Add...
- S25FL128S
- S25FL256S uniform version (defunct due to addressing)
- S25FL512S uniform version (defunct due to addressing)
Merge Intel S33 status register functions with this one's.
Corresponding to flashrom svn r1692.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- S25FL204K
- S25FL208K
- S25FL216K (same ID as S25FL116K)
Corresponding to flashrom svn r1691.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine status register prettyprinting and unlocking of all family
members and add OTP details.
Corresponding to flashrom svn r1690.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, refine unlocking of A25L032, A25LQ32A and A25LQ032.
Corresponding to flashrom svn r1689.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Add...
- EN25QH64
- EN25QH128
- EN25QH256 (defunct due to addressing)
Corresponding to flashrom svn r1688.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Used for page erase on some chips (e.g. Numonyx M45PE and
Sanyo LF25FW series).
Corresponding to flashrom svn r1682.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- spi_prettyprint_status_register_default_welwip():
It just prettyprints the plain hex value and the welwip bits.
- spi_prettyprint_status_register_default_bp4():
Prints the hex value, welwip, bp0-5 and srwd bits.
- spi_disable_blockprotect_bp2_srwd(),
- spi_disable_blockprotect_bp3_srwd() and
spi_disable_blockprotect_bp4_srwd():
Three new common block unprotection functions for the frequent
cases where there is a status register lock bit at bit #7 and some
block protection bits at bits #2-#4, #2-#5 and #2-#6 respectively.
Corresponding to flashrom svn r1681.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Quick hack to print a warning if we skip all blocks in a write
process because they are already equal to the requested image. We
want something like this to make users aware... and some developers
who regularly fall for this too *coughcough*. There might be more
elegant solutions for this... patches welcome.
This does not work for erasing because we do that unconditionally.
Corresponding to flashrom svn r1680.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
I broke unlocking them correctly in r1635 while refactoring (NB: the
commit log including the overly selfconfident statement about the
"bug in spi_disable_blockprotect_at25df()").
Affected chips have per sector protection bits and the write protection bits
in the status register do indicate if none, some or all sectors are protected.
It is possible to globally (un)lock all sectors at once but in a way that was
not anticipated when refactoring the spi25 unlocking functions into
spi_disable_blockprotect_generic(). To globally unprotect not only the
protection bits (2 and 3) have 0 to be written to them but also bits 4 and 5
which normally would not be touched by spi_disable_blockprotect_generic().
Some of the chips also support a permanent lockdown with fuses which we
do not handle yet.
To fix this without copying the whole method I introduce another mask
parameter to spi_disable_blockprotect_generic() namely unprotect_mask.
See verbose comments inline for details.
Also, prettyprint the status register after trying to disable the block
protection fails.
Corresponding to flashrom svn r1679.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Chi Zhang <zhangchi866@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Newer models support a 66 MHz clock and fast reads.
We should probably distinguish the models better (as we do in ichspi)
and add support for frequency selection etc. For now this has to
suffice.
Corresponding to flashrom svn r1678.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips.
Rename the existing chips and add a .voltage entry where it was missing.
- Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips.
- Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W.
Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=469707f0d9b7d81b6c6bb2cace13f09db70f4382
Corresponding to flashrom svn r1677.
Signed-off-by: Yung-Chieh Lo <yjlou%chromium.org@gtempaccount.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
There is no good reason to collect further log files of locked Intel-
based boards. Forward affected users directly to an explanation in
the wiki instead.
Corresponding to flashrom svn r1675.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Avoid setting SPI speed on firmware versions < 5.0.0 and note this
limitation in the man page.
Use the correct offset of the "12M" element in the spispeeds array to
match our manpage and the default of Dediprog's dpcmd.
Corresponding to flashrom svn r1674.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Thanks to the traces captured and tests done by Martin Roth, and confirmed
by tests and analysis by Joshua Zarr too, we can now use both target chips
on the Dediprog SF100.
Corresponding to flashrom svn r1673.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
We forgot to add a few SPI erase functions to the helper function that is
used for SFDP. Also, sort the declarations in the header.
Corresponding to flashrom svn r1672.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch adds support for
- Pm25LD256C
- Pm25LD512(C)
- Pm25LD010(C)
- Pm25LD020(C)
- Pm25LD040(C)
These seem to be the successors of the Pm25LV series.
