An internal security audit of the flashrom project by
Carl-Daniel Hailfinger found a buffer overflow bug present in all
flashrom versions since the year 2005.
This bug was independently found and reported to flashrom.org by
Cosmin Gorgovan a few days ago.
A buffer on the stack and a buffer on the heap are affected by the
overflow caused by an incorrect fscanf format string.
The buffer overflow can only be triggered if the optional layout feature
is used and if the user manually specifies a specially crafted layout
file on the command line. Command line parsing and flash image handling
do not trigger the buggy code path.
Most usage of flashrom does not involve layout files.
The fix in this commit (changed fscanf format string) can be applied to
layout.c of all past flashrom versions.
Corresponding to flashrom svn r1953.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Implement serial port shutdown both for regular termination and error
conditions in pony_spi.
Corresponding to flashrom svn r1952.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- ASRock Fatal1ty 970 Performance and P4i65G
Reported by anonymous email message ID:
932677687262b1300eaf14260999d9262c31@guerrillamail.com
The latter actually had a tested board enable already.
Flash chips:
- Eon EN25Q128 to PREW (+PREW)
Reported by Adrian Graham
- GigaDevice GD25VQ41B to PREW (+PREW)
Reported by David Hendricks
- Winbond W39V040FB to PREW (+EW)
Reported by fjed on IRC
Miscellaneous:
- Change PCI IDs of "MS-6577 (Xenon)" board enable.
The previous IDs contained the on-board display adapter which is
disabled when a dedicated graphics card is installed.
- Add a note to the README how to overcome the clang warning if only a
single programmer is enabled.
- Fix some typo and manpage problems found by lintian
- r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
This patch corrects that.
- Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
Previous PCI IDs were board-specific but ot the other of devices
that could be disabled by the firmware or that vary among
hardware revions. There are no good alternatives available.
However, since we always have a DMI decoder available now, we can
use non-board-specific devices without taking risks. Thanks to
Uwe Hermann for reporting and testing.
- Some other small changes to clean up whitespace and fix some warnings
from Debian's lintian.
Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This came up when I was testing if building on SunOS still works
on the buildbot's instance of OmniOS r151014 which is based on illumos.
The fix is
- to link against libnsl
- a small C type fix in ich_descriptor_tool
Corresponding to flashrom svn r1950.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Specifying spispeed=reserved as programmer parameter resulted in
selecting the default SPI speed instead of aborting. Rewrite the logic
to be more readable.
Corresponding to flashrom svn r1949.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Allow mstarddc_spi and pony_spi on Android.
Allow mstarddc_spi and pony_spi on architectures with unsupported raw
access.
Corresponding to flashrom svn r1946.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Apparently, there is at least one board of Russian origin (coined
SPI_TT LPT) that works with SPI Tiny Tools which is a closed-source
Windows GUI program somewhat similar to flashrom.
Corresponding to flashrom svn r1945.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
All credit for this should be given to Patrick Georgi (see r1869).
Corresponding to flashrom svn r1944.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Only hardware not needing raw access (PCI, memory, port I/O) is supported.
Corresponding to flashrom svn r1943.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Even though there is currently only one USB device ID in the wild using our
standard way to define the devices creates nicer output for -L and -z.
Corresponding to flashrom svn r1942.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Even though there is currently only one USB device ID in the wild using our
standard way to define the devices creates nicer output for -L and -z.
Corresponding to flashrom svn r1941.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The atapromise module uses the rom_size field of the struct pci_dev found
in pci.h that does not exist in libpayload's implementation and thus does
not compile with libpayload.
Corresponding to flashrom svn r1938.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This is especially helpful for compile tests with CONFIG_EVERYTHING=yes,
but can also be used without CONFIG_EVERYTHING.
Usage:
make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no
CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no
Corresponding to flashrom svn r1936.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We do not support PCI port I/O on non-x86 (yet).
Atapromise needs PCI port I/O.
Corresponding to flashrom svn r1935.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
CONFIG_RAYER_SPI only needs raw hardware access, but not libpci.
Disable CONFIG_RAYER_SPI on Android because of missing inb/outb.
Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O
and MSR access.
Corresponding to flashrom svn r1934.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The solution was discovered in a collaborative bug hunt with testing done by
David Hendricks. The actual culprit was found by Urja Rannikko by comparing
vanilla flashrom with David's version in chromiumos.
