AT25DF021 AT25DF041A AT25DF081 AT25DF161 AT25DF321 AT25DF321A AT25DF641
AT25F512B AT25FS010 AT25FS040 AT26DF081A AT26DF161 AT26DF161A AT26DF321
AT26F004
Straight from the data sheets, untested because I lack the hardware.
Corresponding to flashrom svn r376 and coreboot v2 svn r3853.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
- Remove the copyright listings and refer the reader to the source
files.
- Update the author list to those which have copyright messages in the
source files.
- Correct the license from GPL v2+ to (GPL v2, with some files under
later versions as well)
Corresponding to flashrom svn r375 and coreboot v2 svn r3852.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The explicit initialization makes sure any future struct flashchip
reordering is not needed. (Except for the case where we need arrays
of some of the struct members.)
Corresponding to flashrom svn r374 and coreboot v2 svn r3851.
Signed-off-by: Stephan Guilloux <mailto:stephan.guilloux@free.fr>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r373 and coreboot v2 svn r3850.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r372 and coreboot v2 svn r3849.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r371 and coreboot v2 svn r3848.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Fix that by throwing an error instead.
Corresponding to flashrom svn r370 and coreboot v2 svn r3834.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
There seem to be at least two versions of the board out there, and the
subsystem IDs changed between the versions.
Patch successfully tested on hardware.
Corresponding to flashrom svn r369 and coreboot v2 svn r3833.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
* add a generic preop-opcode-pair table.
* rename ich_check_opcodes to ich_init_opcodes.
* let ich_init_opcodes do not need to access flashchip structure:
. move the definition of struct preop_opcode_pair to a better place
. remove preop_opcode_pairs from 'struct flashchip'
. modify ich_init_opcodes and generate_opcodes so that they do not access the flashchip structure
* call ich_init_opcodes during chipset enable. Now OPCODES generation mechanism works.
* fix a coding style mistake.
Corresponding to flashrom svn r367 and coreboot v2 svn r3814.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
MX29LV040C probe and read support tested by khetzal on IRC.
Corresponding to flashrom svn r366 and coreboot v2 svn r3809.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r364 and coreboot v2 svn r3805.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Corresponding to flashrom svn r363 and coreboot v2 svn r3804.
Signed-off-by: FENG yu ning <fengyuning1984@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This patch adds SB700 support to flashrom. The code for enabling the flash
rom is the same as for SB600. It was tested (read, write, verify) with an
ASUS M3A-H/HDMI which contains a Macronix MX25L8005.
Corresponding to flashrom svn r361 and coreboot v2 svn r3799.
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Acked-by: Peter Stuge <peter@stuge.se>
Thanks to Niels Ole Salscheider for the problem report.
Corresponding to flashrom svn r360 and coreboot v2 svn r3798.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
Flashrom used to exit 0 even if erase failed. Not anymore.
Corresponding to flashrom svn r359 and coreboot v2 svn r3797.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
SST_25VF512A_REMS
SST_25VF010_REMS
SST_25VF020_REMS
SST_25VF040_REMS
SST_25VF040B_REMS
SST_25VF080_REMS
SST_25VF080B_REMS
SST_25VF032B_REMS
SST_26VF016
SST_26VF032
W_25X16
W_25X32
W_25X64
Straight from the data sheets.
The REMS IDs help in case the RDID opcode is unavailable (due to opcode
lockdown) or unsupported by the chip.
Some day, we need to pair probe functions together with IDs. Multiple
pairs can exist per chip and duplicating chip definitions does not
really make sense.
Corresponding to flashrom svn r358 and coreboot v2 svn r3793.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Bug from r3791.
Corresponding to flashrom svn r357 and coreboot v2 svn r3792.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
If flashbase was set before probe_flash() it would only ever be used once, for
the very first flash chip probe.
Corresponding to flashrom svn r356 and coreboot v2 svn r3791.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
Corresponding to flashrom svn r354 and coreboot v2 svn r3782.
Signed-off-by: Jason Wang <Qingpei.wang@amd.com>
Reviewed-by: Joe, Bao <Zheng.Bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
If a chip has any TEST_BAD_* flag set, we don't even list the
unsupported functions, giving the user the impression that the
unsupported functions are tested.
Corresponding to flashrom svn r352 and coreboot v2 svn r3780.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
This has been tested by Uwe Hermann on an RS690/SB600 board.
Corresponding to flashrom svn r351 and coreboot v2 svn r3779.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This is the first chip which uses the infrastructure for alternative
erase commands, namely spi_chip_erase_60_c7().
Corresponding to flashrom svn r350 and coreboot v2 svn r3776.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- probe_spi_rdid with opcode 0x9f, usually 3 bytes ID
- probe_spi_res with opcode 0xab, usually 1 byte ID
We are missing the following probe function:
- probe_spi_rems with opcode 0x90, usually 2 bytes ID
RDID provides best specifity (manufacturer, device class and device) and
RES is supported by quite a few old chips. However, RES only returns one
byte and there are multiple flash chips with different sizes on the
market and all of them have the same RES ID.
REMS is from the same age as RES, but it provides a manufacturer and a
device ID. It is therefore on par with the probing for parallel flash
chips and specific enough.
The order in which chips should be detected is as follows:
1. RDID
2. REMS
3. RES
Corresponding to flashrom svn r349 and coreboot v2 svn r3775.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
The existing check in probe_spi_res() was right for SPI controllers
which support all commands, but may not exist. For controllers which
support only a subset of commands, it will fail in unexpected ways. Even
if a command is supported by the controller, it may be unavailable if
the controller is locked down.