The main difference seems to be the dual I/O and additional erase opcodes.
Some support an additional, complex locking register (maybe all of the
above, but available datahsheets do not indicate it for all).
The Pm25LD512C was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1579
Corresponding to flashrom svn r1671.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- Add missing bits and resort chips
- Refine Pm25LV512(A) and Pm25LV010
Due to manufacturer ID continuation this one needs a new probing
function: probe_spi_res3() which should be refactored in the future.
The datasheet describes a very weird order of ID bytes:
Vendor byte, model byte, vendor continuation byte. Let's pretend we did
not read that or the datasheet is bogus (although the datasheet of the
successor series describes the same but luckily additionally to RDID).
- Add Pm25LV010A
This was tested by Chi Zhang:
http://paste.flashrom.org/view.php?id=1573
Corresponding to flashrom svn r1670.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Corresponding to flashrom svn r1669.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It prints to stderr and that's not what we want necesserily;
using msg_*err gives us more control.
Corresponding to flashrom svn r1668.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Handle long sleeps on non-Windows correctly.
Corresponding to flashrom svn r1667.
Signed-off-by: Maksim Kuleshov <mmcx@mail.ru>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds a number of new granularitie and refines the handling of
n-byte granularities by extracting the respective code into a helper
function which reduces the pain of the above significantly.
Corresponding to flashrom svn r1666.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Sockets are not ported (yet).
Tested on Windows 7 with my Atmega32U2 serprog implementation.
http://paste.flashrom.org/view.php?id=1566
Corresponding to flashrom svn r1665.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Check more return codes and close the file handle in case of errors in
sp_openserport().
Corresponding to flashrom svn r1664.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the write part.
This allows to get rid of the explicit temporary disabling of blocking I/O in
serprog's sp_synchronize().
Corresponding to flashrom svn r1662.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
It seems useful to have a generic and platform-independent method to
read and write to a serial port without blocking. This is the read part.
It stores the current blocking properties before disabling blocking and
restores them after reading. The timeout is implemented as previously
by retrying every millisecond until the timeout is reached or enough
characters are available.
Corresponding to flashrom svn r1661.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
MSDN says: "The baud rate at which the communications device
operates. This member can be an actual baud rate value, or one of
the following indexes." But it is not specified what happens for
different values, so we round down to valid ones (or to the minimum
of 9600) by reusing the existing struct baudentry sp_baudtable[] and
the new function round_baud().
Do similarly on non-Windows where arbitrary values are not allowed
anyway.
Corresponding to flashrom svn r1660.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Windows is awkward. The win32 API does not support errno/strerror as one
might expect. Introduce a new msg_* function that alleviates the pain a bit
(my head still hurts very badly).
Corresponding to flashrom svn r1659.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Adds support for the Altera USB-Blaster programming dongle in Active
Serial (AS) mode. Tested on both original product and a clone dongle.
Corresponding to flashrom svn r1658.
Signed-off-by: James Laird <jhl@mafipulation.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similarly to the patch in r1647 this one updates the chips identified as above
with references to and data about their respective twins. Unlike previously this
one deals with the more evil details.
Helge Wagner from GE discovered some problems with chips sharing IDs
and proposed a patch to tackle (some of) them, see:
http://patchwork.coreboot.org/patch/3709/
That patch was bitrotting in our mailboxes for a long time and it is still not
ready for merge, but we increasingly get reports about problems (e.g.
http://paste.flashrom.org/view.php?id=1525) regarding these chips and
hence must act to ensure users' safety.
This patch splits the chip definitions of evil twins into separate ones which
correctly declare the respective attributes (the main problems are the erase
block sizes for the 0x20 opcode and hence my changes combine different
chips with partly different attributes apart from their names as long as the
erasers layout it the same). This forces the user to select the (right) chip
definition with the -c/--chip parameter and hence will break a number of
previously perfectly working environments.
0x2015 is used by and split to
- MX25L1605 (64kB sectors in 0x20 erases)
- MX25L1605A/MX25L1606E (4kB in 0x20 erases and an additional 0x52 opcode with 64kB blocks)
- MX25L1605D/MX25L1608D (4k sectors in 0x20 erases)
0x2016 is used by and split to
- MX25L3205/MX25L3205A (64kB 0x20)
- MX25L3205D/MX25L3208D (4kB 0x20)
- MX25L3206E (4k 0x20, 64k 0x52)
0x2017 is used by and split to
- MX25L6405/MX25L6405D (64k 0x20)
- MX25L6406E/MX25L6436E (4k 0x20)
- MX25L6445E (4k 0x20, 64k 0x52)
Bonus: add some minor details to MX25L1635D, MX25L1635E, MX25L3235D,
MX25L12805D.
