Add external programmer delay functions so external programmers can
handle the delay on their own if needed.
Corresponding to flashrom svn r578.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Urja Rannikko <urjaman@gmail.com>
It doesn't make sense to probe for SPI chips on a LPC host, nor does it
make sense to probe for LPC chips on a Parallel host.
This change is backwards compatible, but adding host protocol info to
chipset init functions will speed up probing.
Once all chipset init functions are updated and the Winbond W29EE011 and
AMIC A49LF040A chip definitions are updated, the W29EE011 workaround can
be deleted as the W29/A49 conflict magically disappears.
Corresponding to flashrom svn r560.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on real hardware and
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This is a fast way to test if a IT87xx board_enable() would work.
Corresponding to flashrom svn r557.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Harald Gutmann <harald.gutmann@gmx.net>
Right now, the annotation only differentiates between SPI and non-SPI.
Anyone who knows more about a specific flash chip should feel free to
update it.
The existing flashbus variable was abused to denote the SPI controller
type. Use an aptly named variable for that purpose.
Once this patch is merged, the chipset/programmer init functions can set
supported flash chip types and flashrom can automatically select only
matching probe/read/erase/write functions. A side benefit of that will
be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict.
Corresponding to flashrom svn r556.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
We had duplicated code under different names and even open-coded some
functions in some places.
wbsio_read/regval -> sio_read wbsio_write/regwrite -> sio_write
wbsio_mask -> sio_mask
board_biostar_p4m80_m4 now uses existing IT87 functions.
Corresponding to flashrom svn r547.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Build-tested on 32bit x86.
Corresponding to flashrom svn r521.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Change SPI architecture to handle 1-byte chunk chip writing differently
from 256-byte chunk chip writing.
Annotate SPI chip write functions with _256 or _1 suffix denoting the
number of bytes they write at maximum.
The 1-byte chunk writing is cut-n-pasted to different SPI drivers right
now. A later patch can move them to the generic spi_chip_write_1.
Corresponding to flashrom svn r485.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Until the ICH SPI driver can handle preopcodes as standalone opcodes,
we should handle such special opcode failure gracefully on ICH and
compatible chipsets.
This fixes chip erase on almost all ICH+VIA SPI masters.
Thanks to Ali Nadalizadeh for helping track down this bug!
Corresponding to flashrom svn r484.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r326 and coreboot v2 svn r3669.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
While writing a new SPI driver I fixed some things in the SPI code:
All calls to spi_command() had unneccessary #define duplications, and in some
cases the read count define could theoretically become harmful because NULL was
passed for the read buffer. Avoid a crash, should someone change the #defines.
I also noticed that the only caller of spi_page_program() was the it87 driver,
and spi_page_program() could only call back into the it87 driver. Removed the
function for easier-to-follow code and made it8716f_spi_page_program() static.
The ichspi driver's static page functions are already static.
Corresponding to flashrom svn r302 and coreboot v2 svn r3418.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
At some point the flash bus will be part of struct flashchip.
Pardon me for pushing this in, but I think it is important to beware of further
decay and it will improve things for other developers in the short run.
Carl-Daniel, I will consider your suggestions in another patch. I want to keep
things from getting too much for now. The patch includes Rudolf's VIA SPI
changes though.
Corresponding to flashrom svn r285 and coreboot v2 svn r3401.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This patch addresses different argument order of outX() calls,
FreeBSD-specific headers, difference in certain type names and system
interface names, and also FreeBSD-specific way of gaining IO port
access.
Corresponding to flashrom svn r245 and coreboot v2 svn r3344.
Signed-off-by: Andriy Gapon <avg@icyb.net.ua>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
