.
o Bail out if we aren't compiled for little endian.
o Update flashrom.8.tmpl.
v4: o Incorporated David's comments.
o Removed single-character `-d` option.
v5: Changed region names to match the output of `ifdtool --layout ...`
Change-Id: Ifafff2bf6d5c5e62283416b3269723f81fdc0fa3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This renames CLI's print() to flashrom_print_cb() and registers it
through the new libflashrom interface.
v2: Add libflashrom.o to LIB_OBJS now that everything can be linked
together.
Change-Id: Idf19978eb8e340d258199193d2978f37409e9983
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This adds a minimal libflashrom interface based on the draft in the
wiki. While the glue code in libflashrom.c is build on top of the
existing code instead on overhauling it, the interface in libflashrom.h
is supposed to be stable. So we can keep the interface and adapt
internals later if favoured, without breaking clients.
A new make target, libinstall, is also added. It installs libflashrom.a
and libflashrom.h in lib/ and include/ dirs respectively.
Hooking this into the build would break linking of the CLI and is post-
poned until that got fixed.
v2: Rebase and fixes by Anton Kochkov.
v3: o fl_image_*() rewritten with layout support (touch only included regions).
o Moved read/erase/write/verify operations to flashrom.c.
o Added layout pointer and flags to the flash context.
v4: Removed libflashrom.o from LIB_OBJS until CLI is adapted.
v5: o Incorporated David's comments.
o Added `fl_flashprog_t` as dummy parameter to hide the fact that
we have global state all around, and for future-proofness ofc.
v6: o Change namespace prefix to flashrom_.
o Remove typedefs.
Change-Id: I00f169990830aa17b7dfae5eb74010d40c476181
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Inspired by Lynxis' related work, this implements a foundation for
layout based flash access.
All operations iterate over the given layout regions. Erase and write
then walk, per region, over all erase blocks in an inner loop (which
might not be what we want, see note on optimization below). Special care
has been taken that flash content is merged properly, in case an erase
block is only partially covered by a layout region or even affects mul-
tiple regions.
A note on performance: In the case an erase block affects multiple
regions, it will probably be read, erased and written for each region.
Another approach would be to walk all erase blocks once and check for
each erase block which regions it touches (i.e. for each erase block,
merge data pontentially from the flash and all layout regions, then
flash the combined data). That might result in cleaner code. I haven't
tried it yet, though.
Change-Id: Ic6194cea4c4c430e0cf9d586052508a865b09c86
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Introduce `struct flashrom_layout` and refactor layout.c a little, so
we can reuse the layout from there and have other sources of layouts
beside it.
I didn't want to clutter up flash.h any more. So things went into a new
layout.h.
Change-Id: Icea1a58c283131cc9c5fde6f16d783538dc1a4c7
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested mainboards:
OK:
- ASRock G31M-GS
Reported by Александр Трубицын
- ASRock G41M-VS3
Reported by Александр Трубицын
- ASRock N68C-S UCC
Reported by Alexey Belyaev
- ASRock AMCP7AION-HT (ION 330HT(-BD))
Reported by Stefan Tauner
- ASUS P5K SE
Reported by Александр Трубицын
- ASUS P5KPL-VM
Reported by Marin Vlah
- ASUS RAMPAGE III GENE
Reported by stevessss on IRC
- GIGABYTE GA-945GM-S2
Reported by Александр Трубицын
- GIGABYTE GA-945GCM-S2 (rev. 3.0)
Reported by Александр Трубицын
- GIGABYTE GA-965P-S3
Reported by Александр Трубицын
- GIGABYTE GA-EG43M-S2H
Reported by Александр Трубицын
- GIGABYTE GA-EP31-DS3L (rev. 1.0)
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2L
Reported by Александр Трубицын
- GIGABYTE GA-H55M-S2
Reported by Александр Трубицын
- GIGABYTE GA-J1900N-D3V
Reported by Marcos Truchado and Guillermo von Hünefeld
- GIGABYTE GA-K8NS
Reported by nicolae788
- GIGABYTE GA-M56S-S3
Reported by Estevo Paz Freire
- GIGABYTE GA-P31-DS3L
Reported by Александр Трубицын
- GIGABYTE GA-P31-S3G
Reported by Александр Трубицын
- MSI MS-7336
Reported by Benjamin Bellec
- MSI X79A-GD45 (8D) (MS-7760)"
Reported by mortehu on IRC
- Supermicro A1SAi-2550F
Reported by Bernard Grymonpon
- Supermicro X7DWT
Reported by Steven Stremciuc
Laptop:
- ASUS U38N
Reported by Ultra on IRC
- Dell Latitude D630
Reported by Márton Miklós
- Fujitsu Amilo Xi 3650
Reported by Elmar Stellnberger
- Lenovo T400 (whitelisting only)
Chipsets:
- Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
Reported by Jeremy Porter and Bernard Grymonpon
- Add Intel Sunrise Point IDs but no support yet.
