Handle PCI Device ID 0x0360 for MCP55 ISA bridge GPIO as well.
Tested-by: Stefan A. Scholtz
Corresponding to flashrom svn r1547.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
To tell the programmer how to handle the data on the spi bus, a flag in
the fourth byte sent with the usb command is used. The second word was
mistaken for the size of the chunks sent over usb earlier. The third
byte (first of the second word) is now set to zero. This also adds some
checks for the size of data chunks sent over usb.
Corresponding to flashrom svn r1546.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The only caller is able to check the return code and handle it
correctly.
Corresponding to flashrom svn r1545.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Some investigations have shown that the original dediprog driver waits
about 200ms after setting voltage up and before setting voltage down.
This patch adds those delays. It helps flash chips to come up in time.
Corresponding to flashrom svn r1544.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Currently spi_aai_write() is implemented without an abstraction
mechanism for the programmer driver. This adds another function
pointer 'write_aai' to struct spi_programmer, which is set to
default_spi_write_aai (renamed spi_aai_write) for all programmers
for now.
A patch which utilises this abstraction in the dediprog driver will
follow.
Corresponding to flashrom svn r1543.
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The patch that should have improved the clock divisor setting in r1537 made
it much worse: the divisor used was from an uninitialized buffer.
Corresponding to flashrom svn r1542.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The buffer management of the Bus Pirate driver has been revamped to use
grow-only buffers with a reasonable initial default size so realloc()
will not have to be called in normal operation. A side effect is the
ability to switch to a static buffer without major hassle.
Handle OOM gracefully.
Corresponding to flashrom svn r1541.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Usage: flashrom --output logfile.txt
Logfile output has at least dbg2 verbosity or screen verbosity,
whichever is greater.
Corresponding to flashrom svn r1540.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested on Linux, Windows and FreeBSD.
Acked-by: Idwer Vollering <vidwer@gmail.com>
This flash is like PMC model Pm39LV010 but capacity is 64kB.
Model ID was already defined. PREW works for me.
Corresponding to flashrom svn r1539.
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
The currently unreferenced function in sharplhf00l04.c does a standard
FWH block protection reset (writes 0 to the protection register) and a
standard FWH block erase.
Corresponding to flashrom svn r1538.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This adds an optional argument when using the ft2232_spi programmer to set
the frequency divisor. The valid values for the divisor is any even integer
between 2 and 131072.
Corresponding to flashrom svn r1537.
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Clean up cli_output.c to be more readable.
Use enum instead of #define for message levels.
Kill a few exit(0) calls.
Print the command line arguments in verbose mode.
Move actions (--list-supported etc.) after argument sanity checks.
Reduce the number of code paths which have their own
programmer_shutdown().
Corresponding to flashrom svn r1536.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Its ID was spotted in an descriptor region update by Jetway:
http://paste.flashrom.org/view.php?id=1217
Corresponding to flashrom svn r1535.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The chip features a complete 1.0 SFDP JEDEC flash parameter table and also a
vendor-specific extension table (defining voltages, lock bits etc).
NB: the MX25L6436 uses the same RDID as the MX25L6405.
Corresponding to flashrom svn r1534.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add ITE IT8707F/IT8710F detection.
Note that we autodetect those chips, but we don't handle their flash
translation features automatically yet.
Corresponding to flashrom svn r1533.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Not hooked up to the superio detection framework yet.
Corresponding to flashrom svn r1529.
Signed-off-by: David Borg <borg.db@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
In r1115 "Write protection handling for Atmel AT25*" the old
spi_write_status_register function was duplicated to send WREN and
EWSR commands respectively controlled by a new common wrapper function
spi_write_status_register without a reason. Both functions' resulting
code is equal apart from the opcode used. The code itself does also
differ in the macros used, but their value (apart from the opcode) is
equal. This patch adds a new parameter for the opcode to the helper
function which allows removal of the other one. This relies on the fact
that EWSR and WREN have the same INSIZE and OUTSIZE though. If that is
really seen as an issue, the sizes could be made parameters too.
This patch also changes the wrapper so that it no longer sets the
feature bits of the struct flash(ctx) argument. This may result in
changed output, because it no longer implicitly disables the debug
message in following executions. Since almost all chips had their
feature bits fixed in the previous commit, this is a minor problem.
Also, spi_write_status_enable has been dead code since r658 or so.
Remove it.
Corresponding to flashrom svn r1528.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
All SPI chips without a WRSR feature bit set were evaluated except the
Sanyo LF25FW203A for which no datasheet is available.
The following list includes all SPI-capable chips that still have no
WRSR feature bit set:
- AT26DF041
- AT45CS1282
- AT45DB011D
- AT45DB021D
- AT45DB041D
- AT45DB081D
- AT45DB161D
- AT45DB321C
- AT45DB321D
- AT45DB642D
All of them have no write function set and can be therefore ignored
for now.
Apart from those the generic chips are also not tagged. The opaque
flash interface should not be affected. The SFDP dummy chip is
changed to explicitly set EWSR if it can't deduce it dynamically.
The vendor detecting generic chips can't write anyway.
Corresponding to flashrom svn r1527.
Signed-off-by: Steven Zakulec <spzakulec@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
These are used in ASUS RS120-E5/PA2 servers.
GPIO pin discovered, patch prepared and
Tested-by: Geoffrey McRae
Corresponding to flashrom svn r1526.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This adds the pony_spi driver which supports the SI_Prog adapter, which
is commonly used for SPI chips with PonyProg 2000, and a custom adapter
called "SERBANG" which differs in the logic of two pins.
