There is no sign of BBAR (BIOS Base Address Configuration Register)
in the public datasheet (or specification update) of the ICH8. Also,
the offset of that register has changed between ICH7 (SPIBAR + 50h)
and ICH9 (SPIBAR + A0h), so we have no clue if or where it is on
ICH8. Better don't try to touch it at all and assume/hope it is 0.
Corresponding to flashrom svn r1445.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Add headers for the columns and some decoding into human readable format.
Corresponding to flashrom svn r1444.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Based on the work of Matthias 'mazzoo' Wenzel this patch adds pretty
printing of those ICH/PCH flash descriptor sections that are
cached/mapped by the chipset (and which are therefore reachable via
FDOC/FDOD registers).
this includes the following:
- content section:
describes the image and some generic properties (number of
sections, offset of sections, PCH/ICH and MCH/PROC strap
offsets and lengths)
- component section:
identify the different SPI flash chips and their capabilities.
- region section
similarly to a partition table this describes the different regions.
the content of FLREG* is derived from this section.
- master section
defines SPI master (host, ME, GbE) access rights of the
individual regions. the content of PR* is derived from this section.
this is only a part of the data included in the descriptor. other
information can be retrieved from a complete binary dump of the
descriptor region only.
this patch also adds macros and pretty printing for "Vendor Specific
Component Capabilities" registers: there are two of them: lower and
upper. they describe the properties of the address space divided by
FPBA (which allows to use multiple flash chips or partitions with
different properties). the properties of all supported flash chips
(together with their RDIDs) are stored in the same format in table
in a descriptor section (which is used by the ME apparently). a
later patch will use the macros outside of ichspi.c which is the
reason why the prettyprinting function and the register bit macros
are not defined in ichspi.c but ich_descriptors.h (else they would
be moved in the follow-up patch).
because this patch relies on (compiler) implementation-specific
layouting of bit-fields, it checks for correct layout before taking
any action on runtime.
Corresponding to flashrom svn r1443.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Corresponding to flashrom svn r1414.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
- add ich_fill_data to fill the chipset registers from an array
- add ich_read_data to copy the data from the chipset register into an array
- replace the existing code with calls to those functions
- minor cosmetic changes
Corresponding to flashrom svn r1409.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE
where possible, wrap overly long line, etc.
Compile-tested. There should be no functional changes.
Corresponding to flashrom svn r1397.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
It's shorter to type, and we have less problems with the 80 column limit.
Corresponding to flashrom svn r1396.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Intel document 307013 (ICH7 datasheet) section 21.1.9 does only
define PBR[0] (at SPIBAR + 60h) to PBR[2] (SPIBAR + 68h). SPIBAR + 6Ch
and following are not defined, but we were printing them as PBR[3]
anyway. i could not find any references to PBR[3] in documentation of
other related chips (NM10, atom e6xx) either, hence kill it.
Corresponding to flashrom svn r1381.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
We print the address registers for ICH7 and VIA at init.
We should do so for ICH9 too.
Corresponding to flashrom svn r1365.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: David Hendricks <dhendrix@google.com>
Less code, documenting better what the differences are (i.e. offset of BBAR only).
Corresponding to flashrom svn r1360.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
'+' does have a quite high precedence so "calling" those macros with a
term including weaker operators in the off parameter may have unexpected
consequences.
Corresponding to flashrom svn r1359.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- add macros for FRAP, FREG0, PR0-PR4 and BBAR
- eliminate magic numbers representing those registers and some other bits too
- remove printing out the contents of FDOC because it is useless
Corresponding to flashrom svn r1334.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Also, explain the transformation of the read/write array/count in
ich_spi_send_command better.
Corresponding to flashrom svn r1333.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- introduce offset macros and use them to (re)define the existing mask macros
- fix masks of SSFC_COP, SSFC_DBC, SSFC_SCF (were single-bit masks erroneously)
- add comments
- rename SSFS_CDS to SSFS_FDONE (abbr. used in datasheet; not in SSFS but HSFS)
- use those for refactoring and magic number elemination.
following patch uses them for pretty printing.
Corresponding to flashrom svn r1328.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- missing spaces in code and output
- improved documentation/naming/output
- missing line breaks in spi probing functions
Corresponding to flashrom svn r1321.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
This patch combines three previously posted patches in a revised form.
one is even stolen from Stefan Reinauer (remove umlauts from man page).
Corresponding to flashrom svn r1317.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Corresponding to flashrom svn r1299.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Reversible MMIO space writes now use rmmio_write*().
Reversible PCI MMIO space writes now use pci_rmmio_write*().
If a MMIO value needs to be queued for restore without writing it,
use rmmio_val*().
MMIO space writes which are one-shot (e.g. communication with some chip)
should continue to use the permanent mmio_write* variants.
Corresponding to flashrom svn r1292.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David tested it successfully on some NM10/ICH7 platforms which switch
between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM).
Acked-by: David Hendricks <dhendrix@google.com>
Corresponding to flashrom svn r1291.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Use 16-bit values for bit masks in 16-bit registers.
Check for SPI Cycle In Progress and wait up to 60 ms.
Do not touch reserved bits.
Reduce SPI cycle timeout from 60 s to 60 ms.
Clear transaction errors caused by our own SPI accesses.
Add better debugging in case the hardware misbehaves.
Corresponding to flashrom svn r1281.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch reduces the stack usage by declaring 'const' stack variables
as 'static const' so they end up in the .rodata section instead of being
copied from there to the stack for every invocation of the corresponding
function.