Corresponding to flashrom svn r1933.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: David Hendricks <dhendrix@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This won't make raw I/O work magically but at least it would provide iopl()
if some driver requires it and there is no better alternative currently.
Corresponding to flashrom svn r1932.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Command line arguments given when executing make should not stop us
from setting commonly user-configurable variables like CPPFLAGS or
LDFLAGS.
Without this patch 'make CPPFLAGS="-Ifail"' would fail to find
libusb1 headers and abort.
Add override statements where we append mandatory options to
these variables to make (Debian) packagers more happy.
Also, r1920 introduced some explicit calls to pkg-config instead of
$(PKG_CONFIG). This patch corrects that as well.
Corresponding to flashrom svn r1931.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The current code is checking model_id to remember if a chip has already
been limited, but if flashchips.c contains two subsequent chips with
different vendor_id but identical model_id the adjustment will not be
done. Switch to checking the chip size instead.
If a chip has multiple whole-chip erase functions, only one will be
modified. Fix that.
Corresponding to flashrom svn r1930.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Acked-by: Urja Rannikko <urjaman@gmail.com>
This patch is based on Nico Huber's original version that was rebased
by David Hendricks for Chromium OS in
Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23
Corresponding to flashrom svn r1929.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
As per e-mail with Dediprog, command 0x0B (which is not listed in the
command spec) is need on older Dediprogs only. SF100 with firmware
V6.0.0 and newer as well as all SF600 programmers do not support it.
The original wording by Dediprog was: "0x0B is used to adjust voltage
level, but it's available for some version of SF100 only. SF100 of
firmware V6.x.x and all version of SF600/SF600Plus not support this
command. If you have old version of SF100, 0x0B is still needed."
This patch renames dediprog_device_init() to something more
appropriate and adds comments for clarity, and only runs it
conditionally if we cannot query the devicestring initially.
Based on ChromiumOS'
Change-Id: I42de7d28401d7ad5be8fcf8a8c165e2614a45960
Corresponding to flashrom svn r1928.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch is based on a number of changes by David Woodhouse and
David Hendricks.
SF600 uses two bulk endpoints, 1 for out and 2 for in unlike the
SF100 that uses only a single one. This patch make endpoint usage
more explicit and sets the in/out endpoint(s) appropriately for
SF100 and SF600.
Also, change all SF100-specific strings in messages and
leave standalone mode on SF600s.
Corresponding to flashrom svn r1927.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
If libpci, libusb0 or libusb1 are missing, make will now tell you which
currently enabled features require those libraries.
Example output:
Checking for libusb-0.1/libusb-compat headers... not found.
The following features require libusb-0.1/libusb-compat:
CONFIG_PICKIT2_SPI CONFIG_DEDIPROG.
Please install libusb-0.1 headers or libusb-compat headers.
See README for more information.
Corresponding to flashrom svn r1926.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.
Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808
Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.
Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:
- The clock divisor is set to '6', as this creates a 10MHz SPI clock,
which is the same SPI clock that the chromiumos branch produced.
- Add udev rule for Google servo boards to util/flashrom.rules.
- Add Google servo entry to manpage.
Corresponding to flashrom svn r1925.
Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Hatim Kanchwala <hatim@hatimak.me>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Hatim Kanchwala <hatim@hatimak.me>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
We use a header for MSR accesses on AMD Geodes that does only exist
on 32 bit x86 machines.
Corresponding to flashrom svn r1924.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The earlier versions of the chip require 0x2AAA for probes thus split the
definitions and set them to untested to provoke reports.
Corresponding to flashrom svn r1922.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This allows for even more easy debugging of build failures due to
problems with libraries.
Corresponding to flashrom svn r1919.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The new protocol changes some commands, so adjust the code to support
these. Use helper functions to reduce duplication in libusb calls. Testing
with real hardware showed that the maximum read size via the control
endpoint is about 16 bytes although specification does not mention that.
Dediprog SF600 is not supported yet.
Based on the following chromiumos changes:
Change-Id: Ibd1e27d9e8273ba879b9b5d95675b99596255c89
Change-Id: Ifc33e7b1eed5b0cb80f83458fa24741a577fa46a
Additionally, some ideas from Alex for cleaner code were incorporated as well.
Tested on an SF100 V4 with both firmware generations PREWing a M25PX80
and AT45DB041D (the latter is using dediprog_spi_send_command() instead
of optimized functions which make it a good test vehicle).