Corresponding to flashrom svn r1525.
Signed-off-by: Virgil-Adrian Teaca <darkstarlinux@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
And a tiny cleanup.
Corresponding to flashrom svn r1523.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Chip features an optional permanent boot block write protection.
Corresponding to flashrom svn r1522.
Signed-off-by: David Borg <borg.db@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This chip needs special command sequences in 8 bit mode. Also, 8 bit
programming needs actually 16bit double byte program.
The chip is found on the Bifferos Bifferboard, for example.
Corresponding to flashrom svn r1521.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add -I/usr/pkg/include to NetBSD/Dragon Fly build example CPPFLAGS.
This is needed to pick up libftdi.
Corresponding to flashrom svn r1519.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This solution is copied from ft2232_spi and is equally hacky.
Thanks to M.K. for investigating the history of <linux/spi/spidev.h>, which
led to a hopefully more robust check.
Corresponding to flashrom svn r1517.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Primary IDs SMBus controller, secondary IDs MCH.
The reverse engineering was done by Michael Karcher.
Андрей Тимираев <dark_prof@mail.ru> reported the problem, but did not
reply (yet) to our propsed fix.
Corresponding to flashrom svn r1516.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
The submission of zero-sized read requests in a write-only transaction
fails at least for omap2_mcspi drivers and is pointless in general.
This patch does not address the implementation of zero-sized writes (which
would need to skip the write command), as there are no flash transactions
not starting with a command.
Corresponding to flashrom svn r1513.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Previously we relied on a correctly set up state.
Also, we start to rely on the shutdown function for cleanup after
registering it, i.e. we no longer explicitly call close(fd) after
register_shutdown().
Corresponding to flashrom svn r1512.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The ITE IT87 SPI driver uses a trick to speed up reading and writing:
If a flash chip is 512 kByte or less, the flash chip can be completely
mapped in memory and both read and write accesses are faster that way.
The current IT87 SPI code did use the parallel programmer interface for
memory mapped reads and writes, but that's the wrong abstraction. It has
been fixed to use mmio_read*/mmio_write* for that purpose.
The Winbond W83627 SPI driver uses the same trick in its read path for
all supported chip sizes. Fix it the same way.
Switch internal_chip_readn to use mmio_readn as proper abstraction.
Kudos to Michael Karcher for spotting the bugs.
Tested-by: Johan Svensson <flashrom.js@crypt.se>
Corresponding to flashrom svn r1511.
Reported-by: Johan Svensson <flashrom.js@crypt.se>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
SFDP parameter table reads expect a dummy byte between written data
(opcode+address) and read data on the SPI bus. Read that dummy byte
instead of writing it to be compatible with all programmer drivers.
Reduce SFDP parameter table read chunk size from 8 to 2 to handle
programmers with small readcount limits.
Corresponding to flashrom svn r1506.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Sfdp_add_uniform_eraser checks for existing erasers. Due to a bug it
looked for eraser slots that have no erase functions set instead of
those that have one set.
Postpone adding an erase function for the special 4k block erase
opcode until we know the flash chip size and add an additional check
to sfdp_add_uniform_eraser.
Fix the output of the parameter table contents.
This patch fixes the index used to retrieve the eraser types, which
was off one double word.
Refine some messages and add a few further debugging prints.
Corresponding to flashrom svn r1505.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The vendor enable does some other funky stuff with MTRRs/MSRs, SMIs,
cache and legacy ISA address forward twiddling. I would only use
this patch to read and verify the existing contents, just to be safe.
The PCI IDs of the onboard devices do contain no subsystem IDs at all.
Probing and reading was
Tested-by: Ville Skyttä <ville.skytta@iki.fi>
See http://www.flashrom.org/pipermail/flashrom/2010-October/005256.html
Corresponding to flashrom svn r1501.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.
This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.
Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)
Tested-by: David Hendricks <dhendrix@google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog
Thanks also to Michael Karcher for his comments and preliminary review!
Corresponding to flashrom svn r1500.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
The linux_spi driver is now enabled by default on Linux.
A man page entry and a line in --list-supported output have been added.
Corresponding to flashrom svn r1498.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
The sections describing the various options of the internal and dummy
programmers have grown out of proportions. This patch adds some headlines
to devide the unrelated topics a bit (with .TP commands). The previous indented
paragraphs for the various programmers were transformed to subsections (.SS).
Also, rephrase the documention related to laptops completely to make it
less redundant and more informative.
Document the laptop=this_is_not_a_laptop internal programmer parameter
Change the contact info in the bugs section by removing the trac
reference and adding IRC (and the pastebin) instead.
Remove some superfluous white space and a .RE (restore indentation) command.
Corresponding to flashrom svn r1497.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Forced read functionality was disabled when programmer registration was
merged in r1475.
We now support registering more than one controller at once for each bus
type. This can happen e.g. if one SPI controller has an attached flash
chip and one controller doesn't. In such a case we rely on the probe
mechanism to find exactly one chip, and the probe mechanism will
remember which controller/bus the flash chip is attached to. A forced
read does not have the luxury of knowing which compatible controller to
use, so this case is handled by always picking the first one. That may
or may not be the correct one, but there is no way (yet) to specify
which controller a flash chip is attached to.
Corresponding to flashrom svn r1496.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
MinGW uses standard Windows C libraries and those apparently don't
support %hhx for sscanf into a uint8_t. SCNx8 isn't available either.
Corresponding to flashrom svn r1495.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
