1
0
mirror of https://review.coreboot.org/flashrom.git synced 2025-04-26 22:52:34 +02:00
Matt DeVillier b9e0a3ce70 cli_classic.c: Make -r/-w/-v argument optional when using -i
Make the filename parameter directly following -r/-w/-v optional, since
the -i parameter allows the image to be written to be sourced from
multiple files, regions to be read from flash and written to separate
image files, and regions to be verified using an image file only
containing that region.

Since the filename parameter following -w/-v was ignored when a
filename was specified following `-i <region>:<filename>`, this patch
essentially removes the requirement to provide an unused parameter.

Based on https://review.coreboot.org/c/flashrom/+/52362.

TEST=run the following commands on a supported board:
flashrom -p internal -r /tmp/coreboot.rom
flashrom -p internal -r --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -r /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin
flashrom -p internal -w /tmp/coreboot.rom
flashrom -p internal -w --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -w /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin
flashrom -p internal -v /tmp/coreboot.rom
flashrom -p internal -v --ifd -i bios:/tmp/coreboot.rom
flashrom -p internal -v /tmp/coreboot.rom --ifd -i bios:/tmp/bios.bin

Change-Id: I6eba095d478f1a7bdbc3854627a656f93dd9e452
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/85159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
2024-12-06 06:15:56 +00:00
2024-10-01 04:51:21 +00:00
2024-09-08 08:13:30 +00:00
2024-08-12 00:09:12 +00:00
2007-09-08 14:36:01 +00:00
2023-03-28 00:36:36 +00:00
2024-03-08 12:30:13 +00:00
2024-08-22 01:22:27 +00:00
2024-11-11 02:16:31 +00:00
2024-08-12 00:09:12 +00:00
2024-11-11 02:16:31 +00:00
2024-11-11 02:16:31 +00:00
2019-07-31 08:26:59 +00:00

flashrom README
===============

flashrom is a utility for detecting, reading, writing, verifying and erasing
flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images
in-system using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

It supports a wide range of flash chips (most commonly found in SOIC8, DIP8,
SOIC16, WSON8, PLCC32, DIP32, TSOP32, and TSOP40 packages), which use various
protocols such as LPC, FWH, parallel flash, or SPI.

Do not use flashrom on laptops (yet)! The embedded controller (EC) present in
many laptops might interact badly with any attempts to communicate with the
flash chip and may brick your laptop.

Please make a backup of your flash chip before writing to it.

Please see the flashrom(8) manpage :doc:`classic_cli_manpage`.


Building / installing / packaging
---------------------------------

flashrom is built with **meson**. TLDR:

::

    meson setup builddir
    meson compile -C builddir
    meson test -C builddir
    meson install -C builddir

For full detailed instructions, follow the information in
:doc:`dev_guide/building_from_source`

Contact
-------

The official flashrom website is:

  https://www.flashrom.org/

For available contact methods see :doc:`contact`
Description
No description provided
Readme 75 MiB
Languages
C 90.2%
Rust 5%
Shell 2%
Makefile 1.6%
Meson 1.2%