Thanks to Harald Gutmann for testing.
Corresponding to flashrom svn r620.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Thanks to Wangji for testing and pointing out that EN25* chips were
unsupported, which was handled in r580 and r592.
Corresponding to flashrom svn r619.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Turns out that the GIGABYTE GA-7ZM _does_ work fine if you disable
the BIOS flash protection option _and_ remove jumper JP9 on the board
(d'oh!).
This board can decode 512 KB chips just fine (not just 256 KB).
Corresponding to flashrom svn r618.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The board can decode 256 KB only (i.e., not 512 KB) it seems.
Corresponding to flashrom svn r617.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
FYI, this board can only decode 256 KB chips (not 512 KB ones) unfortunately.
The highest address line (A18) is not connected on this board.
The it8705f_write_enable() is kept generic enough so it can be reused for other
board-enables, possibly in the board_biostar_p4m80_m4() for example, but that
shouldn't be touched for now, unless someone can test the code.
Corresponding to flashrom svn r616.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Luc Verhaegen <libv@skynet.be>
- Move board_info_url struct to print.c, doesn't have to be global.
- Simplify flashrom.c a bit by moving stuff to print.c.
Eliminate two now-useless mini-functions in print.c.
- Add a note that the wiki page contents are semi-automatically generated.
- Mention date of last wiki page update as well as the flashrom revision
that was used to generate the wiki output.
- Also generate list of supported laptops in -z output now.
- Add some more board URLs.
- Add a boards_notes[] table to allow for arbitrary footnotes/comments for
each board in the table. All notes will automatically be turned into
wiki footnotes with correct numbers and will appear at the end of the
respective table.
Corresponding to flashrom svn r615.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
- Convert #defines for strings in print.c to 'const char *'s.
- Add missing entries in the board URL tables.
- Add a few more board URLs, partly contributed by 'Alien' at
http://www.coreboot.org/index.php?title=flashrom&curid=1765&diff=8626&oldid=8625&rcid=3586
- Fix sort order of board lists.
- Add laptops to URL list (not yet used).
- Fix typo.
- Fix EPIA-EX15000/NX15000 names (append "G").
Corresponding to flashrom svn r614.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Also, add support for the Silicon Image 3112(A) SATA controller.
Both have been tested by Andrew Morgan <ziltro@ziltro.com> on hardware
and work fine.
Corresponding to flashrom svn r613.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
Thanks Clark Rawlins <clark@bit63.org> for the report!
Corresponding to flashrom svn r612.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
The new makefile structure uses indirection (.features->features) to
work around a gmake bug which resulted in immediate premature evaluation
of variable definitions with deferred evaluation.
Corresponding to flashrom svn r611.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
ATX board for P3; Intel 82810e GMCHe, Intel 82801AA ICH and SMSC
LPC47U332 super I/O.
Corresponding to flashrom svn r609.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Luc Verhaegen <libv@skynet.be>
It is ignored by almost every chip and does not work for external
flashers. Plus, it gives the user a false sense of security in some
corner cases.
Corresponding to flashrom svn r608.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add a --list-supported-wiki / -z option which outputs the currently
supported flash chips (and their status, size, and type), chipsets (plus
status), mainboards (plus status), and external PCI devices usable as
programmer to stdout.
This allows for very easy pasting into the http://coreboot.org/flashrom
page, so we can keep that page up-to-date without much hassle.
The list of boards is mostly new (known good ones which don't need
write-enable code, and known-bad ones) and also lists URLs to the
vendor's mainboard pages.
Corresponding to flashrom svn r607.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Corresponding to flashrom svn r606.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Mark as OK:
- ASRock A770CrossFire (reported by RIVANVX on IRC, no email available).
User verified read and write with -wv, which VERIFIED OK.
Mark as non-working for now:
- HP/Compaq nx9010 (laptop, reported by Murawski Mateusz <matowy@tlen.pl>).
Hangs upon 'flashrom -V' (needs hard power-cycle then).
- Elitegroup K7VTA3 (reported by Uwe Hermann <uwe@hermann-uwe.de>).
Needs board-enable.
- GIGABYTE GA-7ZM (reported by Uwe Hermann <uwe@hermann-uwe.de>).
Needs board-enable.
Corresponding to flashrom svn r605.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Content taken from current wiki page.
Corresponding to flashrom svn r604.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Drop no longer needed MAX macro, we have a max() function.
Corresponding to flashrom svn r601.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
This shortens the code a lot and makes it more readable.
Corresponding to flashrom svn r600.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Also, list how many chips/chipsets/boards we support in 'flashrom -L'.
Corresponding to flashrom svn r599.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
FTDI support is autodetected during compilation.
Paul writes:
There are certainly possible improvements: The code has hard-coded
values for which interface of the ftdi chip to use (interface B was
chosen because libftdi seems to have trouble with A right now), what
clock rate use for the SPI interface (I've been running at 30Mhz, but
the patch sets it to 10Mhz), and possibly others. I think this means
that per-programmer options might be a good idea at some point.