Corresponding to flashrom svn r1918.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested mainboards:
OK:
- ASRock G31M-GS
Reported by Александр Трубицын
- ASRock G41M-VS3
Reported by Александр Трубицын
- ASRock N68C-S UCC
Reported by Alexey Belyaev
- ASRock AMCP7AION-HT (ION 330HT(-BD))
Reported by Stefan Tauner
- ASUS P5K SE
Reported by Александр Трубицын
- ASUS P5KPL-VM
Reported by Marin Vlah
- ASUS RAMPAGE III GENE
Reported by stevessss on IRC
- GIGABYTE GA-945GM-S2
Reported by Александр Трубицын
- GIGABYTE GA-945GCM-S2 (rev. 3.0)
Reported by Александр Трубицын
- GIGABYTE GA-965P-S3
Reported by Александр Трубицын
- GIGABYTE GA-EG43M-S2H
Reported by Александр Трубицын
- GIGABYTE GA-EP31-DS3L (rev. 1.0)
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2L
Reported by Александр Трубицын
- GIGABYTE GA-H55M-S2
Reported by Александр Трубицын
- GIGABYTE GA-J1900N-D3V
Reported by Marcos Truchado and Guillermo von Hünefeld
- GIGABYTE GA-K8NS
Reported by nicolae788
- GIGABYTE GA-M56S-S3
Reported by Estevo Paz Freire
- GIGABYTE GA-P31-DS3L
Reported by Александр Трубицын
- GIGABYTE GA-P31-S3G
Reported by Александр Трубицын
- MSI MS-7336
Reported by Benjamin Bellec
- MSI X79A-GD45 (8D) (MS-7760)"
Reported by mortehu on IRC
- Supermicro A1SAi-2550F
Reported by Bernard Grymonpon
- Supermicro X7DWT
Reported by Steven Stremciuc
Laptop:
- ASUS U38N
Reported by Ultra on IRC
- Dell Latitude D630
Reported by Márton Miklós
- Fujitsu Amilo Xi 3650
Reported by Elmar Stellnberger
- Lenovo T400 (whitelisting only)
Chipsets:
- Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
Reported by Jeremy Porter and Bernard Grymonpon
- Add Intel Sunrise Point IDs but no support yet.
Flash chips:
- Atmel AT45DB321D to PREW (+PREW)
Reported by The Raven
- Eon EN25QH32 to PREW (+PREW)
Reported by Josua Mayer
- Eon EN25QH64 to PREW (+EW)
Reported by David s. Alessio
- GigaDevice GD25LQ64(B) to PREW (+PREW)
Reported by Greg Tippit
- Intel 28F001BN/BX-T to PREW (+EW)
Reported by Lu Xie
- Micron M25P10-A to PREW (+W)
Reported by the Raven
- Micron M25PE40
Reported by David Wood
- Micron N25Q128..3E to PREW (+PREW)
Reported by Miklós Márton
- Macronix MX25L3273E to PREW (+PREW)
Reported by Roklobsta on IRC
- Macronix MX23L6454 to PR (+PR)
Reported by Steven Honeyman
- Macronix MX25U6435E/F to PREW (+PREW)
Reported by Marcos Truchado and Guillermo von Hünefeld
- PMC Pm25LQ032C to PREW (+EW)
Reported by Dirk Knop
- Spansion S25FL016A to PREW (+EW)
Reported by Márton Miklós
- Spansion S25FL128S......0 to PREW (+PREW)
Reported by Jim Houston
- Spansion S25FL204K to PR (+PR)
Reported by Thomas Debrunner
- SST SST49LF016C to PREW (+EW)
Reported by Steven Stremciuc
- SST SST39VF040 to PREW (+PREW)
Reported by Xavier Bourgeois
- SST SST49LF040B to PREW (+EW)
Reported by Rikard Åhlund
- ST M25P10-A to PREW (+W)
Reported by Martijn Schiedon
- Winbond W39V040FA to PREW (+EW)
Reported by Евгений Черкашин
- Winbond W39V080FA to PREW (+EW)
Reported by protagonist0 on IRC
- Winbond W25Q80.W to PREW (+PREW)
Reported by Miklós Márton
- Winbond W25X64 to PREW (+REW)
Reported by Johannes Krampf and Manuel Dejonghe
- Fix ID of AMIC A25LQ64
Reported by Roman Titov
- Fix page size of Spansion S25FL129P......1
Copy and paste error from the 128S uniform 256kB variant, probably.