Tested with MX25L3206E, MX25L64036E.
Corresponding to flashrom svn r1657.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
New IDs taken from Intel's patches for the Linux kernel.
Also, refine original Lynx Point naming etc.
Corresponding to flashrom svn r1656.
Based on the chromiumos patch
Change-Id: I303a05baa80e4449e70d20adf78ebc7128b88d8e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Macronix MX25U3235 is a 4MB (32Mbits) 1.8v SPI flash supporting QPI.
Code for it was refined after merging it from chromium:
Change-Id: I62c7db070254ba3ec68090e783f57b25a6e8d15a
Reviewed-on: https://gerrit.chromium.org/gerrit/44395
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Based on that support for MX25U1635E and MX25U6435E/F was added
by Stefan Tauner.
Also, add a feature flag for QPI-enabled chips: FEATURE_QPI.
Corresponding to flashrom svn r1655.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This allows to list yet unsupported chips easily.
First it tries to find the directory containing the files, then it uses sed to
extract the macro names of chips from flashchips.h, greps for them in
flashchips.c and prints it if it is not found.
If verbose mode is activated by giving at least one additional parameter
it prints the chip ID and comment following the macro definition too.
Corresponding to flashrom svn r1654.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
REed by roxfan and Michael Karcher, patch by Stefan Tauner.
Corresponding to flashrom svn r1653.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This older (ST-branded) revision of M25P20 chip does not support RDID and
hence was not detected correctly. This patch adds a workaround similar
to M25P40-old.
Corresponding to flashrom svn r1652.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The following rates are
available (in Hz):
375k, 750k, 1.5M, 2.18M, 3M, 8M, 12M and 24M
The original driver reinitializes the programmer after setting the
speed, so the initialization calls have moved into a new function
dediprog_setup() which is called twice.
Corresponding to flashrom svn r1649.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- Add a new macro named IS_MACOSX to hwaccess.c and use it to enable iopl().
This was broken since r1638. This fix does *not* restore the very permissive
concept where iopl() was activated in an #else branch that was inplace before
r1638.
- Make printing the image file's size in flashrom.c platform independent.
Bonus: remove definitions of off64_t and lseek64 which are not necessary
anymore for about 1000 commits.
Thanks to SJ for reporting the issue and testing the solution.
Corresponding to flashrom svn r1648.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Update MX25L512 with references to and data about
MX25L512E, MX25V512, MX25V512C.
Update MX25L1005 with references to and data about
MX25L1005C, MX25L1006E.
Update MX25L2005 with references to and data about
MX25L2005C.
Update MX25L4005 with references to and data about
MX25L4005A, MX25L4005C.
Update MX25L8005 with references to and data about
MX25V8005.
Bonus: add chip IDs of MX25U1635E, MX25U3235E/F, MX25U6435E/F.
Corresponding to flashrom svn r1647.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Thanks to Idwer and clang for noticing these problems.
Corresponding to flashrom svn r1646.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Pcidev_init() now returns struct pci_device * instead of a BAR stored in
PCI config space. This allows for real error checking instead of having
exit(1) everywhere in pcidev.c.
Thanks to Niklas Söderlund for coming up with the original error
handling patch which was slightly modified and folded into this patch.
Move the declaration of struct pci_device in programmer.h before the
first user.
Corresponding to flashrom svn r1644.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, unify all outputs of "Warning:" and "Error:" to use normal
capitalization instead of mixing it with all capitals.
Corresponding to flashrom svn r1643.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Previously the internal programmer used its own code to initialize pcilib.
This patch extracts the common code from the internal programmer and
pcidev_init() into pcidev_init_common().
This fixes the non-existent PCI cleanup of the internal programmer and adds
an additional safety by checking for an already existing PCI context.
We got a nice shutdown function registration infrastructure, but did not use it
very wisely. Instead we added shutdown functions to a myriad of programmers
unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc)
by adding a shutdown function the pcidev.c itself that gets registered by
pcidev_init().
Corresponding to flashrom svn r1642.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