Flash chips:
- Atmel AT45DB321D to PREW (+PREW)
Reported by The Raven
- Eon EN25QH32 to PREW (+PREW)
Reported by Josua Mayer
- Eon EN25QH64 to PREW (+EW)
Reported by David s. Alessio
- GigaDevice GD25LQ64(B) to PREW (+PREW)
Reported by Greg Tippit
- Intel 28F001BN/BX-T to PREW (+EW)
Reported by Lu Xie
- Micron M25P10-A to PREW (+W)
Reported by the Raven
- Micron M25PE40
Reported by David Wood
- Micron N25Q128..3E to PREW (+PREW)
Reported by Miklós Márton
- Macronix MX25L3273E to PREW (+PREW)
Reported by Roklobsta on IRC
- Macronix MX23L6454 to PR (+PR)
Reported by Steven Honeyman
- Macronix MX25U6435E/F to PREW (+PREW)
Reported by Marcos Truchado and Guillermo von Hünefeld
- PMC Pm25LQ032C to PREW (+EW)
Reported by Dirk Knop
- Spansion S25FL016A to PREW (+EW)
Reported by Márton Miklós
- Spansion S25FL128S......0 to PREW (+PREW)
Reported by Jim Houston
- Spansion S25FL204K to PR (+PR)
Reported by Thomas Debrunner
- SST SST49LF016C to PREW (+EW)
Reported by Steven Stremciuc
- SST SST39VF040 to PREW (+PREW)
Reported by Xavier Bourgeois
- SST SST49LF040B to PREW (+EW)
Reported by Rikard Åhlund
- ST M25P10-A to PREW (+W)
Reported by Martijn Schiedon
- Winbond W39V040FA to PREW (+EW)
Reported by Евгений Черкашин
- Winbond W39V080FA to PREW (+EW)
Reported by protagonist0 on IRC
- Winbond W25Q80.W to PREW (+PREW)
Reported by Miklós Márton
- Winbond W25X64 to PREW (+REW)
Reported by Johannes Krampf and Manuel Dejonghe
- Fix ID of AMIC A25LQ64
Reported by Roman Titov
- Fix page size of Spansion S25FL129P......1
Copy and paste error from the 128S uniform 256kB variant, probably.
- Add Micron/Numonyx phase-change memory IDs
Miscellaneous:
- Detect Android target OS.
No changes are required to build flashrom (excluding programmers
with NEED_PCI) on Android.
- Update rayerspi (spipgm) URL
- Fix max_data_write handling of at45db.
- Minor refinement of the README
- Mark board enable for the GA-K8NS variants as tested.
Tested by "nicolae788" on a board with socket 754.
- Mark "Multi-system" chassis as non-laptop case.
- Remove W836xx log requests.
We got enough (and no one is looking at them for the time being anyway).
- serprog: improve invalid reply error message, contributed by Urja Rannikko.
- Remove default include paths for MinGW.
- Disable implicit rules in the Makefile because we don't need them and they
just make the build (imperceptibly) slower.
- Enable our own strnlen() implementation not only on DJGPP but also if
HAVE_STRNLEN is not defined. This is needed to get older BSDs
(e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
- Tiny other stuff.
Corresponding to flashrom svn r1917.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Some chips such as the ENE KB9012 internal flash require a write
granularity of 128 bytes.
