mirror of
https://review.coreboot.org/flashrom.git
synced 2025-04-28 15:33:42 +02:00
b0d0f631bb
There are multiple albatron pm266a boards which all share the same bios image. This means that both the board enable and the subsystem ids are exactly the same. The board enable is the same as the epox EP-8K5A2, namely only raising memw on the superio. Corresponding to flashrom svn r581. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Mateusz Murawski <matowy@tlen.pl>
-------------------------------------------------------------------------------
flashrom README
-------------------------------------------------------------------------------
flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash,
or SPI.
(see http://coreboot.org for details on coreboot)
Build Instructions
------------------
To build flashrom you need to install the following packages or ports:
Linux et al:
* pciutils
* pciutils-devel / pciutils-dev / libpci-dev
* zlib-devel / zlib1g-dev
On FreeBSD, you need the following ports:
* devel/gmake
* devel/libpci
To compile on Linux, use:
make
To compile on FreeBSD, use:
gmake
To compile on Solaris, use:
gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \
CFLAGS=-O2
To compile on DragonFly BSD, use:
ln -s /usr/pkg/include/pciutils pci
gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz"
To compile and run on Darwin/Mac OS X:
Install DirectIO from coresystems GmbH.
DirectIO is available at http://www.coresystems.de/en/directio.
Installation
------------
In order to install flashrom and the manpage into /usr/local, type:
sudo make install
For installation in a different directory use DESTDIR, e.g. like this:
sudo make DESTDIR=/usr install
Usage / Options
---------------
Please see the flashrom(8) manpage.
Exit status
-----------
Please see the flashrom(8) manpage.
coreboot Table and Mainboard Identification
--------------------------------------------
Please see the flashrom(8) manpage.
ROM Layout Support
------------------
Please see the flashrom(8) manpage.
Supported Flash Chips / Chipsets / Mainboards
---------------------------------------------
Please check the output of 'flashrom -L' for the list of supported
flash chips, chipsets/southbridges, mainboards, and flash programmers.
Website
-------
The official flashrom website is:
http://coreboot.org/Flashrom