- Add Micron/Numonyx phase-change memory IDs
Miscellaneous:
- Detect Android target OS.
No changes are required to build flashrom (excluding programmers
with NEED_PCI) on Android.
- Update rayerspi (spipgm) URL
- Fix max_data_write handling of at45db.
- Minor refinement of the README
- Mark board enable for the GA-K8NS variants as tested.
Tested by "nicolae788" on a board with socket 754.
- Mark "Multi-system" chassis as non-laptop case.
- Remove W836xx log requests.
We got enough (and no one is looking at them for the time being anyway).
- serprog: improve invalid reply error message, contributed by Urja Rannikko.
- Remove default include paths for MinGW.
- Disable implicit rules in the Makefile because we don't need them and they
just make the build (imperceptibly) slower.
- Enable our own strnlen() implementation not only on DJGPP but also if
HAVE_STRNLEN is not defined. This is needed to get older BSDs
(e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
- Tiny other stuff.
Corresponding to flashrom svn r1917.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Supported controllers are Promise PDC20262 (FastTrak66/Ultra66),
PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100).
At least the Ultra100 only has address lines A0-A14 wired up, limiting
addressable chip size to 32 kB. The flash chips mounted on those
controllers usually is 128 kB, i.e. parts of the flash chip are
inaccessible. As a workaround, the driver implicitly truncates the
size of all flash chips to 32 kB. Works well for the factory installed
flash.
Do NOT use as a generic programmer for chips >32 kB.
Corresponding to flashrom svn r1916.
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Found by Coverity as "CID 1348465: Resource leaks".
Corresponding to flashrom svn r1915.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This won't work for the majority of relevant commands because they use the
$(shell) function and GNU make does not relay variables exported within the
makefile to their evironment.
Corresponding to flashrom svn r1914.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Also, add a target to the makefile to build a flashrom.8.html with groff.
To fix some formatting issues this adds some indention commands as well.
Corresponding to flashrom svn r1913.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This is loosly based on the following changes of chromiumos:
- flashrom: Add default pkg-config definition.
Change-Id: I28744af0fd2d2d0bcc4569a5fbef370321691267
- Fix FT2232 feature on static builds.
Change-Id: I70d4a7bda573b64cb18429a21792455b018c4cba
Corresponding to flashrom svn r1912.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Previously we have hid almost all error messages from called tools like
pkg-config or the compiler in the "configure" step. Only exceptions were
the library checks because Carl-Daniel felt it improved usability in
case of missing headers etc.
However, this makes the output of the makefile less readable and in
the case of pkg-config fallbacks the error messages are actually
expected. Instead of throwing a part of the detailed stderr outputs
of the tools into the face of the users and completely hiding
others, write all of them into a separate log file instead.
Corresponding to flashrom svn r1911.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The parenthesis pushed the exports into a subshell thus made them useless.
Corresponding to flashrom svn r1910.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Available baud rates obviously depend on driver support, but the
CBR_ defines used so far are basically only for backwards source
compatibility with Win16, so dont bother with them.
Corresponding to flashrom svn r1909.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously, flashrom -p serprog didnt notice a completely missing dev=
string on Windows. Also, the error message shown if no device name
followed contained a misleading "/dev/...".
Corresponding to flashrom svn r1908.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
On USB-based serial connections (VCP) the requested baud rate usually
does not matter (much). Remove the arbitrary restriction and use whatever
default values the OS/hardware provides.
Corresponding to flashrom svn r1907.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
There is no good reason to abort earlier just because some options did
not stick. This should improve compatibility without negative effects. If
communication is affected by the missing flag(s) then we abort later
anyway.
Corresponding to flashrom svn r1906.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Change sp_openserport() to directly clear the O_NONBLOCK flag that
is potentially set by opening the device with O_NDELAY instead of
clearing ALL flags in serialport_config() unconditionally.
Corresponding to flashrom svn r1905.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Many distros no longer provide libftdi 0.2, and as a result,
programmers that depend on libftdi must be disabled to compile flashrom.
Luckily the libftdi API did not change significantly, so for our
purposes, we can simply use the newer headers and link to the newer
library if it is available.
Corresponding to flashrom svn r1904.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