Corresponding to flashrom svn r1897.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Nico Huber <nico.h@gmx.de>
Tested mainboards:
OK:
- AOpen UK79G-1394 (used in EZ18 barebones)
Reported by Lawrence Gough
- ASUS M4N78 SE
Reported by Dima Veselov
- ASUS P5LD2-VM
Mark board enable as tested (reported by Dima Veselov)
- GIGABYTE GA-970A-UD3P (rev. 2.0)
Reported by trucmar on IRC
- GIGABYTE GA-990FXA-UD3 (rev. 4.0)
Reported by ROKO__ on IRC
- GIGABYTE GA-H77-DS3H (rev. 1.1)
Reported by Evgeniy Edigarev
- GIGABYTE GA-P55-USB3 (rev. 2.0)
Reported by Måns Thörnqvist
- MSI MS-7817 (H81M-E33)
Reported by Igor Kolker
Chipsets:
- Marked Intel Bay Trail (0x0f1c) as tested OK
Reported by Antonio Ospite
- Refine Intel IDs
* Add IDs for Braswell
* Add IDs for 9 Series PCHs (e.g. H97, Z97)
* Rename Wellsburg devices slightly
Flash chips:
- Atmel AT25DF041A to PREW (+PREW)
Reported by Tai-hwa Liang
- Atmel AT26DF161 to PREW (+EW)
Reported by Steve Shenton
- Atmel AT45DB011D to PREW (+PREW)
Reported by The Raven
- Atmel AT45DB642D to PREW (+PREW)
Reported by Mahesh Mokal
- Eon EN25F32 to PREW (+PREW)
Reported by Arman Khodabande
- Eon EN25F40 to PREW (+REW)
Reported by Jerrad Pierce
- Eon EN25QH16 to PREW (+EW)
Reported by Ben Johnson
- GigaDevice GD25Q20(B) to PREW (+PREW)
Reported by Gilles Aurejac
- Macronix MX25U6435E/F to PR (+PR)
Reported by Matt Taggart
- PMC Pm25LV512(A) to PREW (+PREW)
Reported by The Raven
- SST SST39VF020 to PREW (+PREW)
Reported by Urja Rannikko
- Winbond W25Q40.V to PREW (+EW)
Reported by Torben Nielsen
- Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E).
- Add MX25L6465E variant.
- There was never a MX25L12805 AFAICT.
- Split MX25L12805 from models with the same ID but an additional 32 kB
eraser: MX25L12835F/MX25L12845E/MX25L12865E.
- Add a bunch of ST parallel NOR flash chip IDs.
Miscellaneous:
- Whitelist ThinkPad X200.
- Constify master parameter of register_master().
- Remove FEATURE_BYTEWRITES because it was never used at all.
- Refine hwseq messages and make them less prominent.
- Fix the yet unused PRIxCHIPADDR format string thingy.
- Fix copy&paste error in spi_prettyprint_status_register_bp().
Spotted by Pablo Cases.
- Add an additional SMBus controller revision to identify another Yangtze
model. Thanks to Dan Christensen for reporting this issue.
- dediprog: add missing include for stdlib.h.
This fixes (at least) building on FreeBSD and DragonflyBSD with gcc.
- Remove references to struct pci_filter from programmer.h.
It is only needed in internal.c where it has a complete type. Having
it in programmer.h provokes a warning by some old versions of gcc.
- Tiny other stuff.
Corresponding to flashrom svn r1879.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Strnlen() is in POSIX 2008 but was a GNU extension up to glibc 2.10
requiring to define _GNU_SOURCE. This fixes compilation on CentOS 4.9.
Also, move our implementation of strnlen() that was added to support
DJGPP to helpers.c.
Corresponding to flashrom svn r1878.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
We do CPU architecture checks once for the makefile in arch.h and
once for HW access abstraction in hwaccess.c. This patch unifies
related files so that they can share the checks to improve
maintainability and reduce the chance of inconsistencies.
Furthermore, it refines some of the definitions, which
- adds "support" for AARCH64 and PPC64,
- adds big-endian handling on arm as well as LE handling on PPC64,
- fixes compilation of internal.c on AARCH64 and PPC64.
Additionally, this patch continues to unify all OS checks in
flashrom by adding a new helper macro IS_WINDOWS.
The old header file for architecture checking is renamed to platform.h
to reflect its broader scope and all new macros are add in there.
Corresponding to flashrom svn r1864.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1853.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Introduce a variable in doit() that allows to influence
read-before-write and its consequences.
- Modify build_new_image so that it still works even if the old content
is not read before.
