Move boards which had an IT87* SPI board enable from the board enable
list to the OK list.
Mark the Gigabyte GA-MA78GPM-DS2H as OK.
Change the it87spi forced port parameter to it87spiport=...
Fix incorrect indentation in the man page.
Tested by Ward Vandewege on both variants of the Gigabyte GA-M57SLI-S4
http://www.flashrom.org/pipermail/flashrom/2010-March/002712.html
Tested by 李彥學 (Ian-Xue Li) on the Gigabyte GA-MA78GPM-DS2H
http://www.flashrom.org/pipermail/flashrom/2010-March/002723.html
Corresponding to flashrom svn r983.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>
- Fix coding-style, whitespace, and indentation in a few places.
- Consistently use the same spelling ("Super I/O") everywhere.
Corresponding to flashrom svn r933.
- Make some flashrom stdout output look a bit nicer.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The message printing code greatly exceed the 80 character limit. I can
reformat it on request to obey the limit.
Intended behaviour:
on untested boards an explanation of that status is printed and the board
enable code is not run, unless the option "boardenable=force" has been
passed to the internal programmer.
Corresponding to flashrom svn r919.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Linking in support for the internal programmer doesn't make sense if you
only need hardware (ioport, memory) access.
Note: This patch was created by "svn cp internal.c hwaccess.c" and then
removing stuff from both files. That's why you can't apply the patch
as-is before running the svn cp.
Corresponding to flashrom svn r898.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
If a board is not uniquely identifiable by PCI device/subsystem IDs, a
string can be specified to be looked for (case-sensitive, substring or
anchored) for now in one of the following DMI items in addition to matching
the PCI IDs:
- System Manufacturer
- System Product Name
- System Version
- Baseboard Manufacturer
- Baseboard Product Name
- Baseboard Version
Strings are anchored re-like (^ at the beginning, $ at the end), but
there are no plans to support full regular expressions and matched to any
of the mentioned fields.
The match is only made if DMI info is available and the string matches.
If no DMI info is available and the PCI IDs match, a warning is printed
as the board can not be autodetected.
It's still open to discussion whether we add an DMI override switch to
specify a string that will definitely match, and whether this switch is
only used if no DMI is available or whether it overrides or augments DMI
data.
DMI data is currently read using dmidecode. This tool is available for
all major platforms except MacOS X. I heard that there also is a MacOS X
version of dmidecode, but didn't investigate that.
Corresponding to flashrom svn r874.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Some programmers (most notably FT2232SPI) use fallback_* and noop_*,
but those functions lived inside internal.c and were unavailable if no
PCI-based programmers were compiled in.
Move those functions to the new file programmer.c. Thanks to Patrick
Georgi for finding this.
Corresponding to flashrom svn r829.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Move that function to udelay.c and compile internal.c only if really
needed. physmap.c is only needed if the programmer is internal or a PCI
card. Make its compilation conditional.
Corresponding to flashrom svn r822.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
We could run it after chipset enable, but it definitely has to happen
before board enable because the board enable usually accesses the
SuperI/O. With this patch, it is possible to add a struct superio to the
board enable table for more accurate matching in case subsystem IDs are
ambiguous. This patch focuses on the generic infrastructure aspect and
on support for IT8712F/IT8716F.
Thanks go to Adrian Glaubitz and Ward Vandewege for testing.
Corresponding to flashrom svn r813.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Make various pieces of code conditional on support for internal
programming. Code shared between PCI device programmers and onboard
programming is now conditional as well.
It is now possible to build only with dummy support:
make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no
CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no
This allows building for a specific use case only, and it also
facilitates porting to a new architecture because it is possible to
focus on highlevel code only.
Note: Either internal or dummy programmer needs to be compiled in due to
the current behaviour of always picking a default programmer if -p is
not specified. Picking an arbitrary external programmer as default
wouldn't make sense.
Build and runtime tested in all 1024 possible build combinations. The
only failures are by design as mentioned above.
Corresponding to flashrom svn r797.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
The two existing SiS chipset enables (compared to the 28 in this patch)
were refactored, and one of them was fixed.
A function to match PCI vendor/class combinations was added to generic
code.