As a plus we end up in having a smaller binary as the "copy from .rodata
to stack" code isn't emitted by the compiler any more (roughly -100
bytes).
Corresponding to flashrom svn r1252.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Handle BBAR on VIA.
Handle SPI lockdown on VIA.
Corresponding to flashrom svn r1236.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
(At least) for the QM57 which i have tested an additional patch was
needed as some reserved bits in the "Software Sequencing Flash Control
Register" (SSFC) needs to be programmed to 1 in the QM57.
Corresponding to flashrom svn r1137.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Corresponding to flashrom svn r1112.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Smarter version could decide whether SPI is vital or not depending on
straps. Straps are currently implemented for ICH7. EP80579 is in the comment,
PCH of 5 Series/3400 Series has "LPC, reserved, PCI, SPI".
Corresponding to flashrom svn r1098.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Actually check if the unlock worked instead of just assuming it worked.
Corresponding to flashrom svn r1082.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
However, wrap the write functions in a compat layer to allow converting
the rest of flashrom later. Tested on Intel NM10 by David Hendricks.
Corresponding to flashrom svn r1080.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Corresponding to flashrom svn r1068.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
ICH SPI can enforce address restrictions for all accesses which take an
address (well, it could if the chipset implementation was not broken).
Since exploiting the broken implementation is harder than conforming
to the address restrictions wherever possible, conform to the address
restrictions instead. This patch eliminates a lot of transaction errors
people were seeing on chip probe.
Corresponding to flashrom svn r1016.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Corresponding to flashrom svn r1013.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Every SPI programmer driver had its own completely different chip write
implementation, and all of them were insufficiently commented. Create
spi_write_chunked as a copy of spi_read_chunked and convert all SPI
programmers to use it. No functional changes except: - Bus Pirate uses
12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes
instead of 1 Byte writes
Corresponding to flashrom svn r1005.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: David Hendricks <dhendrix@google.com>
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Corresponding to flashrom svn r985.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This megapatch rewrites substantial parts of ICH SPI to actually do
what the SPI layer wants instead of its own weird idea about commands
(running unrequested commands, running modified commands). Besides that,
there is a fair share of cleanups as well.
- Add JEDEC_EWSR (Enable Write Status Register) to default commands. -
Mark a no longer used opcode/preopcode table as unused. - Declare all
commands as non-atomic/standalone by default. The ICH SPI driver has
no business executing commands (preopcodes) automatically if they were
not requested. - Automatically adjust preopcode/opcode pairings (like
WREN+ERASE) based on what the SPI layer requested. The ICH SPI driver
has no business executing altered opcode pairs as it sees fit. - Fix
incomplete initialization in the case of a locked down chipset. Leaving
the first 4 opcodes with uninitialized pairings had unpredictable
results. - switch() exists for a reason. Nested if() checking on the
same variable is an interesting style. - Actually check if the requested
readcnt/writecnt for a command is supported by the hardware instead
of delivering corrupt/incomplete commands and data. - If a command
has unsupported readlen/writelen, complain loudly to the user. - Use
find_opcode instead of open-coding the same stuff in a dozen variations.
- Introduce infrastructure for updating the command set of unlocked
chipsets on the fly.
Corresponding to flashrom svn r894.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
Programmer debug messages during programmer init/shutdown are useful
because they print hardware settings and desired configuration.
They help in getting a quick overview of hardware and software state on
startup and shutdown.
Programmer debug messages during flash chip access are mostly a
distraction in logs and should only be enabled if someone is having
problems which are suspected to stem from a programmer hardware or
programmer software bug. Disable those messages by default, they can be
reenabled by #define COMM_DEBUG in the affected programmer file.
An added benefit is a tremendous size reduction in verbose
probe/read/write/erase logs because only flash chip driver messages
remain. In some cases, logs will shrink from 65 MB to 10 kB or less.
The right(tm) fix would be two different debug levels (DEBUG and SPEW)
and the ability to differentiate between programmer debug messages and
flash chip debug messages. Until the design for the message printing
infrastructure is finished, this is the best stop-gap measure we can
get.
Corresponding to flashrom svn r834.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audioahcked@gmail.com>
The existing code does not work for all SPI chips, and it just was a
band-aid to cope with locked down chipsets back in a time when there was
no eraseblock infrastructure.
Basically, this unbreaks a few SPI chips on ICH.
Corresponding to flashrom svn r777.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Since we don't have any debug level printing infrastructure yet, I
propose to kill the obnoxious debug message in ichspi.c which was added
to check for correct PREOP handling.
We know the code works fine (after getting a few reports over 100 MB
long) and there's no point in keeping it around anymore. If there is any
desire, we can reinstate it as print_spew or whatever once the debug
level infrastructure is merged, but at that point we probably just are
happy that the debug output isn't there anymore.
Corresponding to flashrom svn r753.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
With the multicommand infrastructure I introduced in r645, it became
possible to integrate ICH SPI preopcodes cleanly into the flashrom
design.
The new code checks for every opcode in a multicommand array if it is a
preopcode. If yes, it checks if the next opcode is associated with that
preopcode and in that case it simply runs the opcode because the correct
preopcode will be run automatically before the opcode.
Corresponding to flashrom svn r727.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
The __func__ variant is standardized in C99 and recommended to be
used instead of __FUNCTION__ in the gcc info page.
Only _very_ old versions of gcc did not know about __func__, but we've
been using both __func__ and __FUNCTION__ for a long while now, and
nobody complained about this, so all our users seem to use recent
enough compilers.
Corresponding to flashrom svn r711.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