- Add copy_old_content() to ease the pain for future patches.
Corresponding to flashrom svn r1851.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The former will be useful in cases where cleanup equals a simple call to free().
Corresponding to flashrom svn r1848.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Create distinct functions for mapping and unmapping for flash chips.
- Map only when needed: map before probing and unmap immediately
after it. Map again when a single chip was probed successfully before
taking any actual actions and clean up afterwards.
- Map special function chip registers centrally together with flash space
instead of within (some) probing methods after successful probes.
- Save the used base addresses of the mappings in struct flashctx as well.
- Do not try to (un)map the zero-sized chip definitions that are merely hacks.
This also fixes the printing of wrong warnings for these chip definitions
introduced in r1765.
Corresponding to flashrom svn r1847.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Begin to move functions that clearly belong to the (command line)
user interface out of flashrom's core files like flashrom.c.
- Refine messages within check_chip_supported(), rename it to
print_chip_support_status() and move it to newly created cli_common.c.
- Move flashbuses_to_text() to cli_common.c as well.
- Move global verbosity variables to cli_output.c.
Corresponding to flashrom svn r1841.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Corresponding to flashrom svn r1831.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add support for EEPROMs with 1 byte granularity and implicit erase on
write. flashrom will not try to erase before write on these chips.
Explicitly requested erase with -E is done by writing 0xff.
Corresponding to flashrom svn r1822.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move some suitable functions there, add it to the Makefile, but leave the
declarations in flash.h for now.
Corresponding to flashrom svn r1819.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Stefan Reinauer has reported ridiculous NULL checks for arrays in our
self_check function found by Coverity (CID1130005). This patch removes
the useless checks but keeps and fixes the one responsible for the
flashchips array by exporting the array size in a new constant.
Corresponding to flashrom svn r1799.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The new enum test_state looks like this:
enum test_state {
OK = 0,
NT = 1, /* Not tested */
BAD, /* Known to not work */
DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */
NA, /* Not applicable (e.g. write support on ROM chips) */
};
The second new state 'NA' is introduced, among other things, to indicate
the erase and write states of real ROMs correctly. This is also implemented
by this patch and required to exchange the previous bit mask in struct
flashchip with a new struct containing an enum test_state for each operation.
The -L output is changed accordingly to print '-' in the case of an N/A state
and the wiki output uses a new template producing a greyed out cell.
Previous users of enum test_state are not affected by this change (yet).
Corresponding to flashrom svn r1798.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r1789.
Inspired by and mostly based on a patch
Signed-off-by: Mark Marshall <mark.marshall@omicron.at>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1784.
Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There is no reason for negative delays in our use cases:
- We don't need it (to work around any quirks).
- sleep() (POSIX) uses an unsigned argument.
- usleep() (POSIX) uses an unsigned argument.
- Sleep() (Windows) uses an unsigned argument.
Change all callees as well (without any complications).
Corresponding to flashrom svn r1782.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This fixes a SEGFAULT if a layout entry is included that addresses memory
outside the current chip's address range. flashrom will only abort if the
offending region(s) is/are included else it will just warn.
It will print warnings for regions with negative or zero-length address ranges
and bail out after checking all of them.
Also, abort for non-write operations if a layout file is given because there is
no layout support for other operations yet.
Corresponding to flashrom svn r1751.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add layout_cleanup() to layout.c and hook it up in cli_classic.c.
Corresponding to flashrom svn r1749.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Unsigned long is not the right type for manipulating pointer values.
Since C99 there are suitable unsigned and signed types available, namely
uintptr_t and intptr_t respectively.
Use them in functions assigned to programmers' map_flash_region fields and
their callers where applicable.
This patch also changes the display width of all associated address values in
physmap.c to 16/8 hex characters depending on the actual size by
introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width
specifier.
Corresponding to flashrom svn r1701.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Improve compilation with libpayload (compiling flashrom.c and
linking is still broken):
- disable Ponyprog (which enforced serial.c compilation)
- make errno available where it is needed
Fix internal.c for non-x86 and enable cb parsing on ARM.
Fix mingw builds by using its __USE_MINGW_ANSI_STDIO macro
and gnu_printf definition for printf format style checking.
See http://sourceforge.net/apps/trac/mingw-w64/wiki/gnu%20printf
This requires inclusion of stdio.h in flash.h.