The new logic checks if RDID could be issued and its return values
made sense (not 0xff 0xff 0xff). In that case, RES probing is not
performed. Otherwise, we try RES. There is one drawback: If RDID
returned unexpected values, we don't issue a RES probe. However, in that
case we should try to match RDID anyway.
Corresponding to flashrom svn r348 and coreboot v2 svn r3774.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: FENG yu ning <fengyuning1984@gmail.com>
Tested on gigabyte m57sli.
File util/flashrom/flash.h already had correct ID for that part.
Corresponding to flashrom svn r347 and coreboot v2 svn r3769.
Signed-off-by: Tero O Peippola <xeropp@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Currently flashrom assumes every vendor BIOS shares our view about which
SPI opcodes should be placed in which location.
Move to a less optimistic implementation and actually use the generic
SPI read functions. They're useful for abstracting exactly this stuff
and that makes them the preferred choice.
Corresponding to flashrom svn r346 and coreboot v2 svn r3758.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Although SPI itself does not have a mechanism to signal command failure,
the SPI host may be unable to send a given command over the wire due
to security or hardware limitations. The current code ignores these
mechanisms completely and simply assumes almost every command succeeds.
Complain if SPI command execution fails.
Since locked down Intel chipsets (like the one we had problems with
earlier) only allow a small subset of commands, find the common subset
of commands between the chipset and the ROM in the chip erase case. That
is accomplished by the new spi_chip_erase_60_c7() which can be used for
chips supporting both 0x60 and 0xc7 chip erase commands.
Both parts of the patch address problems seen in the real world. The
increased verbosity for the error case will help us diagnose and address
problems better.
Corresponding to flashrom svn r345 and coreboot v2 svn r3757.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Otherwise: Acked-by: Stefan Reinauer <stepan@coresystems.de>
AT25DF021
AT25DF041A
AT25DF081
AT25DF161
AT25DF321A
AT25DF641
AT25F512B
AT25FS010
AT25FS040
AT26DF041
AT26DF081A
AT26DF161
AT26DF161A
AT26DF321
AT26F004
I double-checked the data sheets and am confident this will work.
Corresponding to flashrom svn r344 and coreboot v2 svn r3756.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Tested fully on a ThinCan DBE61A
Corresponding to flashrom svn r343 and coreboot v2 svn r3755.
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
The AT45 series SPI chips are DataFlash EEPROMs which means they have
odd (non-power-of-two) sector sizes, but some of the DataFlash chips can
be configured or ordered with power-of-two sector sizes.
Add probe support for the following Atmel SPI chips:
AT25DF021
AT25DF041A
AT25DF081
AT25DF161
AT25DF321A
AT25DF641
AT25F512B
AT25FS010
AT25FS040
AT26DF041
AT26DF081A
AT26DF161
AT26DF161A
AT26DF321
AT26F004
AT45CS1282
AT45DB011D
AT45DB021D
AT45DB041D
AT45DB081D
AT45DB161D
AT45DB321C
AT45DB321D
AT45DB642D
Add an explanation why the following chips can't be probed:
AT45BR3214B
AT45D011
AT45D021A
AT45D041A
AT45D081A
AT45D161
AT45DB011
AT45DB011B
AT45DB021A
AT45DB021B
AT45DB041A
AT45DB081A
AT45DB161
AT45DB161B
AT45DB321
AT45DB321B
AT45DB642
Add the ID, but no probing function for this chip:
AT25F512A
Corresponding to flashrom svn r342 and coreboot v2 svn r3754.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andriy Gapon <avg@icyb.net.ua>
Acked-by: Myles Watson <mylesgw@gmail.com>
Per report from Mario Rogen. Thanks!
Corresponding to flashrom svn r341 and coreboot v2 svn r3736.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
This has been confirmed by Stéphan Guilloux.
Corresponding to flashrom svn r340 and coreboot v2 svn r3731.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This helps a lot if we have to track down configuration weirdnesses.
Corresponding to flashrom svn r338 and coreboot v2 svn r3723.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Not all chips support all commands, so allow the implementer to select
the matching function. Fix a layering violation in ICH SPI code to be
less bad. Still not perfect, but the new code is shorter, more generic
and architecturally more sound.
TODO (in a separate patch): - move the generic sector erase code to
spi.c - decide which erase command to use based on info about the chip -
create a generic spi_erase_all_sectors function which calls the generic
sector erase function
Thanks to Stefan for reviewing and commenting.
Corresponding to flashrom svn r337 and coreboot v2 svn r3722.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This is slightly slower (ha, ha), but works on boards with a locked
opmenu. Tested on ICH7 and works.
Corresponding to flashrom svn r336 and coreboot v2 svn r3721.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- SST SST39SF010A
- Winbond W29C011
Tested by me on actual hardware, all operations.
Corresponding to flashrom svn r334 and coreboot v2 svn r3708.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Using block erase d8 as discussed with Peter Stuge
Corresponding to flashrom svn r333 and coreboot v2 svn r3707.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Corresponding to flashrom svn r332 and coreboot v2 svn r3706.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Ed Swierk <eswierk@aristanetworks.com>
Tested by Martin Stecklum <stecky@gmx.net> (both write and erase).
The tests were done on an MSI MS-7065 board, so that's supported now too.
Corresponding to flashrom svn r331 and coreboot v2 svn r3697.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Untested, but should work just as well as the other *PIIX* southbridges
according to the datasheets.
Corresponding to flashrom svn r330 and coreboot v2 svn r3696.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