Tested on the "Elitegroup K7S5A". Results are somewhat unexpected (some
PCI settings seem to be inaccessible, but it still works).
This is not based on any docs, but rather on detailed analysis
of existing opensource code for some of the chipsets.
Thanks to for Adrian Glaubitz testing.
Corresponding to flashrom svn r759.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Example make commandline if you want only internal programmers:
make CONFIG_FT2232SPI=no CONFIG_SERPROG=no CONFIG_NIC3COM=no
CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_DUMMY=no
Of course, all of the CONFIG_* symbols can be mixed and matched as
needed. CONFIG_FT2232SPI is special because even if it is enabled, make
will check if the headers are available and skip it otherwise.
Corresponding to flashrom svn r724.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Even a failing chipset init (maybe due to unknown chipset) could still
get us reasonable probe results or at least forced reads.
Corresponding to flashrom svn r708.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
FT2232 and IT87 programmers used functions of the dummy programmer
instead of fallback functions.
The dummy programmer is a "real" programmer with possible side effects
and its functions should not be abused by other programmers. Make
FT2232 and IT87 use official fallback functions instead. Create
fallback_shutdown(). Create fallback_chip_writeb(). Convert the
programmer #defines to an enum.
Corresponding to flashrom svn r678.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Add chip_{read,write}n to the external flasher infrastructure which
read/write n bytes at once.
Fix a few places where the code used memcpy/memcmp although that is
strictly impossible with external flashers.
Place a FIXME in the layout.c code because usage is not totally clear
and needs to be fixed to support external flashers.
As a nice side benefit, we get a noticeable speedup for builtin flash
reading which is now a memcpy() of the full flash area instead of a
series of single-byte reads.
Corresponding to flashrom svn r579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add external programmer delay functions so external programmers can
handle the delay on their own if needed.
Corresponding to flashrom svn r578.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Some MMIO accesses used volatile, others didn't (and risked
non-execution of side effects) and even with volatile, some accesses
looked dubious.
Since the MMIO accessor functions and the onboard flash accessor
functions are functionally identical (but have different signatures),
make the flash accessors wrappers for the MMIO accessors.
For some of the conversions, I used Coccinelle. Semantic patch follows:
@@ typedef uint8_t; expression a; volatile uint8_t *b; @@ - b[a] + *(b
+ a) @@ expression a; volatile uint8_t *b; @@ - *(b) |= (a); + *(b) =
*(b) | (a); @@ expression a; volatile uint8_t *b; @@ - *(b) = (a); +
mmio_writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + mmio_readb(b) @@
type T; T b; @@ ( mmio_readb | mmio_writeb ) (..., - (T) - (b) + b )
Corresponding to flashrom svn r524.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Uwe tested read, write, erase with this patch on a random board to make
sure nothing breaks.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Build-tested on 32bit x86.
Corresponding to flashrom svn r521.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Use chipaddr instead of volatile uint8_t * because when we access chips
in external flashers, they are not accessed via pointers at all.
Benefits: This allows us to differentiate between volatile machine
memory accesses and flash chip accesses. It also enforces usage
of chip_{read,write}[bwl] to access flash chips, so nobody will
unintentionally use pointers to access chips anymore. Some unneeded
casts are removed as well. Grepping for chip operations and machine
memory operations doesn't yield any false positives anymore.
Compile tested on 32 bit and 64 bit Linux.
Corresponding to flashrom svn r519.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The emulation works by splitting 32 bit accesses into 16 bit accesses
and 16 bit accesses into to 8 bit accesses. That way, external flashers
can mix and match the amount of emulation they need.
Corresponding to flashrom svn r517.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Factor out portable iopl()-style code into a global function which all
programmers can use, add missing close() call.
Corresponding to flashrom svn r511.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add support for users to specify a certain NIC via PCI bus:slot.func
notation, in case there are multiple NICs in one system.
Usage: flashrom -p nic3com=bb:ss.f
Corresponding to flashrom svn r510.
Signed-off-by: Christian Ruppert <spooky85@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function
As a side benefit, this will allow us to undo chipset write enable
during shutdown.
Tested by Uwe on real hardware.
Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