Carl-Daniel writes:
There is one additional FIXME comment in the code, but AFAICS that
problem is not solvable with current libftdi.
Corresponding to flashrom svn r598.
Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r597.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Joseph Smith <joe@settoplinux.org>
That means you can tell flashrom to read exactly bytes 12345-56789
(start 12345, length 44445) and it will not fetch a single byte more.
Uwe tested this on one LPC, one SPI, and one parallel flash board.
Corresponding to flashrom svn r596.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
And even when it checks if the erase worked, the result of that check is
often ignored.
Convert all erase functions and actually check return codes
almost everywhere.
Check inside all erase_* routines if erase worked, not outside.
erase_sector_jedec and erase_block_jedec have changed prototypes to
enable erase checking.
Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box.
Corresponding to flashrom svn r595.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Flash.h not only contains function prototypes and general settings, it
also has a huge chunk of chip and vendor IDs in the middle.
Split them out into a separate flashchips.h and adjust #include wherever
needed.
Corresponding to flashrom svn r594.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
This strangely breaks with gmake on FreeBSD, but seems to work with make
on Linux.
Thanks Idwer Vollering <vidwer@gmail.com> for noticing and testing.
Corresponding to flashrom svn r593.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Corresponding to flashrom svn r591.
Signed-off-by: Arjan Koers <0h3q2rmn2bdb@list.nospam.xutrox.com>
Acked-by: Bari Ari <bari@onelabs.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
I sucessfully tested all operations on a Pm29F002T chip. The Pm29F002B is
untested but I assume it should also work.
Corresponding to flashrom svn r590.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
This was partly due to a design problem in the abstraction layer.
There should be exactly two different functions for reading SPI chips:
- memory mapped reads
- SPI command reads.
Each of them should be contained in a separate function, optionally
taking parameters where needed.
This patch solves the problems mentioned above, shortens the code and
makes the code logic a lot more obvious.
Since open-coding the min() function leads to errors, include it in this
patch as well.
Corresponding to flashrom svn r589.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
In particular, it should no longer be necessary to patch the makefile
for hassle-free compilation.
The targets are:
make export
make tarball
Both preserve svn revisions and the exported tree does not depend on
subversion in any way or shape.
Documentation for this feature has been added to README.
We need this for five reasons:
1. Packagers currently have to patch flashrom source to compile it on
systems without subversion. We should make it easier for them.
2. Snapshot tarballs currently have a .svn 1.5 directory included but
this will cause errors for users with older svn 1.4. Not requiring
subversion for snapshot compilation is best.
3. Since packagers seldom the svn revision in their fixup patches, some
packages out there have incorrect or no revision, only major version
numbers.
4. Releasing a new version of flashrom needs too many changes to the
makefile which have to be reverted instantly after the release. That is
unnecessary churn.
5. Making a release is easy with the change. Update the major version,
then run "make tarball".
Corresponding to flashrom svn r587.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Please complain in case there are errors here, but I'm pretty sure the
headers are correct.
Corresponding to flashrom svn r586.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Not only does this violate the principle of least surprise, it also
caused one bug where -Ewv was specified and the flash ended up being
empty.
Support only one operation at a time. As a side benefit, this allows us
to clean up main() quite a bit.
Corresponding to flashrom svn r585.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add timing info to some flash chips.
Corresponding to flashrom svn r584.
Signed-off-by: Mateusz Murawski <matowy@tlen.pl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
There are multiple albatron pm266a boards which all share the same bios
image. This means that both the board enable and the subsystem ids are
exactly the same.
The board enable is the same as the epox EP-8K5A2, namely only raising
memw on the superio.
Corresponding to flashrom svn r581.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Mateusz Murawski <matowy@tlen.pl>
Some IDs were already in flash.h. EN25B05 EN25B10 EN25B20 EN25B40
EN25B80 EN25B16 EN25B32 EN25B64 EN25F40 EN25F80 EN25F16
EN25P* are supported as well, but they seem to be identical to EN25B.
Corresponding to flashrom svn r580.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Add chip_{read,write}n to the external flasher infrastructure which
read/write n bytes at once.
Fix a few places where the code used memcpy/memcmp although that is
strictly impossible with external flashers.
Place a FIXME in the layout.c code because usage is not totally clear
and needs to be fixed to support external flashers.
As a nice side benefit, we get a noticeable speedup for builtin flash
reading which is now a memcpy() of the full flash area instead of a
series of single-byte reads.
Corresponding to flashrom svn r579.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Add external programmer delay functions so external programmers can
handle the delay on their own if needed.
Corresponding to flashrom svn r578.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Urja Rannikko <urjaman@gmail.com>
I finally found the machine (doesn't belong to me) where I originally tested
this board as non-working and I can confirm that all operations work fine now
(since the nForce2 patch in r548).
Corresponding to flashrom svn r571.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