Fix order of libraries in the Makefile:
FEATURE_LIBS needs to come *after* PCILIBS in case ZLIB is needed by it.
Corresponding to flashrom svn r1697.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Quick hack to print a warning if we skip all blocks in a write
process because they are already equal to the requested image. We
want something like this to make users aware... and some developers
who regularly fall for this too *coughcough*. There might be more
elegant solutions for this... patches welcome.
This does not work for erasing because we do that unconditionally.
Corresponding to flashrom svn r1680.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Newer models support a 66 MHz clock and fast reads.
We should probably distinguish the models better (as we do in ichspi)
and add support for frequency selection etc. For now this has to
suffice.
Corresponding to flashrom svn r1678.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds a number of new granularitie and refines the handling of
n-byte granularities by extracting the respective code into a helper
function which reduces the pain of the above significantly.
Corresponding to flashrom svn r1666.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Macronix MX25U3235 is a 4MB (32Mbits) 1.8v SPI flash supporting QPI.
Code for it was refined after merging it from chromium:
Change-Id: I62c7db070254ba3ec68090e783f57b25a6e8d15a
Reviewed-on: https://gerrit.chromium.org/gerrit/44395
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Based on that support for MX25U1635E and MX25U6435E/F was added
by Stefan Tauner.
Also, add a feature flag for QPI-enabled chips: FEATURE_QPI.
Corresponding to flashrom svn r1655.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
This makes some stuff const (partially to get a more convenient
libflashrom interface).
Corresponding to flashrom svn r1639.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Move all functions related to SPI status registers to a new file
spi25_statusreg.c. This includes the generic as well as the
SST-specific functions from spi25.c and the chip-specific functions
from a25.c and at25.c.
- introduce helper functions
* spi_prettyprint_status_register_hex()
* spi_prettyprint_status_register_bpl()
* spi_prettyprint_status_register_plain()
Use the latter on every compatible flash chip that has no better printlock
function set and get rid of the implicit pretty printing in the SPI probing
functions.
- remove
* spi_prettyprint_status_register_common()
* spi_prettyprint_status_register_amic_a25lq032() because it can be fully
substituted with spi_prettyprint_status_register_amic_a25l032().
* spi_prettyprint_status_register() (old switch, no longer needed)
- promote and export
* spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1().
* spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2().
* spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3().
- add #define TEST_BAD_REW and use it for a number of Atmel chips which
had only TEST_BAD_READ set even though they dont have erasers or a write
function set.
Corresponding to flashrom svn r1634.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Kyösti Mälkki noticed that we unnecessarily read the flash chip twice when
called with --verify. The first one is the mandatory read before everything
(to be able to detect the seriousness of errors), but the second one is not
necessary because we can just use the former for the comparison.
This introduces a small output change: previously we printed ERASE or
VERIFY depending on the callee. This special case has been dropped
because it is unnecessary to print it (and wrong for the verification
function to need to know why it is verifying exactly).
If an erase fails we mention that fact explicitly already, similar for verify.
Corresponding to flashrom svn r1619.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Propagate the error code using return values instead, but let cli_classic.c
still decide the ultimate return value of the process.
Also, remove setting the ret value again after print_supported_wiki() -
success is the default.
Corresponding to flashrom svn r1614.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Corresponding to flashrom svn r1579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Previously boards in the wiki were tagged either as working or as known
bad. But we added support to various boards via board enables that were
then never tested because the owners have not reported back. This can
now be tagged with NT and is shown appropriately.
Also, the underlying data structure indicating state was converted from
macros to an enum while preserving original integer values and is used
for programmers and chipsets too.
Corresponding to flashrom svn r1555.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Corresponding to flashrom svn r1549.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The buffer management of the Bus Pirate driver has been revamped to use
grow-only buffers with a reasonable initial default size so realloc()
will not have to be called in normal operation. A side effect is the
ability to switch to a static buffer without major hassle.
Handle OOM gracefully.
Corresponding to flashrom svn r1541.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Usage: flashrom --output logfile.txt
Logfile output has at least dbg2 verbosity or screen verbosity,
whichever is greater.
Corresponding to flashrom svn r1540.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Linux, Windows and FreeBSD.
Acked-by: Idwer Vollering <vidwer@gmail.com>
